<?xml version="1.0" encoding="gbk"?>
<rss version="2.0">
  <channel>
    <title>嵌入式爱好者 - 飞凌LS1043A \ LS1046A开发板技术支持专版</title>
    <link>http://bbs.witech.com.cn/forum-108-1.html</link>
    <description>Latest 20 threads of 飞凌LS1043A \ LS1046A开发板技术支持专版</description>
    <copyright>Copyright(C) 嵌入式爱好者</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Wed, 13 May 2026 09:54:05 +0000</lastBuildDate>
    <ttl>30</ttl>
    <image>
      <url>http://bbs.witech.com.cn/static/image/common/logo_88_31.gif</url>
      <title>嵌入式爱好者</title>
      <link>http://bbs.witech.com.cn/</link>
    </image>
    <item>
      <title>OK1046A-C2开发板可以把系统安装到TF卡上并启动吗？</title>
      <link>http://bbs.witech.com.cn/thread-98676-1-1.html</link>
      <description><![CDATA[对于OK1046A-C2开发板，想把ubuntu系统部署到TF卡上，可正常启动，如何操作？]]></description>
      <category>飞凌LS1043A \\ LS1046A开发板技术支持专版</category>
      <author>飞翔的鱼</author>
      <pubDate>Mon, 22 Sep 2025 05:03:11 +0000</pubDate>
    </item>
    <item>
      <title>LS1046A关于配置硬件时间戳的问题</title>
      <link>http://bbs.witech.com.cn/thread-98458-1-1.html</link>
      <description><![CDATA[请问LS1046A开发板支持硬件时间戳吗？在内核和设备树中配置了DPAA和PTP相关驱动，但网络接口还是不能支持硬件时间戳该如何解决呢]]></description>
      <category>飞凌LS1043A \\ LS1046A开发板技术支持专版</category>
      <author>Wuzzz</author>
      <pubDate>Fri, 09 May 2025 01:27:57 +0000</pubDate>
    </item>
    <item>
      <title>没有SD卡的uboot烧写问题</title>
      <link>http://bbs.witech.com.cn/thread-98237-1-1.html</link>
      <description><![CDATA[请问版主，我底板没有使用sd卡，有QSPI FLASH和EMMC，QSPI FLASH里的文件损坏，如何重新烧写？]]></description>
      <category>飞凌LS1043A \\ LS1046A开发板技术支持专版</category>
      <author>小虾米哈哈哈</author>
      <pubDate>Sat, 21 Dec 2024 08:18:34 +0000</pubDate>
    </item>
    <item>
      <title>LS1046 怎么切换PIN模式？</title>
      <link>http://bbs.witech.com.cn/thread-97866-1-1.html</link>
      <description><![CDATA[目前我的RCW配置如下：
U-Boot 2018.03 (Aug 10 2022 - 15:14:50 +0800)

SoC:  LS1046AE Rev1.0 (0x87070010)
Clock Configuration:
       CPU0(A72):1800 MHz  CPU1(A72):1800 MHz  CPU2(A72):1800 MHz  
       CPU3(A72):1800 MHz  
       Bus:      700   ...]]></description>
      <category>飞凌LS1043A \\ LS1046A开发板技术支持专版</category>
      <author>Hades）Jay</author>
      <pubDate>Thu, 22 Aug 2024 01:01:15 +0000</pubDate>
    </item>
    <item>
      <title>LS1046 网口属性修改导致数据不通</title>
      <link>http://bbs.witech.com.cn/thread-97698-1-1.html</link>
      <description><![CDATA[默认，我们在LS1046A上把5个网口全部调试通了。

然后尝试修改网口属性 把link模式修改从auto变成1000M或者100M。目前PHY是使用的裕泰8521.

直接通过MDIO修改PHY的寄存器。

把寄存器0x0，分别修改为0x140(强制1000M)，0x2100（强制100M）

但是发现修改为0x14 ...]]></description>
      <category>飞凌LS1043A \\ LS1046A开发板技术支持专版</category>
      <author>Hades）Jay</author>
      <pubDate>Fri, 09 Aug 2024 00:50:09 +0000</pubDate>
    </item>
    <item>
      <title>LS1046A 外置PHY的管理接口电平问题</title>
      <link>http://bbs.witech.com.cn/thread-97649-1-1.html</link>
      <description><![CDATA[我手上的板子的V1.1的底板，我对比了下V1.1和V2.1底板的PHY管理接口，发现V1.1版本（phy使用AR8031）是1.8V连接至核心板，而V2.1底板(phy使用yt8521)则是3.3V连接至底板。
请问下 1）对应的核心板对应V1.1和V2.1是有更新吗
           2）我在LS1046的规格书上以太网 ...]]></description>
      <category>飞凌LS1043A \\ LS1046A开发板技术支持专版</category>
      <author>sj0121</author>
      <pubDate>Tue, 23 Jul 2024 09:08:52 +0000</pubDate>
    </item>
    <item>
      <title>ls1046ardb怎么在uboot下启动SGMII网口</title>
      <link>http://bbs.witech.com.cn/thread-97648-1-1.html</link>
      <description><![CDATA[目前默认情况下，我测试了2个RGMII口在uboot下是可以通信的，但是其它3个SGMII口只有2个可以通信（FM1@DTSEC6 FM1@DTSEC5）P27位置上面的口不通，靠底板的口能通，如何把5个口全部调通？

