<?xml version="1.0" encoding="gbk"?>
<rss version="2.0">
  <channel>
    <title>嵌入式爱好者 - 飞凌LS1028A开发板技术支持专版</title>
    <link>http://bbs.witech.com.cn/forum-121-1.html</link>
    <description>Latest 20 threads of 飞凌LS1028A开发板技术支持专版</description>
    <copyright>Copyright(C) 嵌入式爱好者</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Sun, 16 Aug 2026 17:40:59 +0000</lastBuildDate>
    <ttl>30</ttl>
    <image>
      <url>http://bbs.witech.com.cn/static/image/common/logo_88_31.gif</url>
      <title>嵌入式爱好者</title>
      <link>http://bbs.witech.com.cn/</link>
    </image>
    <item>
      <title>在1028上DPDK怎么使用</title>
      <link>http://bbs.witech.com.cn/thread-128267-1-1.html</link>
      <description><![CDATA[/opt/dpdk-arm64/bin/dpdk-l2fwd -l 0-1 -n 2 -a 0000:00:00.0 -- -p 0x1-p 0x1是指使用eno0 报错,log如下:

EAL: Detected CPU lcores: 2
EAL: Detected NUMA nodes: 1
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_soc ...]]></description>
      <category>飞凌LS1028A开发板技术支持专版</category>
      <author>yangyanfang</author>
      <pubDate>Fri, 22 May 2026 07:04:42 +0000</pubDate>
    </item>
    <item>
      <title>ls1028 ubuntu开发</title>
      <link>http://bbs.witech.com.cn/thread-98857-1-1.html</link>
      <description><![CDATA[ls1028板卡是否能够实现板卡的数据通过rj45接口使用udp发送到pc端并通过pc端网络调试助手打印出来，以及1028板卡能够在ubuntu系统下进行相关开发。如果有相关资料能够提供一下吗？谢谢]]></description>
      <category>飞凌LS1028A开发板技术支持专版</category>
      <author>蔡徐坤</author>
      <pubDate>Tue, 04 Nov 2025 14:07:02 +0000</pubDate>
    </item>
    <item>
      <title>【Openwrt】ls1028 移植</title>
      <link>http://bbs.witech.com.cn/thread-98463-1-1.html</link>
      <description><![CDATA[我们现在用LS1028-C的开发板，默认出厂的时候，是ubuntu的版本，我现在用openwrt官网的24.10.1版本编译1028的fimware。
目前我在ubuntu版本下，通过SD卡去加载kernel和rootfs可以正常启动。 但是我想整个都用openwrt的时候，不管是通过emmc还是sd卡启动，都没有任何打 ...]]></description>
      <category>飞凌LS1028A开发板技术支持专版</category>
      <author>Hades）Jay</author>
      <pubDate>Tue, 13 May 2025 11:04:55 +0000</pubDate>
    </item>
    <item>
      <title>TF卡启动 TFA失败</title>
      <link>http://bbs.witech.com.cn/thread-98277-1-1.html</link>
      <description><![CDATA[自己研制的1028A开发板，TF卡烧录时候TFA报错：有时是BL2阶段加载BL32（ image_id: 4 ）报错，有时是BL2阶段加载BL33（ image_id: 5）报错。具体错误如下，请问该怎么解决此问题INFO:    RCW BOOT SRC is SDINFO:    SoC workaround for DDR Errata A009803 was applied ...]]></description>
      <category>飞凌LS1028A开发板技术支持专版</category>
      <author>springcute</author>
      <pubDate>Mon, 03 Mar 2025 09:47:11 +0000</pubDate>
    </item>
    <item>
      <title>TSN QBV测试问题-V2.0</title>
      <link>http://bbs.witech.com.cn/thread-98043-1-1.html</link>
      <description><![CDATA[在LS1028A上实验TSN-QBV的过程中出现了一些问题，详细参见附件的PDF描述，请各位专家指导。]]></description>
      <category>飞凌LS1028A开发板技术支持专版</category>
      <author>hzy</author>
      <pubDate>Fri, 20 Sep 2024 08:10:28 +0000</pubDate>
    </item>
    <item>
      <title>firmware部分能单独烧写吗？</title>
      <link>http://bbs.witech.com.cn/thread-96975-1-1.html</link>
      <description><![CDATA[编译生成的 firmware_ls1028ardb_uboot_emmcboot.img 文件能单独烧写吗？
