<?xml version="1.0" encoding="gbk"?>
<rss version="2.0">
  <channel>
    <title>嵌入式爱好者 - 飞凌LS1012A开发板技术支持专版</title>
    <link>http://bbs.witech.com.cn/forum-104-1.html</link>
    <description>Latest 20 threads of 飞凌LS1012A开发板技术支持专版</description>
    <copyright>Copyright(C) 嵌入式爱好者</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Tue, 28 Apr 2026 13:32:00 +0000</lastBuildDate>
    <ttl>30</ttl>
    <image>
      <url>http://bbs.witech.com.cn/static/image/common/logo_88_31.gif</url>
      <title>嵌入式爱好者</title>
      <link>http://bbs.witech.com.cn/</link>
    </image>
    <item>
      <title>求助：OK1012A-C 系统编译出错解决方法</title>
      <link>http://bbs.witech.com.cn/thread-94193-1-1.html</link>
      <description><![CDATA[各位大神，有问题求助！
问题描述：
      在使用厂家给的源代码编译OK1012A-C 系统时，使用厂家给定的虚拟机环境，按照手册步骤编译源代码，成功！
      使用使用厂家给定的dockerfile创建容器，然后使用docker环境，按照手册步骤编译源代码时出错，出错信息如下： ...]]></description>
      <category>飞凌LS1012A开发板技术支持专版</category>
      <author>xiaoyur2021</author>
      <pubDate>Sun, 07 May 2023 01:24:41 +0000</pubDate>
    </item>
    <item>
      <title>ls1012a网络烧写系统</title>
      <link>http://bbs.witech.com.cn/thread-93679-1-1.html</link>
      <description><![CDATA[怎么通过网络tftp烧录系统到emmc中呢，新设计的底板没有预留usb口，怎么更新image，rootfs，以及dtb呢，想借助网口]]></description>
      <category>飞凌LS1012A开发板技术支持专版</category>
      <author>shuzyc</author>
      <pubDate>Fri, 04 Nov 2022 04:22:58 +0000</pubDate>
    </item>
    <item>
      <title>apt-get install linuxptp安装报错是什么原因啊</title>
      <link>http://bbs.witech.com.cn/thread-93627-1-1.html</link>
      <description><![CDATA[]]></description>
      <category>飞凌LS1012A开发板技术支持专版</category>
      <author>chen8bo5</author>
      <pubDate>Fri, 30 Sep 2022 01:22:01 +0000</pubDate>
    </item>
    <item>
      <title>LS1012A开发板GPIO咨询</title>
      <link>http://bbs.witech.com.cn/thread-93617-1-1.html</link>
      <description><![CDATA[你好，开发过程中需要使用SPI外设，看了SPI接口已被eMMC复用了，想着用GPIO模拟一下，
看了下板子上没有专门引出GPIO来呀？
再问一下TF卡的GPIO是3.3V还是1.8V的？
看图上TF供电是3.3V，空载量TF卡的各个GPIO电压都是1.7V左右。]]></description>
      <category>飞凌LS1012A开发板技术支持专版</category>
      <author>yilingtian</author>
      <pubDate>Tue, 27 Sep 2022 06:25:17 +0000</pubDate>
    </item>
    <item>
      <title>ls1012设置双SGMII应该怎么配置</title>
      <link>http://bbs.witech.com.cn/thread-93189-1-1.html</link>
      <description><![CDATA[我按照CPU手册在RCW中将SerDes配置成了相应的模式，设备树中也做了修改，mdio可以检测到两个网卡，但是还是只有eth0可以ping通eth1不行，希望有大神过来解惑！]]></description>
      <category>飞凌LS1012A开发板技术支持专版</category>
      <author>jonker</author>
      <pubDate>Thu, 31 Mar 2022 01:49:50 +0000</pubDate>
    </item>
    <item>
      <title>使用一路sgmii直接连接交换机芯片，Linux这边改如何配置呢？期盼大神指点</title>
      <link>http://bbs.witech.com.cn/thread-92987-1-1.html</link>
      <description><![CDATA[使用一路sgmii口连接phy芯片，已经调通，另一路直接接交换机芯片，不知道改修改哪些地方，有大神来提点一下不？]]></description>
      <category>飞凌LS1012A开发板技术支持专版</category>
      <author>jonker</author>
      <pubDate>Thu, 30 Dec 2021 03:55:29 +0000</pubDate>
    </item>
    <item>
      <title>LS1012A显示中文</title>
      <link>http://bbs.witech.com.cn/thread-92978-1-1.html</link>
      <description><![CDATA[LS1012A显示中文已解决]]></description>
      <category>飞凌LS1012A开发板技术支持专版</category>
      <author>nalanwenqing</author>
      <pubDate>Mon, 27 Dec 2021 02:20:42 +0000</pubDate>
    </item>
    <item>
      <title>OpenCV如何安装</title>
      <link>http://bbs.witech.com.cn/thread-92897-1-1.html</link>
      <description><![CDATA[最近手边有项目，需要在OK1012A-C上安装opencv，请问能否实现？]]></description>
      <category>飞凌LS1012A开发板技术支持专版</category>
      <author>nalanwenqing</author>
      <pubDate>Wed, 22 Dec 2021 02:55:49 +0000</pubDate>
    </item>
    <item>
      <title>uboot开源的源码在哪里下载?</title>
      <link>http://bbs.witech.com.cn/thread-80613-1-1.html</link>
      <description><![CDATA[我从下面链接中下载了，OK10xx-linux-fs.tar.bz2 （你上次提到20190305 是支持SD大文件读写 ）

