OK8MP板子从TF卡启动显示"context forlinx"
本帖最后由 qingfengjuechen 于 2022-8-10 11:20 编辑U-Boot SPL 2020.04-00001-g1aaf466989-dirty (Aug 25 2021 - 15:02:44 +0800)
using static parameter
DDRINFO: start DRAM init
DDRINFO: DRAM rate 4000MTS
DDRINFO:ddrphy calibration done
DDRINFO: ddrmix config done
Normal Boot
Trying to boot from BOOTROM
image offset 0x8000, pagesize 0x200, ivt offset 0x0
NOTICE:BL31: v2.2(release):rel_imx_5.4.70_2.3.0-0-gf1d7187f2
NOTICE:BL31: Built : 03:31:00, Apr8 2021
Forlinx
U-Boot 2020.04-00001-g1aaf466989-dirty (Aug 25 2021 - 15:02:44 +0800)
CPU: i.MX8MP rev1.1 1600 MHz (running at 1200 MHz)
CPU: Industrial temperature grade (-40C to 105C) at 33C
Reset cause: POR
Model: Forlinx OK8MPlus LPDDR4 EVK board
DRAM:4 GiB
MMC: FSL_SDHC: 1, FSL_SDHC: 2
boot dev is not emmc, using static dtb
mipi_panel enable
lvds0_panel enable
eth0 enable
eth1 enable
Loading Environment from MMC... *** Warning - bad CRC, using default environment
[*]-Video Link 0 (1024 x 600)
lcd-controller@32e80000, video
mipi_dsi@32e60000, video_bridge
mipi_panel, panel
[*]-Video Link 1 (1280 x 800)
lcd-controller@32e90000, video
ldb@32ec005c, video_bridge
lvds0_panel, panel
[ ]-Video Link 2
lcd-controller@32e90000, video
ldb@32ec005c, video_bridge
** Unrecognized filesystem type **
** Unrecognized filesystem type **
In: serial
Out: serial
Err: serial
BuildInfo:
- ATF f1d7187
- U-Boot 2020.04-00001-g1aaf466989-dirty
switch to partitions #0, OK
mmc1 is current device
normal mode
please contact forlinx
补充一下： TF卡已经是fat32格式了 qingfengjuechen 发表于 2022-8-10 11:25
补充一下： TF卡已经是fat32格式了
您好，这应该是镜像的原因，由于新的底板更换了加密芯片，需要烧写22年以后的镜像，您的镜像版本有些旧，下载一下最新的镜像重新烧写即可。
页:
[1]