USB烧写LINUX下载FORLINX_6410_touch.cramfs校验不过
USB烧写LINUX下载FORLINX_6410_touch.cramfs校验不过，DNW显示如下：U-Boot 1.1.6 (Feb 24 2011 - 14:27:19) for SMDK6410
****************************************
** u-boot 1.1.6 **
** Updated for TE6410 Board **
** Version 1.0 (10-01-15) **
** OEM: Forlinx Embedded **
** Web: http://www.witech.com.cn **
****************************************
CPU: S3C6410 @532MHz
Fclk = 532MHz, Hclk = 133MHz, Pclk = 66MHz, Serial = CLKUART (SYNC Mode)
Board: SMDK6410
DRAM: 256 MB
Flash: 0 kB
NAND: 256 MB
*** Warning - bad CRC or NAND, using default environment
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot:0
SMDK6410 # dnw 50008000
OTG cable Connected!
Now, Waiting for DNW to transmit data
Download Done!! Download Address: 0x50008000, Download Filesize:0x5a3a000
Checksum is being calculated...........................................................................................
Checksum Value => MEM:829c DNW:b35c 另外采用一键烧写的方式进不了系统：
------------------------------------------------------------------------------------------------------------------
DNW显示的信息：
VFS: Mounted root (cramfs filesystem) readonly on device 31:2.
devtmpfs: mounted
Freeing init memory: 164K
hub 1-0:1.0: connect-debounce failed, port 2 disabled
/etc/rc.d/init.d/netd: line 16: /usr/sbin/inetd: not found
mkdir: cannot create directory '/mnt/disk': File exists
yaffs: dev is 32505859 name is "mtdblock3" rw
yaffs: passed flags ""
Try to bring eth0 interface up......eth0: link down
Done
Starting Qtopia2, please waiting...
Please press Enter to activate this console. touch...
hub 1-0:1.0: connect-debounce failed, port 2 disabled Starting Qtopia2, please waiting...
Please press Enter to activate this console. touch...
这个提示，已经进入到系统内了啊～
请到6410专区发贴～
页:
[1]