20190305 20190320 链接： https://pan.baidu.com/s/1HbkfMv53kxvEWgfMbbL7gA 提取码： ljzx

展开后，在packages/firmware目录下列表如下， u-boot指向 OK10xx-linux- ...]]></description>
      <category>飞凌LS1012A开发板技术支持专版</category>
      <author>zhongtao1701</author>
      <pubDate>Fri, 29 Oct 2021 01:04:13 +0000</pubDate>
    </item>
    <item>
      <title>单网口下uboot停止pfe失败，导致openwrt网络收发问题</title>
      <link>http://bbs.witech.com.cn/thread-80603-1-1.html</link>
      <description><![CDATA[在RGMII单网口状态下， uboot初始化PFE失败，在引导kernel系统前，它会停止PFE，
但是在失败初始化后，它也不能正确停止PFE， 导致kernel的网络数据收发问题，

验证过程是使得，uboot引导时，保留RGMII和SGMII, 这样它初始成功，然后停止
PFE，

U-Boot 2018.03  ...]]></description>
      <category>飞凌LS1012A开发板技术支持专版</category>
      <author>zhongtao1701</author>
      <pubDate>Wed, 27 Oct 2021 07:09:43 +0000</pubDate>
    </item>
    <item>
      <title>单网口下openwrt网络无法正确收发</title>
      <link>http://bbs.witech.com.cn/thread-80592-1-1.html</link>
      <description><![CDATA[为了验证单网口ETH1(RGMII）的方案，在开发板进行试验，去掉ETH0(SGMII)的复位电阻R21，使得芯片AR8031处于复位状态，
运行出厂的默认openwrt版本，
uboot的提示信息

SCSI:  Net:   PFE class pe firmware
PFE tmu pe firmware
pfe_configure_serdes 0
Could no ...]]></description>
      <category>飞凌LS1012A开发板技术支持专版</category>
      <author>zhongtao1701</author>
      <pubDate>Thu, 21 Oct 2021 12:51:39 +0000</pubDate>
    </item>
    <item>
      <title>SDHC的时钟信号在uboot和kernel的中电平</title>
      <link>http://bbs.witech.com.cn/thread-80582-1-1.html</link>
      <description><![CDATA[在uboot中SD卡总是不太稳定，特别是读取大文件时，而在进入linux kerne后，再读相同SD卡的文件，却不存在这个问题，非常稳定，在开发板中测量发现
uboot中的SD的时钟信号电平比较低，大概1.2左右，而进入kernel后电平是1.8V左右，

uboot初始电平是3.3V，通过下面命 ...]]></description>
      <category>飞凌LS1012A开发板技术支持专版</category>
      <author>zhongtao1701</author>
      <pubDate>Tue, 19 Oct 2021 05:06:22 +0000</pubDate>
    </item>
    <item>
      <title>关于开发板I2C的上拉电阻问题</title>
      <link>http://bbs.witech.com.cn/thread-77075-1-1.html</link>
      <description><![CDATA[开发板I2C连接到RTC（RX8010）芯片，I2C总线上没有接上拉电阻，LS1012A手册上说它的I2C是open drain输出的，为什么没有上拉电阻？ 哪位能帮助解释一下，谢谢]]></description>
      <category>飞凌LS1012A开发板技术支持专版</category>
      <author>zhongtao1701</author>
      <pubDate>Wed, 29 Sep 2021 12:10:36 +0000</pubDate>
    </item>
    <item>
      <title>使用JTAG管脚作为GPIO</title>
      <link>http://bbs.witech.com.cn/thread-77066-1-1.html</link>
      <description><![CDATA[试验过程过程如下：
1） TJTAG_EN下拉，可以看到 PROC_TMS, PROC_TDI, PROC_TDO从原来的1.8V 变成低电平

