<?xml version="1.0" encoding="gbk"?>
<rss version="2.0">
  <channel>
    <title>嵌入式爱好者 - 飞凌A40i \ T3开发板技术支持专版</title>
    <link>http://bbs.witech.com.cn/forum-109-1.html</link>
    <description>Latest 20 threads of 飞凌A40i \ T3开发板技术支持专版</description>
    <copyright>Copyright(C) 嵌入式爱好者</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Tue, 21 Jul 2026 16:12:59 +0000</lastBuildDate>
    <ttl>30</ttl>
    <image>
      <url>http://bbs.witech.com.cn/static/image/common/logo_88_31.gif</url>
      <title>嵌入式爱好者</title>
      <link>http://bbs.witech.com.cn/</link>
    </image>
    <item>
      <title>A40i，Qt程序烧写</title>
      <link>http://bbs.witech.com.cn/thread-128270-1-1.html</link>
      <description><![CDATA[我现在想用一个Qt程序用OTG烧写到板子里面跑，不知道具体该如何写]]></description>
      <category>飞凌A40i \\ T3开发板技术支持专版</category>
      <author>初学嵌入式</author>
      <pubDate>Tue, 26 May 2026 07:47:43 +0000</pubDate>
    </item>
    <item>
      <title>关于系统烧录报错</title>
      <link>http://bbs.witech.com.cn/thread-128217-1-1.html</link>
      <description><![CDATA[这是按照操作手册进行系统烧录过程中的串口输出，镜像是官方提供的案例，操作也是完全按照手册上来的，但烧录进度一直为零，不停弹出警告“WARNINGlease contact Forlinx 
”，这种情况该如何解决？]]></description>
      <category>飞凌A40i \\ T3开发板技术支持专版</category>
      <author>darkoor</author>
      <pubDate>Wed, 01 Apr 2026 07:04:18 +0000</pubDate>
    </item>
    <item>
      <title>求教OKA40i_c的软件环境配置指导</title>
      <link>http://bbs.witech.com.cn/thread-128206-1-1.html</link>
      <description><![CDATA[想请教各位一些关于软件环境配置的问题，本人初次接触此类项目，手上有给的OKA40i_c开发板，根据手册我已下载了开发环境虚拟机，除此之外还需要下什么东西，不是很清楚，我看其他网上说下个SDK，但我没找到在哪下载，想请问这类开发板该如何配置软件操作]]></description>
      <category>飞凌A40i \\ T3开发板技术支持专版</category>
      <author>darkoor</author>
      <pubDate>Tue, 17 Mar 2026 07:29:29 +0000</pubDate>
    </item>
    <item>
      <title>求助,OK1131i-s开发板如何适配mipi 屏幕?</title>
      <link>http://bbs.witech.com.cn/thread-128180-1-1.html</link>
      <description><![CDATA[我按https://forlinx-book.yuque.com/pxh4d1/gfqde1/ia3hh7ecgabw8sph 说明把display_menu.c 改了:
{
    unsigned int phandle0 = 0;
    unsigned int phandle1 = 0;
    int offset_node = 0;
    unsigned long buffer = env_get_ulong(\&quot;board\&quot;, 10, 0);

   ...]]></description>
      <category>飞凌A40i \\ T3开发板技术支持专版</category>
      <author>蒙工</author>
      <pubDate>Tue, 13 Jan 2026 08:33:04 +0000</pubDate>
    </item>
    <item>
      <title>烧录Android 系统问题</title>
      <link>http://bbs.witech.com.cn/thread-98793-1-1.html</link>
      <description><![CDATA[请教一下烧录了ok40i1024×600后有点卡，再就是输入法没有中文，什么原因啊]]></description>
      <category>飞凌A40i \\ T3开发板技术支持专版</category>
      <author>zlz123</author>
      <pubDate>Fri, 17 Oct 2025 03:50:22 +0000</pubDate>
    </item>
    <item>
      <title>A40i核心板 在Linux环境下EC20模块拨号之后无法自动设置网关</title>
      <link>http://bbs.witech.com.cn/thread-98641-1-1.html</link>
      <description><![CDATA[A40i核心板 在Linux环境下EC20模块拨号之后无法自动设置网关
1.运行quectel-CM &amp;日志如下**Q0NDk5CQz/0PJ+m2hR0dHJycnh4aGdvsux/YZAUaAEWAEGAFGgBFgBBgBRqCeJv/NZkv/NZvMa+MIWJxa+wSnc4X/4qWOnmm1WpOTk5YFcuqwIjA5OdlqtfhGywgwAowAI8AIMAKMACPACDACu45Amvy3pm7rv6lWlOr ...]]></description>
      <category>飞凌A40i \\ T3开发板技术支持专版</category>
      <author>lixibat</author>
      <pubDate>Sat, 13 Sep 2025 05:58:39 +0000</pubDate>
    </item>
    <item>
      <title>A40i资料如何获得授权？</title>
