OK6410 Wince 6修改调试串口问题
请教各位大大，要修改ok6410的com1做普通串口应该要怎么改？在smdk6410.bat里面发现set BSP_NOSERIAL=
set BSP_NOUART0=1
set BSP_NOUART1=
set BSP_NOUART2=
set BSP_NOUART3=
set BSP_NOIRDA2=1
set BSP_NOIRDA3=1
set BSP_NOI2C=
set BSP_NOSPI=1
set BSP_NOUSBHCD=
@REM If you want to exclude USB Function driver in BSP. Set this variable
set BSP_NOUSBFN=
@REM This select default function driver
set BSP_USBFNCLASS=SERIAL
@REM set BSP_USBFNCLASS=MASS_STORAGE
@REM DVFS is not yet implemented.
set BSP_USEDVS=1
set BSP_DEBUGPORT=SERIAL_UART0
@REM set BSP_DEBUGPORT=SERIAL_UART1
@REM set BSP_DEBUGPORT=SERIAL_UART2
@REM set BSP_DEBUGPORT=SERIAL_UART3据说还要修改debug.c，在src\oal\oallib里面发现debug.c，内容如下：//
// Copyright (c) Microsoft Corporation.All rights reserved.
//
//
// Use of this source code is subject to the terms of the Microsoft end-user
// license agreement (EULA) under which you licensed this SOFTWARE PRODUCT.
// If you did not accept the terms of the EULA, you are not authorized to use
// this source code. For a copy of the EULA, please see the LICENSE.RTF on your
// install media.
//
//------------------------------------------------------------------------------
//
//File:debug.c
//
//This module is provides the interface to the serial port.
//
#include <bsp.h>
#include <nkintr.h>
//------------------------------------------------------------------------------
// Defines
//------------------------------------------------------------------------------
// Externs
//------------------------------------------------------------------------------
// Global Variables
//------------------------------------------------------------------------------
// Local Variables
static volatile S3C6410_UART_REG *g_pUARTReg = NULL;
static volatile S3C6410_GPIO_REG *g_pGPIOReg = NULL;
static volatile S3C6410_SYSCON_REG *g_pSysConReg = NULL;
static const UINT32 aSlotTable =
{
0x0000, 0x0080, 0x0808, 0x0888,
0x2222, 0x4924, 0x4a52, 0x54aa,
0x5555, 0xd555, 0xd5d5, 0xddd5,
0xdddd, 0xdfdd, 0xdfdf, 0xffdf
};
//------------------------------------------------------------------------------
// Local Functions
//------------------------------------------------------------------------------
//
//Function: OEMInitDebugSerial
//
//Initializes the debug serial port
//
VOID OEMInitDebugSerial()
{
UINT32 logMask;
UINT32 DivSlot;
float Div;
//OALMSG(TRUE, (TEXT(" ++OEMInitDebugSerial()\n\r")));
// At this moment we must suppress logging.
//
logMask = dpCurSettings.ulZoneMask;
dpCurSettings.ulZoneMask = 0;
// Map SFR Address
//
if (g_pUARTReg == NULL)
{
#if (DEBUG_PORT == DEBUG_UART0)
// UART0
g_pUARTReg = (S3C6410_UART_REG *)OALPAtoVA(S3C6410_BASE_REG_PA_UART0, FALSE);
#elif (DEBUG_PORT == DEBUG_UART1)
// UART1
g_pUARTReg = (S3C6410_UART_REG *)OALPAtoVA(S3C6410_BASE_REG_PA_UART1, FALSE);
#elif (DEBUG_PORT == DEBUG_UART2)
// UART2
g_pUARTReg = (S3C6410_UART_REG *)OALPAtoVA(S3C6410_BASE_REG_PA_UART2, FALSE);
#elif (DEBUG_PORT == DEBUG_UART3)
// UART3
g_pUARTReg = (S3C6410_UART_REG *)OALPAtoVA(S3C6410_BASE_REG_PA_UART3, FALSE);
#else
INVALID_DEBUG_PORT // Error
#endif
}
if (g_pGPIOReg == NULL)
{
g_pGPIOReg = (S3C6410_GPIO_REG *)OALPAtoVA(S3C6410_BASE_REG_PA_GPIO, FALSE);
}
if (g_pSysConReg == NULL)
{
g_pSysConReg = (S3C6410_SYSCON_REG *)OALPAtoVA(S3C6410_BASE_REG_PA_SYSCON, FALSE);
}
// UART I/O port initialize
#if (DEBUG_PORT == DEBUG_UART0)
// UART0 Clock Enable
g_pSysConReg->PCLK_GATE |= (1<<1); // UART0
g_pSysConReg->SCLK_GATE |= (1<<5); // UART0~3
// UART0 Port Initialize (RXD0 : GPA0, TXD0: GPA1)
g_pGPIOReg->GPACON = (g_pGPIOReg->GPACON & ~(0xff<<0)) | (0x22<<0); // GPA0->RXD0, GPA1->TXD0
g_pGPIOReg->GPAPUD = (g_pGPIOReg->GPAPUD & ~(0xf<<0)) | (0x1<<0); // RXD0: Pull-down, TXD0: pull up/down disable
