Jlink V8调FL2440出错（CPU is not halted !）
我在使用Jlink V8调试FL2440时，setpc 0命令执行时，总是显示“CPU is not halted !”， 怎么个回事？SEGGER J-Link Commander V4.08l ('?' for help)
Compiled Sep 17 2009 09:42:18
DLL version V4.08l, compiled Sep 17 2009 09:41:55
Firmware: J-Link ARM V8 compiled Dec1 2009 11:42:48
Hardware: V8.00
S/N : 20100214
Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull
VTarget = 3.248V
Info: TotalIRLen = 4, IRPrint = 0x01
Info: CP15.0.0: 0x41129200: ARM, Architecure 4T
Info: CP15.0.1: 0x0D172172: ICache: 16kB (64*8*32), DCache: 16kB (64*8*32)
Info: Cache type: Separate, Write-back, Format A
Found 1 JTAG device, Total IRLen = 4:
#0 Id: 0x0032409D, IRLen:4, Unknown device
Found ARM with core Id 0x0032409D (ARM9)
JTAG speed: 5 kHz
J-Link>speed 12000
JTAG speed: 12000 kHz
J-Link>loadbin C:\linux\fl2440\init.bin 0
Loading binary file...
Writing bin data into target memory @ 0x00000000.
J-Link>setpc 0
CPU is not halted !
J-Link>g 问题解决了，原来是J-link软件版本的问题，使用Setup_JLinkARM_V410i.zip就好了。上面的使用的是Setup_JLink v8 ARM_V408l.zip出错。 :handshake jlink官网http://www.segger.com/
页:
[1]