wince7烧写失败
各位大神好，小弟在按照手册烧写WINCE7的时候总是卡在开机画面处，DWN里的代码如下希望各位大神指点迷津~~Welcome! This tool just for TE/OK6410
+OALArgsInit()
SocID:0x36410101
Arguments area is initialized
-OALArgsInit()
INFO: (unsigned)C_IsrHandler : 0x800668C4
INFO: (unsigned)ASM_IsrHandler : 0x80069F80
INFO: (unsigned)pISR : 0xEA01A7D8
HSMMC init
Setting registers for the EPLL (for SDCLK) : SYSCon.
Setting registers for the GPIO.
Setting registers for the EPLL : HSMMCCon.
#### this SD card is made on SPEC 2.0
This SD card is made on SPEC 2.0
This SD card is High Capacity
CardSize: 7774208 sector
ClockConfig() Card Working Frequency = 24MHz
BP_Init
++FMD_Init() ****
FMD_Init() : Read ID = 0x0000ecd5
FMD_Init() : NUM_OF_BLOCKS = 4096
FMD_Init() : PAGES_PER_BLOCK = 128
FMD_Init() : SECTORS_PER_PAGE = 8
--FMD_Init()
FMD_GetInfo() : NUMBLOCKS = 4096(0x1000), SECTORSPERBLOCK = 128(0x80), BYTESPERSECTOR = 4096(0x1000)
FMD_GetInfo() : NUMBLOCKS = 4096(0x1000), SECTORSPERBLOCK = 128(0x80), BYTESPERSECTOR = 4096(0x1000)
wNUM_BLOCKS : 4096(0x1000)
++InitializeDisplay()
--InitializeDisplay()
Press to launch image stored on boot media, or to enter boot monitor.
Initiating image launch in 0 seconds.
Starting auto-download ...
Erasethe block '0..3'
System ready!
Preparing for download...
IsCardInserted
f_mount return = 0x0
FileInfo.fsize = 0x2000
FileInfo.fsize = 0x2000
FileInfo.fsize = 0x2000
g_pDownPt = 0xA300211B
BL_IMAGE_TYPE_MANIFEST
BL_IMAGE_TYPE_UNKNOWN
Download BIN file information:
-----------------------------------------------------
: Base Address=0x0Length=0x2000
-----------------------------------------------------
Stepldr image
ImageStart = 0x0, ImageLength = 0x2000, LaunchAddr = 0x0
Completed file(s):
-------------------------------------------------------------------------------
: Address=0x0Length=0x2000Name="stepldr.nb0" Target=RAM
BP_InitiSighForSlcMlc = 1
++FMD_Init() ****
FMD_Init() : Read ID = 0x0000ecd5
FMD_Init() : NUM_OF_BLOCKS = 4096
FMD_Init() : PAGES_PER_BLOCK = 128
FMD_Init() : SECTORS_PER_PAGE = 8
--FMD_Init()
FMD_GetInfo() : NUMBLOCKS = 8192(0x2000), SECTORSPERBLOCK = 8(0x8), BYTESPERSECTOR = 2048(0x800)
dwImageLength = 0x2000
dwNumBlocks = 0x1
dwBlock(0x0) X g_FlashInfo.wSectorsPerBlock(0x8) = 0x0
dwBytesPerBlock : 16384
INFO: Step loader image stored to Smart Media.Please Reboot.Halting...
IsCardInserted
FileInfo.fsize = 0x27737
FileInfo.fsize = 0x27737
g_pDownPt = 0xA3027737
BL_IMAGE_TYPE_BIN
Download BIN file information:
-----------------------------------------------------
: Base Address=0x80030000Length=0x28afc
-----------------------------------------------------
Eboot image
rom_offset=0x0.
ImageStart = 0x80030000, ImageLength = 0x28AFC, LaunchAddr = 0x80045A6C
Completed file(s):
-------------------------------------------------------------------------------
: Address=0x80030000Length=0x28AFCName="" Target=RAM
ROMHDR at Address 80030044h
BP_InitiSighForSlcMlc = 0
++FMD_Init() ****
FMD_Init() : Read ID = 0x0000ecd5
FMD_Init() : NUM_OF_BLOCKS = 4096
FMD_Init() : PAGES_PER_BLOCK = 128
FMD_Init() : SECTORS_PER_PAGE = 8
--FMD_Init()
FMD_GetInfo() : NUMBLOCKS = 4096(0x1000), SECTORSPERBLOCK = 128(0x80), BYTESPERSECTOR = 4096(0x1000)
dwImageLength = 0x28afc
dwNumBlocks = 0x1
dwBlock(0x2) X g_FlashInfo.wSectorsPerBlock(0x80) = 0x100
dwBytesPerBlock : 524288
TOC {
dwSignature: 0x434F544E
BootCfg {
ConfigFlags: 0x20830
BootDelay: 0x2
ImageIndex: 1
IP: 0.0.0.0
MAC Address: 00:00:00:00:00:00
Port: 0.0.0.0
SubnetMask: 255.255.255.0
}
ID {
dwVersion: 0x20004
dwSignature: 0x45424F54
String: 'eboot.nb0'
dwImageType: 0x2
dwTtlSectors: 0x29
dwLoadAddress: 0x80030000
dwJumpAddress: 0x80045A6C
dwStoreOffset: 0x0
sgList.dwSector: 0x100
sgList.dwLength: 0x29
}
ID {
dwVersion: 0x1
dwSignature: 0x43465348
String: ''
dwImageType: 0x2
dwTtlSectors: 0x2403
dwLoadAddress: 0x80150000
dwJumpAddress: 0x80157734
dwStoreOffset: 0x0
sgList.dwSector: 0x380
sgList.dwLength: 0x2403
}
chainInfo.dwLoadAddress: 0X00000000
chainInfo.dwFlashAddress: 0X00000000
chainInfo.dwLength: 0X00000000
}
INFO: Eboot image stored to Smart Media.Please Reboot.Halting...
Reserving Blocks ...
...reserve complete.
Enter LowLevelFormat .
Erasing flash block(s) (please wait): EraseBlocks: found a bad block (0x724) - skipping...
EraseBlocks: found a bad block (0x9c2) - skipping...
EraseBlocks: found a bad block (0xcaa) - skipping...
EraseBlocks: found a bad block (0xcac) - skipping...
EraseBlocks: found a bad block (0xcb0) - skipping...
Done.
WriteMBR: MBR block = 0x3.
Done.
BinFS format done.
IsCardInserted
FileInfo.fsize = 0x466C447
FileInfo.fsize = 0x466C447
g_pDownPt = 0xA766C447
BL_IMAGE_TYPE_BIN
Download BIN file information:
-----------------------------------------------------
: Base Address=0x80150000Length=0x4713574
-----------------------------------------------------
BIN image type unknow
!OEMVERIFYMEMORY: Invalid image
页:
[1]