不烧写整个系统。]]></description>
      <category>飞凌LS1028A开发板技术支持专版</category>
      <author>zllfdd</author>
      <pubDate>Wed, 24 Apr 2024 06:11:54 +0000</pubDate>
    </item>
    <item>
      <title>TSN测试时间同步时，ptp4l包没有</title>
      <link>http://bbs.witech.com.cn/thread-96928-1-1.html</link>
      <description><![CDATA[ptp4l没安装]]></description>
      <category>飞凌LS1028A开发板技术支持专版</category>
      <author>yyp</author>
      <pubDate>Mon, 22 Apr 2024 05:24:17 +0000</pubDate>
    </item>
    <item>
      <title>TF卡启动以及内核裁剪问题</title>
      <link>http://bbs.witech.com.cn/thread-96239-1-1.html</link>
      <description><![CDATA[1.我使用的ok1208-c的开发板，我想通过TF卡启动开发板，我按照手册的教程，先在ubuntu中完成了对TF卡的制作，然后插到板子里面完成了TF卡的烧写。  问题来了：手册上面直接把TF卡拔出，拨至eMMc启动。那我想要TF卡启动，该怎么做呢？ 因为你们提供的内存，总共6g系统就 ...]]></description>
      <category>飞凌LS1028A开发板技术支持专版</category>
      <author>的撒旦撒旦撒</author>
      <pubDate>Fri, 05 Apr 2024 07:12:13 +0000</pubDate>
    </item>
    <item>
      <title>TF卡启动</title>
      <link>http://bbs.witech.com.cn/thread-96238-1-1.html</link>
      <description><![CDATA[1.我使用的ok1208-c的开发板，我想通过TF卡启动开发板，我按照手册的教程，先在ubuntu中完成了对TF卡的制作，然后插到板子里面完成了TF卡的烧写。  问题来了：手册上面直接把TF卡拔出，拨至eMMc启动。那我想要TF卡启动，该怎么做呢？ 因为你们提供的内存，总共6g系统就 ...]]></description>
      <category>飞凌LS1028A开发板技术支持专版</category>
      <author>的撒旦撒旦撒</author>
      <pubDate>Fri, 05 Apr 2024 07:10:45 +0000</pubDate>
    </item>
    <item>
      <title>脉冲</title>
      <link>http://bbs.witech.com.cn/thread-96203-1-1.html</link>
      <description><![CDATA[ok1028如何接收脉冲信号呀]]></description>
      <category>飞凌LS1028A开发板技术支持专版</category>
      <author>Lizhifu</author>
      <pubDate>Thu, 04 Apr 2024 05:22:29 +0000</pubDate>
    </item>
    <item>
      <title>硬件</title>
      <link>http://bbs.witech.com.cn/thread-96031-1-1.html</link>
      <description><![CDATA[如何输出1pps信号呢，可以通入gps信号吗]]></description>
      <category>飞凌LS1028A开发板技术支持专版</category>
      <author>Lizhifu</author>
      <pubDate>Mon, 01 Apr 2024 06:45:28 +0000</pubDate>
    </item>
    <item>
      <title>RM500U</title>
      <link>http://bbs.witech.com.cn/thread-95337-1-1.html</link>
      <description><![CDATA[OK1028背面插入了RM500U，插入5G卡，也将quectelCM文件替换了，运行 rm500q.sh &amp;后输出结果和资料里面的不同
可以访问外网，但这个shell文件停不下来了，一直输出，除非断电]]></description>
      <category>飞凌LS1028A开发板技术支持专版</category>
      <author>Lizhifu</author>
      <pubDate>Tue, 26 Mar 2024 13:17:20 +0000</pubDate>
    </item>
    <item>
      <title>定制BL2</title>
      <link>http://bbs.witech.com.cn/thread-94972-1-1.html</link>
      <description><![CDATA[自己手上的板子ddr接的和开发板不一样（主要是ecc和位宽），需要进行配置，然后看资料说ddr初始化是BL2控制的，飞凌官方的开发环境中BL2似乎是直接编译好的二进制文件放在prebuild目录中。
想咨询一下，我的理解是否正确，如何才能获取到ATF的源码进行BL2的配置编译以 ...]]></description>
      <category>飞凌LS1028A开发板技术支持专版</category>
      <author>cxtian</author>
      <pubDate>Fri, 24 Nov 2023 07:33:38 +0000</pubDate>
    </item>
    <item>
      <title>连接codewarrior TAP调试器</title>
      <link>http://bbs.witech.com.cn/thread-94960-1-1.html</link>