2） 从uboot输出的RCW

       Reset Configuration Word (RCW):
       00000000: 0800000a 00000000 00000000 00000000
       00000010: 35080000 c000 ...]]></description>
      <category>飞凌LS1012A开发板技术支持专版</category>
      <author>zhongtao1701</author>
      <pubDate>Sun, 26 Sep 2021 14:54:23 +0000</pubDate>
    </item>
    <item>
      <title>请问参考时钟信号PROC_REFCLK_X的作用</title>
      <link>http://bbs.witech.com.cn/thread-76073-1-1.html</link>
      <description><![CDATA[请问下面参考时钟信号是用在什么地方，只是提供给SerDe模块（SGMII, SATA, PCIE）吗？ 如果使用RGMII的单网口，是否可以取消掉？
 PROC_REFCLK_P  
 PROC_REFCLK_N]]></description>
      <category>飞凌LS1012A开发板技术支持专版</category>
      <author>zhongtao1701</author>
      <pubDate>Thu, 09 Sep 2021 03:37:13 +0000</pubDate>
    </item>
    <item>
      <title>提供的镜像账号密码是多少？</title>
      <link>http://bbs.witech.com.cn/thread-75659-1-1.html</link>
      <description><![CDATA[飞凌提供的LINUX 虚拟机账号密码是多少？ 好像没有找到]]></description>
      <category>飞凌LS1012A开发板技术支持专版</category>
      <author>xyz5816231</author>
      <pubDate>Wed, 23 Jun 2021 18:11:33 +0000</pubDate>
    </item>
    <item>
      <title>OK1012A应用程序如何编译</title>
      <link>http://bbs.witech.com.cn/thread-75182-1-1.html</link>
      <description><![CDATA[OK1012A应用程序如何编译，也是用flex-builder吗？还是需要另外搭建交叉编译环境，有没有文档]]></description>
      <category>飞凌LS1012A开发板技术支持专版</category>
      <author>peng36933</author>
      <pubDate>Wed, 19 May 2021 00:07:28 +0000</pubDate>
    </item>
    <item>
      <title>OK1012A-C 怎么升级到LSDK2012上？</title>
      <link>http://bbs.witech.com.cn/thread-75147-1-1.html</link>
      <description><![CDATA[因为项目需要内核版本为5.3以上版本，OK1012A-C开发板中内核版本仍然为4.14，故有两个方式：
1.将OK1012A-C的LSDK升级到2012版本，对于的系统内核版本自然升级到5.4了，那么如果使用LSDK2012去做基础版本编译，板上特定的硬件驱动该如何修改已支持？
2.在现有LSDK1806 ...]]></description>
      <category>飞凌LS1012A开发板技术支持专版</category>
      <author>steven2016</author>
      <pubDate>Sun, 02 May 2021 17:11:13 +0000</pubDate>
    </item>
    <item>
      <title>uboot 缺少pfe_eth 文件</title>
      <link>http://bbs.witech.com.cn/thread-75083-1-1.html</link>
      <description><![CDATA[你好！
       OK10xx-linux-fs.tar.bz2 软件包中 缺少文件：
           在目录 /home/forlinx/work/OK10xx-linux-fs/flexbuild/packages/firmware/u-boot/drivers/net/pfe_eth/
         下，缺少源文件 pfe_cmd.c 
         pfe_driver.c
         pfe_eth. ...]]></description>
      <category>飞凌LS1012A开发板技术支持专版</category>
      <author>杨子玄</author>
      <pubDate>Wed, 14 Apr 2021 10:31:18 +0000</pubDate>
    </item>
    <item>
      <title>ubuntu 磁盘空间不足问题</title>
      <link>http://bbs.witech.com.cn/thread-74655-1-1.html</link>
      <description><![CDATA[你好！ 我的是OK1012A的开发环境，
     我按照文档《OK1012A-C-1GHZ-Ubuntu-用户手册-V1.3-2020.05.25.pdf》的5.5节单独编译内核及模块，编译内核及模块；
   每编译一次，windows 下磁盘空间占用大2G，window10 下的硬盘空间快不足了  
但是ubuntu 下看磁盘大 ...]]></description>
      <category>飞凌LS1012A开发板技术支持专版</category>
      <author>杨子玄</author>
      <pubDate>Wed, 10 Mar 2021 06:35:42 +0000</pubDate>
    </item>
  </channel>
</rss>