系统烧写时出问题
2012年12月购的OK6410A的板子，256M内存，4GNandFlash。按照光盘中手册的方法和光盘中的文件进行烧写。在擦除NandFlash后，烧写系统出现以下的问是。求解啊。郁闷好多天了。一键烧写WinCE Welcome! This tool just for TE/OK6410+OALArgsInit()SocID:0x36410101
...............................
Download BIN file information:-----------------------------------------------------: Base Address=0x0Length=0x2000-----------------------------------------------------Stepldr imageImageStart = 0x0, ImageLength = 0x2000, LaunchAddr = 0x0 Completed file(s):-------------------------------------------------------------------------------: Address=0x0Length=0x2000Name="stepldr.nb0" Target=RAMBP_InitiSighForSlcMlc = 1 ++FMD_Init() **** FMD_Init() : Read ID = 0x0000ecd7 FMD_Init() : Unknown ID = 0x0000ecd7WARNING: OEMPlatformInit failed to initialize Boot Media.ERROR: WriteRawImageToBootMedia: device doesn't exist.ERROR: OEMLaunch: Failed to store image to Smart Media.Success!SpinForever... ++InitializeDisplay() --InitializeDisplay() 卡在这里不动了。 USB烧写Linux3.0.1
U-Boot 1.1.6 (Feb4 2012 - 18:06:11) for SMDK6410 **************************************** ** u-boot 1.1.6 ** ** Updated for OK6410TE6410 Board** ** Version (2012-02-04) ** ** OEM: Forlinx Embedded ** ** Web: http://www.witech.com.cn ** **************************************** CPU: S3C6410 @532MHz Fclk = 532MHz, Hclk = 133MHz, Pclk = 66MHz, Serial = CLKUART (SYNC Mode) Board: SMDK6410 DRAM: 256 MB Flash: 0 kB NandFlash Information: select s3c_nand_oob_mlc_64卡在这里不动了。 这下死机了 发表于 2014-3-26 23:05 static/image/common/back.gif
我遇到同样的问题，求解答，谢谢
你的问题跟楼主的一样吗？
页:
[1]