      <description><![CDATA[板子连接codewarrior TAP调试器，在codewarrior软件中点击debug出现错误
请问在debug的时候，板子硬件上是否需要将拨码快关设置到指定的某个状态以及软件里面是否需要设置仿真器烧写代码的地址之类的东西。
或者其他任何可能导致此问题的原因。]]></description>
      <category>飞凌LS1028A开发板技术支持专版</category>
      <author>cxtian</author>
      <pubDate>Tue, 14 Nov 2023 05:56:51 +0000</pubDate>
    </item>
    <item>
      <title>LS1028A+千兆YT8614H通讯问题</title>
      <link>http://bbs.witech.com.cn/thread-94938-1-1.html</link>
      <description><![CDATA[YT8614H在一上电后能正常工作，ping命令操作正常，但是过一会后就会出现Destination Host Unreachable！64 bytes from 192.168.1.9: icmp_seq=263 ttl=64 time=0.708 ms
64 bytes from 192.168.1.9: icmp_seq=264 ttl=64 time=0.564 ms
64 bytes from 192.168.1.9: ic ...]]></description>
      <category>飞凌LS1028A开发板技术支持专版</category>
      <author>lpcarm</author>
      <pubDate>Sun, 05 Nov 2023 04:29:51 +0000</pubDate>
    </item>
    <item>
      <title>LS1028A网络问题-YT8614+YT8521</title>
      <link>http://bbs.witech.com.cn/thread-94930-1-1.html</link>
      <description><![CDATA[按照V2.3的底板单独做的底板，现在系统可以正常启动，但是网络设备找不到，不知道什么原因。麻烦大侠给看看！
1、执行ifconfig后，只显示eno2和lo
eno2: flags=4163  mtu 1532
        inet6 fe80::744b:a4ff:fe8d:3032  prefixlen 64  scopeid 0x20
        ether  ...]]></description>
      <category>飞凌LS1028A开发板技术支持专版</category>
      <author>lpcarm</author>
      <pubDate>Mon, 30 Oct 2023 03:51:19 +0000</pubDate>
    </item>
    <item>
      <title>1028A底板启动报错</title>
      <link>http://bbs.witech.com.cn/thread-94929-1-1.html</link>
      <description><![CDATA[按照开发板自己做的1028A的底板，启动后报错Sep 06 11:18:06 forlinx systemd[1]: Starting Load Kernel Modules...
Sep 06 11:18:06 forlinx systemd-modules-load[278]: Failed to lookup alias \'galcore\': Function not imple
Sep 06 11:18:06 forlinx systemd-mod ...]]></description>
      <category>飞凌LS1028A开发板技术支持专版</category>
      <author>lpcarm</author>
      <pubDate>Mon, 30 Oct 2023 02:30:16 +0000</pubDate>
    </item>
    <item>
      <title>RM500U模组ping失败</title>
      <link>http://bbs.witech.com.cn/thread-94899-1-1.html</link>
      <description><![CDATA[按照用户使用手册里的操作流程：模块成功识别、拨号成功、查看网卡信息也有，但是ping失败了。sim卡方向检查过了，也更换过sim卡测试，也不行。
之前有一次是成功的，可以ping成功。但是后来就一直没成功过。
可能是什么原因？]]></description>
      <category>飞凌LS1028A开发板技术支持专版</category>
      <author>fffsr</author>
      <pubDate>Sat, 30 Sep 2023 10:55:32 +0000</pubDate>
    </item>
    <item>
      <title>1028的核心板插到自己做的底板上无法启动</title>
      <link>http://bbs.witech.com.cn/thread-94898-1-1.html</link>
      <description><![CDATA[你好：
       我自己做了1028的底板，核心板用的你们的FET1028A-C，上电后，核心板的红灯常亮，绿灯也常亮，请问是什么原因？]]></description>
      <category>飞凌LS1028A开发板技术支持专版</category>
      <author>lpcarm</author>
      <pubDate>Sat, 30 Sep 2023 07:44:10 +0000</pubDate>
    </item>
    <item>
      <title>prebuild目录</title>
      <link>http://bbs.witech.com.cn/thread-94881-1-1.html</link>
      <description><![CDATA[prebuild目录是干啥用的]]></description>
      <category>飞凌LS1028A开发板技术支持专版</category>
      <author>cxtian</author>
      <pubDate>Thu, 21 Sep 2023 06:35:59 +0000</pubDate>
    </item>
  </channel>
</rss>