版本启动到10s左右直接重启，反复如此
核心板自带软件版本为SMP Thu Oct 12 16:29:26 CST 2023 ，可以在我们自己的板卡上正常启动；而我自己编译的版本则不能正常启动；
但是该核心板放在官方提供的开发板上却是能够启动的；也就是说，在 我们自制板卡上，烧录是成功的，但是启动是失败的；换到飞凌开发底板则能够启动成功；
之前电话沟通，似乎说什么禁用某个pcie，已经记不清了，请继续支持一下
[ 0.543272] Key type asymmetric registered
[ 0.543288] Asymmetric key parser 'x509' registered
[ 0.543339] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[ 0.543357] io scheduler noop registered
[ 0.543370] io scheduler deadline registered
[ 0.543477] io scheduler cfq registered (default)
[ 0.543495] io scheduler mq-deadline registered
[ 0.543508] io scheduler kyber registered
[ 0.544487] rockchip-csi2-dphy csi2-dphy0: csi2 dphy0 probe successfully!
[ 0.544633] rockchip-csi2-dphy-hw fe870000.csi2-dphy-hw: csi2 dphy hw probe successfully!
[ 0.547071] phy phy-fe8a0000.usb2-phy.1: No vbus specified for otg port
[ 0.548175] extcon extcon1: failed to create extcon usb2-phy link
[ 0.548442] phy phy-fe8b0000.usb2-phy.3: No vbus specified for otg port
[ 0.557549] rk-pcie 3c0000000.pcie: Linked as a consumer to regulator.3
[ 0.557807] rk-pcie 3c0800000.pcie: Linked as a consumer to regulator.3
[ 0.557830] rk-pcie 3c0000000.pcie: missing legacy IRQ resource
[ 0.557861] rk-pcie 3c0000000.pcie: Missing *config* reg space
[ 0.557881] rk-pcie 3c0000000.pcie: host bridge /pcie@fe260000 ranges:
[ 0.557910] rk-pcie 3c0000000.pcie: err 0x300000000..0x3007fffff -> 0x00000000
[ 0.557932] rk-pcie 3c0000000.pcie: IO 0x300800000..0x3008fffff -> 0x00800000
[ 0.557952] rk-pcie 3c0000000.pcie: MEM 0x300900000..0x33fffffff -> 0x00900000
[ 0.558417] pwm-backlight dsi1-backlight: dsi1-backlight supply power not found, using dummy regulator
[ 0.558478] pwm-backlight dsi1-backlight: Linked as a consumer to regulator.0
[ 1.575532] rk-pcie 3c0000000.pcie: PCIe Linking... LTSSM is 0x3
[ 2.588865] rk-pcie 3c0000000.pcie: PCIe Linking... LTSSM is 0x3
[ 3.602210] rk-pcie 3c0000000.pcie: PCIe Linking... LTSSM is 0x3
[ 4.615543] rk-pcie 3c0000000.pcie: PCIe Linking... LTSSM is 0x3
[ 5.628875] rk-pcie 3c0000000.pcie: PCIe Linking... LTSSM is 0x3
[ 6.642209] rk-pcie 3c0000000.pcie: PCIe Linking... LTSSM is 0x3
[ 7.655542] rk-pcie 3c0000000.pcie: PCIe Linking... LTSSM is 0x3
[ 8.668875] rk-pcie 3c0000000.pcie: PCIe Linking... LTSSM is 0x3
[ 9.682210] rk-pcie 3c0000000.pcie: PCIe Linking... LTSSM is 0x3
[ 10.695542] rk-pcie 3c0000000.pcie: PCIe Linking... LTSSM is 0x3
[ 11.708873] rk-pcie 3c0000000.pcie: PCIe Link Fail
[ 11.708893] rk-pcie 3c0000000.pcie: failed to initialize host
DDR V1.15 ec2fae0c96 huan.he 22/11/08-20:06:42
In
ddrconfig:15
已解决
注释掉OK3568-C-linux_defconfig中CONFIG_PHY_ROCKCHIP_PCIE=y 即可正常启动
页:
[1]