ok6410A 开发板更新了从网站下载的CE6.0 BSP后 不能正常启动（急急急）。
ok6410A 开发板更新了从网站下载的CE6.0 BSP后 重新生产工程成功，烧写成功，重起后不能正常启动。
如下为串口信息。是怎么回事？？？
我的开发板配置是 256M ram2G NAND是不是因为新的bsp是4G nand的原因啊。
Enter your selection:
WinCE 6.0 Steploader for SMDK6410
Launch Eboot...
Microsoft Windows CE Bootloader Common Library Version 1.4 Built May6 2013 15:57:48
Microsoft Windows CE Bootloader for the Samsung SMDK6410 Version 2.4 Built May6 2013
++FMD_Init() ****
FMD_Init() : Read ID = 0x0000ecd5
FMD_Init() : NUM_OF_BLOCKS = 4096
FMD_Init() : PAGES_PER_BLOCK = 128
FMD_Init() : SECTORS_PER_PAGE = 8
--FMD_Init()
FMD_GetInfo() : NUMBLOCKS = 4096(0x1000), SECTORSPERBLOCK = 128(0x80), BYTESPERSECTOR = 4096(0x1000)
FMD_GetInfo() : NUMBLOCKS = 4096(0x1000), SECTORSPERBLOCK = 128(0x80), BYTESPERSECTOR = 4096(0x1000)
Press to launch image stored on boot media, or to enter boot monitor.
Initiating image launch in 0 seconds.
Launching image from boot media ...
OEMPlatformInit: IMAGE_TYPE_RAMIMAGE
Stepldr image
Stepldr image
ReadOSImageFromBootMedia: ERROR_INVALID_ADDRESS: (address=0x0, sectors=0x0, launch address=0x0)...
OEMPlatformInit ERROR: Failed to load kernel region into RAM. 楼主你试试你以前的bsp吧
页:
[1]