使用SD卡制作启动盘时，SD Card is not correctly partitioned。。
第一步就这样了，，，请教各位大神帮忙解答一下：#major minor size name
1: 8 16 3872256 sdb
Enter Device Number: 1
sdb was selected
Checking the device is unmounted
df: ‘/mnt/hgfs’: Protocol error
df: ‘/mnt/hgfs’: Protocol error
df: ‘/mnt/hgfs’: Protocol error
sdb1sdb2 sdb3
SD Card is not correctly partitioned
################################################################################
Select 2 partitions if only need boot and rootfs (most users)
Select 3 partitions if need SDK & CCS on SD card.This is usually used
by device manufacturers with access to partition tarballs.
****WARNING**** continuing will erase all data on sdb
################################################################################
Number of partitions needed :
本帖最后由 飞凌-unix 于 2016-3-9 15:10 编辑
输入选项2接着执行试试，不行的话，您的sd卡里边是不是有分区，可以先用windows工具格式化成一个分区试试；或者您再看看您的虚拟机里边是不是缺少什么工具。 我是先用windows格式成FAT32了，空的，什么都没放，然后进去执行的create-sdcard.sh,每次都能认出为sdb1，但是提示：SD Card is not correctly partitioned。继续往 下执行的结果如下：
Availible Drives to write images to:
#major minor size name
1: 8 16 3872256 sdb
Enter Device Number: 1
sdb was selected
Checking the device is unmounted
sdb1sdb2 sdb3
SD Card is not correctly partitioned
################################################################################
Select 2 partitions if only need boot and rootfs (most users)
Select 3 partitions if need SDK & CCS on SD card.This is usually used
by device manufacturers with access to partition tarballs.
****WARNING**** continuing will erase all data on sdb
################################################################################
Number of partitions needed : 2
Now partitioning sdb with 2 partitions...
################################################################################
Now ** 2 partitions
################################################################################
记录了1024+0 的读入
记录了1024+0 的写出
1048576字节(1.0 MB)已复制，0.264477 秒，4.0 MB/秒
DISK SIZE - 3965190144 bytes
sfdisk：无效选项 -- D
Usage:
sfdisk <dev> [[-N] <part>]
sfdisk <command>
Display or manipulate a disk partition table.
Commands:
-A, --activate <dev> [<part> ...] list or set bootable MBR partitions
-d, --dump <dev> dump partition table (usable for later input)
-g, --show-geometry [<dev> ...] list geometry of all or specified devices
-l, --list [<dev> ...] list partitions of each device
-s, --show-size [<dev> ...] list sizes of all or specified devices
-T, --list-types print the recognized types (see -X)
-V, --verify test whether partitions seem correct
--part-label <dev> <part> [<str>] print or change partition label
--part-type <dev> <part> [<type>] print or change partition type
--part-uuid <dev> <part> [<uuid>] print or change partition uuid
--part-attrs <dev> <part> [<str>] print or change partition attributes
<dev> device (usually disk) path
<part> partition number
<type> partition type, GUID for GPT, hex for MBR
选项：
-a, --append append partitions to existing partition table
-b, --backup backup partition table sectors (see -O)
--bytes print SIZE in bytes rather than in human readable format
-f, --force disable all consistency checking
--color[=<when>] colorize output (auto, always or never)
colors disabled by default
-N, --partno <num> specify partition number
-n, --no-act do everything except write to device
--no-reread do not check whether the device is in use
-O, --backup-file <path>override default backup file name
-o, --output <list> output columns
-q, --quiet suppress extra info messages
-X, --label <name> specify label type (dos, gpt, ...)
-Y, --label-nested <name> specify nested label type (dos, bsd)
-L, --Linux deprecated, only for backward compatibility
-u, --unit S deprecated, only sector unit is supported
-h, --help display this help and exit
-v, --versionoutput version information and exit
Available columns (for -o):
gpt: Device Start End Sectors Size Type Type-UUID Attrs Name UUID
dos: Device Start End Sectors Cylinders Size Type Id Attrs Boot End-C/H/S
Start-C/H/S
bsd: Slice Start End Sectors Cylinders Size Type Bsize Cpg Fsize
sgi: Device Start End Sectors Cylinders Size Type Id Attrs
sun: Device Start End Sectors Cylinders Size Type Id Flags
For more details see sfdisk(8).
################################################################################
Partitioning Boot
################################################################################
mkfs.fat 3.0.28 (2015-05-16)
mkfs.fat: warning - lowercase labels might not work properly with DOS or Windows
/dev/sdb1: No such file or directory
################################################################################
Partitioning rootfs
################################################################################
mke2fs 1.42.12 (29-Aug-2014)
The file /dev/sdb2 does not exist and no size was specified.
################################################################################
Partitioning is now done
Continue to install filesystem or select 'n' to safe exit
**Warning** Continuing will erase files any files in the partitions
################################################################################
Would you like to continue? : n
mount: special device /dev/sdb1 does not exist
mount: special device /dev/sdb2 does not exist
每次都是提示 不存在。。。。
一般这种情况，会是缺少什么工具呢？ 请问楼主解决了吗？
我也碰到了这样的问题 kavieen 发表于 2016-3-11 16:06
一般这种情况，会是缺少什么工具呢？
您好：
您的问题是否解决了，查到具体是什么原因了吗 同样的问题{:2_36:}{:2_34:}
页:
[1]