      <link>http://bbs.witech.com.cn/thread-98580-1-1.html</link>
      <description><![CDATA[A40i资料如何获得授权？]]></description>
      <category>飞凌A40i \\ T3开发板技术支持专版</category>
      <author>Convict</author>
      <pubDate>Mon, 30 Jun 2025 07:25:00 +0000</pubDate>
    </item>
    <item>
      <title>申请OK527X-C 出厂源码的.lim烧录文件，恢复出厂设置。</title>
      <link>http://bbs.witech.com.cn/thread-98579-1-1.html</link>
      <description><![CDATA[申请OK527X-C 出厂源码的.lim烧录文件，恢复出厂设置。

串口烧录后报错，如图：




需要HDMI烧录文件，]]></description>
      <category>飞凌A40i \\ T3开发板技术支持专版</category>
      <author>丙丁先生</author>
      <pubDate>Sun, 29 Jun 2025 10:54:00 +0000</pubDate>
    </item>
    <item>
      <title>驱动问题，已解决</title>
      <link>http://bbs.witech.com.cn/thread-98578-1-1.html</link>
      <description><![CDATA[]]></description>
      <category>飞凌A40i \\ T3开发板技术支持专版</category>
      <author>丙丁先生</author>
      <pubDate>Sun, 29 Jun 2025 10:24:07 +0000</pubDate>
    </item>
    <item>
      <title>能听到开发板识别，但是屏幕不识别，原因？</title>
      <link>http://bbs.witech.com.cn/thread-98577-1-1.html</link>
      <description><![CDATA[]]></description>
      <category>飞凌A40i \\ T3开发板技术支持专版</category>
      <author>丙丁先生</author>
      <pubDate>Sun, 29 Jun 2025 09:02:13 +0000</pubDate>
    </item>
    <item>
      <title>ok527x-c putty p6 com11 端口22</title>
      <link>http://bbs.witech.com.cn/thread-98576-1-1.html</link>
      <description><![CDATA[]]></description>
      <category>飞凌A40i \\ T3开发板技术支持专版</category>
      <author>丙丁先生</author>
      <pubDate>Sat, 28 Jun 2025 11:58:58 +0000</pubDate>
    </item>
    <item>
      <title>HDMI显示超频</title>
      <link>http://bbs.witech.com.cn/thread-98575-1-1.html</link>
      <description><![CDATA[HDMI公头-HDMI公头
HDMI母头-VGA公头 转接头
VGA母头电脑屏]]></description>
      <category>飞凌A40i \\ T3开发板技术支持专版</category>
      <author>丙丁先生</author>
      <pubDate>Fri, 27 Jun 2025 05:08:06 +0000</pubDate>
    </item>
    <item>
      <title>ok527x-c串口实测</title>
      <link>http://bbs.witech.com.cn/thread-98573-1-1.html</link>
      <description><![CDATA[]]></description>
      <category>飞凌A40i \\ T3开发板技术支持专版</category>
      <author>丙丁先生</author>
      <pubDate>Thu, 26 Jun 2025 03:41:13 +0000</pubDate>
    </item>
    <item>
      <title>OK527x-C,VMware，找不到OpenWrt</title>
      <link>http://bbs.witech.com.cn/thread-98572-1-1.html</link>
      <description><![CDATA[OK527x-C,VMware，找不到OpenWrt



可是，]]></description>
      <category>飞凌A40i \\ T3开发板技术支持专版</category>
      <author>丙丁先生</author>
      <pubDate>Tue, 24 Jun 2025 12:30:23 +0000</pubDate>
    </item>
    <item>
      <title>A40i ETH0问题</title>
      <link>http://bbs.witech.com.cn/thread-98559-1-1.html</link>
      <description><![CDATA[开发板上 
能开到ETH0信息，但是 UP不上。提示 No such device。
大佬们有碰到类似问题的嘛？]]></description>
      <category>飞凌A40i \\ T3开发板技术支持专版</category>
      <author>zhumyx</author>
      <pubDate>Thu, 12 Jun 2025 02:08:38 +0000</pubDate>
    </item>
    <item>
      <title>buildroot出错</title>
      <link>http://bbs.witech.com.cn/thread-98457-1-1.html</link>
      <description><![CDATA[使用113i的sdk，单独编译buildroot出错
forlinx@ubuntu:~/work/OK113i-linux-sdk/buildroot/buildroot-201902$ ./build.sh
Prepare br toolchain gcc-linaro-5.3.1-2016.05-x86_64_arm-linux-gnueabi.tar.xz...
