小瓶盖儿~~ 发表于 2013-3-9 16:37:04

OK6410烧写问题(SD卡)

本帖最后由 小瓶盖儿~~ 于 2013-3-9 16:39 编辑

烧写后启动白屏,烧写时DNW显示如下,不知为什么
Welcome! This tool just for TE/OK6410
+OALArgsInit()
SocID:0x36410101
Arguments area is initialized
-OALArgsInit()
INFO: (unsigned)C_IsrHandler : 0x800668C4
INFO: (unsigned)ASM_IsrHandler : 0x80069F80
INFO: (unsigned)pISR : 0xEA01A7D8
HSMMC init
Setting registers for the EPLL (for SDCLK) : SYSCon.
Setting registers for the GPIO.
Setting registers for the EPLL : HSMMCCon.

CardSize: 510132224
ClockConfig() Card Working Frequency = 24MHz
BP_Init
++FMD_Init() ****
FMD_Init() : Read ID = 0x0000ecd7
FMD_Init() : Unknown ID = 0x0000ecd7
WARNING: OEMPlatformInit failed to initialize Boot Media.
FMD_GetInfo() : NUMBLOCKS = 0(0x0), SECTORSPERBLOCK = 0(0x0), BYTESPERSECTOR = 0(0x0)
wNUM_BLOCKS : 0(0x0)
TOC_Read ERROR: no boot media
TOC_Init: dwEntry:1, dwImageType: 0x2, dwImageStart: 0x0, dwImageLength: 0x0, dwLaunchAddr: 0x0
+BootConfigInit
-BootConfigInit
TOC {
dwSignature: 0x434F544E
BootCfg {
ConfigFlags: 0x10020
BootDelay: 0x2
ImageIndex: 1
IP: 0.0.0.0
MAC Address: 00:00:00:00:00:00
Port: 0.0.0.0
SubnetMask: 255.255.255.0
}
ID {
dwVersion: 0x20004
dwSignature: 0x45424F54
String: 'eboot.nb0'
dwImageType: 0x2
dwTtlSectors: 0x400
dwLoadAddress: 0x80030000
dwJumpAddress: 0x80030000
dwStoreOffset: 0x0
sgList.dwSector: 0x40
sgList.dwLength: 0x400
}
ID {
dwVersion: 0x1
dwSignature: 0x43465348
String: ''
dwImageType: 0x2
dwTtlSectors: 0x0
dwLoadAddress: 0x0
dwJumpAddress: 0x0
dwStoreOffset: 0x0
}
chainInfo.dwLoadAddress: 0X00000000
chainInfo.dwFlashAddress: 0X00000000
chainInfo.dwLength: 0X00000000
}
++InitializeDisplay()
--InitializeDisplay()
Press to download image stored on boot media, or to enter boot monitor.

Initiating image download in 0 seconds.

Starting auto-download ...
Erasethe block '0..3'
System ready!
Preparing for download...
IsCardInserted
f_mount return = 0x0
FileInfo.fsize = 0x2000
FileInfo.fsize = 0x2000
FileInfo.fsize = 0x2000
g_pDownPt = 0xA300211B

BL_IMAGE_TYPE_MANIFEST


BL_IMAGE_TYPE_UNKNOWN


Download BIN file information:
-----------------------------------------------------
: Base Address=0x0Length=0x2000
-----------------------------------------------------
Stepldr image
ImageStart = 0x0, ImageLength = 0x2000, LaunchAddr = 0x0

Completed file(s):
-------------------------------------------------------------------------------
: Address=0x0Length=0x2000Name="stepldr.nb0" Target=RAM
BP_InitiSighForSlcMlc = 1
++FMD_Init() ****
FMD_Init() : Read ID = 0x0000ecd7
FMD_Init() : Unknown ID = 0x0000ecd7
WARNING: OEMPlatformInit failed to initialize Boot Media.
ERROR: WriteRawImageToBootMedia: device doesn't exist.
ERROR: OEMLaunch: Failed to store image to Smart Media.
Success!
SpinForever...
这个烧写一直有两个错误,不懂,用其原带镜像文件也是

飞凌-路飞 发表于 2013-3-10 09:46:31

清除坏块了吗?
页: [1]
查看完整版本: OK6410烧写问题(SD卡)