#elif (DEBUG_PORT == DEBUG_UART1)
// UART1 Clock Enable
g_pSysConReg->PCLK_GATE |= (1<<2); // UART1
g_pSysConReg->SCLK_GATE |= (1<<5); // UART0~3
// UART1 Port Initialize (RXD1 : GPA4, TXD1: GPA5)
g_pGPIOReg->GPACON = (g_pGPIOReg->GPACON & ~(0xff<<16)) | (0x22<<16); // GPA4->RXD1, GPA5->TXD1
g_pGPIOReg->GPAPUD = (g_pGPIOReg->GPAPUD & ~(0xf<<8)) | (0x1<<8); // RXD1: Pull-down, TXD1: pull up/down disable
#elif (DEBUG_PORT == DEBUG_UART2)
// UART2 Clock Enable
g_pSysConReg->PCLK_GATE |= (1<<3); // UART2
g_pSysConReg->SCLK_GATE |= (1<<5); // UART0~3
// UART2 Port Initialize (RXD2 : GPAB0, TXD2: GPB1)
g_pGPIOReg->GPBCON = (g_pGPIOReg->GPBCON & ~(0xff<<0)) | (0x22<<0); // GPB0->RXD2, GPB1->TXD2
g_pGPIOReg->GPBPUD = (g_pGPIOReg->GPBPUD & ~(0xf<<0)) | (0x1<<0); // RXD2: Pull-down, TXD2: pull up/down disable
#elif (DEBUG_PORT == DEBUG_UART3)
// UART3 Clock Enable
g_pSysConReg->PCLK_GATE |= (1<<4); // UART3
g_pSysConReg->SCLK_GATE |= (1<<5); // UART0~3
// UART3 Port Initialize (RXD3 : GPB2, TXD3: GPB3)
g_pGPIOReg->GPBCON = (g_pGPIOReg->GPBCON & ~(0xff<<8)) | (0x22<<8); // GPB2->RXD3, GPB3->TXD3
g_pGPIOReg->GPBPUD = (g_pGPIOReg->GPBPUD & ~(0xf<<4)) | (0x1<<4); // RXD3: Pull-down, TXD3: pull up/down disable
#endif
// Initialize UART
//
g_pUARTReg->ULCON = (0<<6)|(0<<3)|(0<<2)|(3<<0); // Normal Mode, No Parity, 1 Stop Bit, 8 Bit Data
g_pUARTReg->UCON = (0<<10)|(1<<9)|(1<<8)|(0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0); // PCLK divide, Polling Mode
g_pUARTReg->UFCON = (0<<6)|(0<<4)|(0<<2)|(0<<1)|(0<<0); // Disable FIFO
g_pUARTReg->UMCON = (0<<5)|(0<<4)|(0<<0); // Disable Auto Flow Control
Div = (float)((float)S3C6410_PCLK/(16.0*(float)DEBUG_BAUDRATE)) - 1;
DivSlot = (UINT32)((Div-(int)Div)*16);
g_pUARTReg->UBRDIV = (UINT32)Div; // Baud rate
g_pUARTReg->UDIVSLOT = aSlotTable;
//OALMSG(TRUE, (TEXT(" OEMInitDebugSerial() : UBRDIV0 = %d, DivSlot = %d, UDIVSLOT0 = 0x%08x\n\r"), (int)Div, DivSlot, aSlotTable));
// Restore the logging mask.
//
dpCurSettings.ulZoneMask = logMask;
//OALMSG(TRUE, (TEXT(" --OEMInitDebugSerial()\n\r")));
}
//------------------------------------------------------------------------------
//
//Function: OEMWriteDebugByte
//
//Transmits a character out the debug serial port.
//
VOID OEMWriteDebugByte(UINT8 ch)
{
// Wait for TX Buffer Empty
//
while (!(g_pUARTReg->UTRSTAT & 0x2));
// TX Character
//
g_pUARTReg->UTXH = ch;
}
//------------------------------------------------------------------------------
//
//Function: OEMReadDebugByte
//
//Reads a byte from the debug serial port. Does not wait for a character.
//If a character is not available function returns "OEM_DEBUG_READ_NODATA".
//
int OEMReadDebugByte()
{
int ch;
if (g_pUARTReg->UTRSTAT & 0x1) // There is received data
{
ch = (int)(g_pUARTReg->URXH);
}
else // There no data in RX Buffer;
{
ch = OEM_DEBUG_READ_NODATA;
}
return ch;
}
void OEMWriteDebugLED(UINT16 Index, DWORD Pattern)
{
if (g_pGPIOReg == NULL)
{
// It is first time. Initialize SFR and GPIO set to output
g_pGPIOReg = (S3C6410_GPIO_REG *)OALPAtoVA(S3C6410_BASE_REG_PA_GPIO, FALSE);
// g_pGPIOReg->GPNPUD &= ~(0xff<<24); // Pull Up/Down Disable
// g_pGPIOReg->GPNCON = (g_pGPIOReg->GPNCON & ~(0xff<<24)) | (0x55<<24); // GPN set to output
}
// The SMDK6410 Evaluation Platform supports 4 LEDs
// g_pGPIOReg->GPNDAT = (g_pGPIOReg->GPNDAT & ~(0xf<<12)) | ((Pattern&0xf)<<12);
}
//------------------------------------------------------------------------------就是不知道应该改哪，跪求各位大侠赐教 set BSP_NOUART0=1将这句的值去掉
set BSP_DEBUGPORT=SERIAL_UART0将这句屏蔽掉 谢谢seventeen
请问src\oal\oallib\debug.c里面还需不需要改动呢？ http://bbs.witech.com.cn/viewthread.php?tid=3159&page=1&extra=#pid24597
页:
[1]