Carry5959 发表于 2023-8-17 09:33:15

a40i启动报错

本帖最后由 Carry5959 于 2023-8-17 09:38 编辑

oka40i启动后报错，是什么原因？

HELLO! BOOT0 is starting!
BOOT0 commit : c04b9e99ee
board init start
set pll start
set pll end
: axpxp_init
:

pmuu_type = 6
PMU: AXP221
pmu_chip_id = 6
board init ok
enable_jtag
DRAMC IS FOUR
DRAM BOOT DRIVE INFO: V1.2
the chip id is 0x3
the chip id is 0x3
the chip id is 0x3
the chip id is 0x3
the chip id is 0x3
DRAM CLK =576 MHZ
DRAM Type =3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
DRAM zq value: 0x3b3bfb
DRAM SIZE =1024 M
DRAM ** test OK.
dram size =1024
rtc standby flag is 0x0, super standby flag is 0x0
card no is 2
sdcard 2 line count 8
: mmc driver ver 2022-08-26 15:04
: Wrong media type 0x0
: ***Try SD card 2***
: mmc 2 cmd 8 timeout, err 100
: mmc 2 cmd 8 err 100
: mmc 2 send if cond failed
: mmc 2 cmd 55 timeout, err 100
: mmc 2 cmd 55 err 100
: mmc 2 send app cmd failed
: ***Try MMC card 2***
: RMCA OK!
: mmc 2 bias 0
: MMC 5.1
: HSSDR52/SDR25 8 bit
: 50000000 Hz
: 7456 MB
: ***SD/MMC 2 init OK!!!***
Loading boot-pkg Succeed(index=0).
Entry_name      = u-boot
Entry_name      = dtb
Entry_name      = optee
tunning data addr:0x4a0003e8
Jump to second Boot.
MESSAGE: TEE-CORE: OP-TEE version: 8d296159-dirty #1 Fri 21 Oct 2022 02:40:38 AM UTC arm
ERROR:    TEE-CORE:check_hardware_info:149: data: 1 1 0 0
ERROR:    TEE-CORE:check_hardware_info:150: hardware error 3
ERROR:    TEE-CORE: Panic at core/arch/arm/plat-sun8iw11p1/main.c:261 <plat_init>
ERROR:    TEE-CORE: Call stack:
ERROR:    TEE-CORE:0x4860b7d9
ERROR:    TEE-CORE:0x4861157b
ERROR:    TEE-CORE:0x4861001f
ERROR:    TEE-CORE:0x486020e8

Carry5959 发表于 2023-8-17 09:36:05

D:\_\oka40i\0AC9D5E5-432F-4156-9BAB-037AF380AAC5.png

Carry5959 发表于 2023-8-17 09:37:18

HELLO! BOOT0 is starting!
BOOT0 commit : c04b9e99ee
board init start
set pll start
set pll end
: axpxp_init
:

pmuu_type = 6
PMU: AXP221
pmu_chip_id = 6
board init ok
enable_jtag
DRAMC IS FOUR
DRAM BOOT DRIVE INFO: V1.2
the chip id is 0x3
the chip id is 0x3
the chip id is 0x3
the chip id is 0x3
the chip id is 0x3
DRAM CLK =576 MHZ
DRAM Type =3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
DRAM zq value: 0x3b3bfb
DRAM SIZE =1024 M
DRAM ** test OK.
dram size =1024
rtc standby flag is 0x0, super standby flag is 0x0
card no is 2
sdcard 2 line count 8
: mmc driver ver 2022-08-26 15:04
: Wrong media type 0x0
: ***Try SD card 2***
: mmc 2 cmd 8 timeout, err 100
: mmc 2 cmd 8 err 100
: mmc 2 send if cond failed
: mmc 2 cmd 55 timeout, err 100
: mmc 2 cmd 55 err 100
: mmc 2 send app cmd failed
: ***Try MMC card 2***
: RMCA OK!
: mmc 2 bias 0
: MMC 5.1
: HSSDR52/SDR25 8 bit
: 50000000 Hz
: 7456 MB
: ***SD/MMC 2 init OK!!!***
Loading boot-pkg Succeed(index=0).
Entry_name      = u-boot
Entry_name      = dtb
Entry_name      = optee
tunning data addr:0x4a0003e8
Jump to second Boot.
MESSAGE: TEE-CORE: OP-TEE version: 8d296159-dirty #1 Fri 21 Oct 2022 02:40:38 AM UTC arm
ERROR:    TEE-CORE:check_hardware_info:149: data: 1 1 0 0
ERROR:    TEE-CORE:check_hardware_info:150: hardware error 3
ERROR:    TEE-CORE: Panic at core/arch/arm/plat-sun8iw11p1/main.c:261 <plat_init>
ERROR:    TEE-CORE: Call stack:
ERROR:    TEE-CORE:0x4860b7d9
ERROR:    TEE-CORE:0x4861157b
ERROR:    TEE-CORE:0x4861001f
ERROR:    TEE-CORE:0x486020e8
页: [1]
查看完整版本: a40i启动报错