make: Entering directory \'/home/forlinx/work/OK113i ...]]></description>
      <category>飞凌A40i \\ T3开发板技术支持专版</category>
      <author>jka_for</author>
      <pubDate>Fri, 09 May 2025 00:59:06 +0000</pubDate>
    </item>
    <item>
      <title>请教USB0外扩网卡无法识别问题 使用A40i-C v1.2核心板</title>
      <link>http://bbs.witech.com.cn/thread-98310-1-1.html</link>
      <description><![CDATA[使用版本为 OKA40i-C、OKT3-C_Linux3.10+Qt5.9 &amp; Forlinx Desktop16.04
fex文件配置如下：
asix驱动正常注册]]></description>
      <category>飞凌A40i \\ T3开发板技术支持专版</category>
      <author>qingyan</author>
      <pubDate>Wed, 16 Apr 2025 02:36:33 +0000</pubDate>
    </item>
    <item>
      <title>USB和SD卡都烧不了镜像了</title>
      <link>http://bbs.witech.com.cn/thread-98304-1-1.html</link>
      <description><![CDATA[由于某些特殊的原因，在设备树里disabled了USB和SD卡，并且好像emmc设备树也被修改错了。
现在核心板上是可以启动uboot，linux内核启动后emmc报错然后无法进入根文件系统。
现在想要重新烧录正常的镜像，但是发现电脑一直提示USB无法获取描述符，SD卡插进去启动也无法 ...]]></description>
      <category>飞凌A40i \\ T3开发板技术支持专版</category>
      <author>mrzhangruilin</author>
      <pubDate>Sat, 05 Apr 2025 07:52:34 +0000</pubDate>
    </item>
    <item>
      <title>飞凌A40i双网口挂同一个mdio失败</title>
      <link>http://bbs.witech.com.cn/thread-98288-1-1.html</link>
      <description><![CDATA[我需要画一个双网口的板子，飞凌给的参考设计是GMAC和EMAC挂到了两路不同的MDIO总线上，但是我想节省出MDIO1总线，便将EMAC也挂在到了MDIO0上。
修改完设备树以后，GMAC能够正常ping通，EMAC无法正常ping通其它电脑，dmesg查看内核信息没有特别的报错，能识别网线插拔 ...]]></description>
      <category>飞凌A40i \\ T3开发板技术支持专版</category>
      <author>mrzhangruilin</author>
      <pubDate>Mon, 10 Mar 2025 05:52:46 +0000</pubDate>
    </item>
    <item>
      <title>OKT3 HDMI显示ubuntu桌面的问题</title>
      <link>http://bbs.witech.com.cn/thread-98260-1-1.html</link>
      <description><![CDATA[我这OJKT3 烧录了sun8iw11p1_linux_OKT3_C_uart0-1024x600.img 和 sun8iw11p1_ubuntu_OKT3_C_uart0-1024x600.img镜像后，HDMI接戴尔显示器，都无法输出ubuntu系统桌面是怎么弄？
我现在需要hdmi接口接电脑显示器能看到ubuntu的桌面。]]></description>
      <category>飞凌A40i \\ T3开发板技术支持专版</category>
      <author>港式茶餐厅</author>
      <pubDate>Wed, 22 Jan 2025 03:28:26 +0000</pubDate>
    </item>
  </channel>
</rss>