你好，想请教一个6UL-C2的以太网问题！
核心板和底板一开始用你们的时候还好，很正常，然后使用了一段时间之后，期间没有烧过系统，突然出现了
Reconfiguring network inte**ces... [ 8.755725] fec 2188000.ethernet eth0: Freescale FEC PHY driver (mii_bus:phy_addr=2188000.ethernet:00, irq=-1)
[ 8.805473] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
done.
[ 8.914957] Trying to free nonexistent resource <0000000087b00000-0000000087c76fff>
Pass Calibrating...
1970-01-01 00:02:56: (log.c.166) server started
Copyright (C) 2006-2016 Forlinx Embedded Technology Co., Ltd All Rights Reservedwww.forlinx.com
freescale login: [ 10.755379] libphy: 2188000.ethernet:00 - Link is Up - 100/Full
[ 10.761361] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
然后不动的话 还会出现
freescale login: [ 33.822151] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
正常PING的时候还是能 ping的通，reboot 也正常。
后来我自己也做了个工程相关的底板，按照你们的C2底板原理图照抄的。
也出现
[ 8.805473] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
freescale login: [ 10.755379] libphy: 2188000.ethernet:00 - Link is Up - 100/Full
[ 10.761361] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
然后不动它 果断时间出现
freescale login: [ 33.822151] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
然后 登陆的话正常，
再reboot就挂了
启动不了 报错下图
我自己做的底板 每次出现 reboot不行的时候，必须要断电之后再插电重启正常！ 用的什么时候的资料？
页:
[1]