唯一一个P27上面位置的不通，需要怎么配置才能通信]]></description>
      <category>飞凌LS1043A \\ LS1046A开发板技术支持专版</category>
      <author>Hades）Jay</author>
      <pubDate>Tue, 23 Jul 2024 09:05:05 +0000</pubDate>
    </item>
    <item>
      <title>LS1046中GPIO复用问题</title>
      <link>http://bbs.witech.com.cn/thread-97609-1-1.html</link>
      <description><![CDATA[LS1046的dts关于uart的配置如下：
]]></description>
      <category>飞凌LS1043A \\ LS1046A开发板技术支持专版</category>
      <author>Hades）Jay</author>
<enclosure url="http://bbs.witech.com.cn/data/attachment/forum/serial@21c0500 {
" length="" type="image/jpeg" />      <pubDate>Wed, 17 Jul 2024 03:34:08 +0000</pubDate>
    </item>
    <item>
      <title>LS1046A 5个网口有一个不通</title>
      <link>http://bbs.witech.com.cn/thread-97604-1-1.html</link>
      <description><![CDATA[设备：LS1046A开发板

P27下的那个口能通，但是上面的那个通不了。
我使用的是fm1-mac5
fm1-mac5: flags=4099  mtu 1500
        inet 192.168.13.1  netmask 255.255.255.0  broadcast 192.168.13.255
        ether a2:07:bf:98:64:99  txqueuelen 1000  (Ether ...]]></description>
      <category>飞凌LS1043A \\ LS1046A开发板技术支持专版</category>
      <author>Hades）Jay</author>
      <pubDate>Thu, 11 Jul 2024 00:50:04 +0000</pubDate>
    </item>
    <item>
      <title>LS1046A的DPDK套件开发</title>
      <link>http://bbs.witech.com.cn/thread-97399-1-1.html</link>
      <description><![CDATA[想问下 LS1046A的嵌入式开发板，应该安装哪个版本的DPDK套件比较合适，谢谢！]]></description>
      <category>飞凌LS1043A \\ LS1046A开发板技术支持专版</category>
      <author>刘杨阳</author>
      <pubDate>Thu, 30 May 2024 06:31:09 +0000</pubDate>
    </item>
    <item>
      <title>想咨询下arm扣板，如果要支持多分区启动的话，有什么推荐的方案？</title>
      <link>http://bbs.witech.com.cn/thread-97395-1-1.html</link>
      <description><![CDATA[想咨询下arm扣板，如果要支持多分区启动的话，有什么推荐的方案？]]></description>
      <category>飞凌LS1043A \\ LS1046A开发板技术支持专版</category>
      <author>nandykong</author>
      <pubDate>Tue, 28 May 2024 10:00:31 +0000</pubDate>
    </item>
    <item>
      <title>使用Flexbuild在docker下进行编译的问题</title>
      <link>http://bbs.witech.com.cn/thread-94911-1-1.html</link>
      <description><![CDATA[在飞凌提供的OK10xx-linux-fs.tar.bz2中，使用flexbuild/docker/ubuntu/18.04/Dockerfile生成docker镜像。在此docker容器中执行build_1043_C3.sh时，出现了以下问题：
即出现了chroot: failed to run command \'ldconfig\': Exec format error，想请问这个是什么问题导致 ...]]></description>
      <category>飞凌LS1043A \\ LS1046A开发板技术支持专版</category>
      <author>1012081512</author>
      <pubDate>Tue, 10 Oct 2023 12:47:55 +0000</pubDate>
    </item>
    <item>
      <title>TF卡启动的问题</title>
      <link>http://bbs.witech.com.cn/thread-94766-1-1.html</link>
      <description><![CDATA[1043开发版，无法启动，用TF启动，卡死在如下打印处，按空格键无反应。
这个是什么问题？求助

U-Boot SPL 2018.03-00014-g4bc8bc19c4-dirty (Jul 11 2022 - 15:02:59 +0800)
Initialzing DDR using fixed setting
Configuring DDR for 1600 MT/s data rate
Tryin ...]]></description>
      <category>飞凌LS1043A \\ LS1046A开发板技术支持专版</category>
      <author>gamble</author>
      <pubDate>Fri, 11 Aug 2023 05:52:00 +0000</pubDate>
    </item>
    <item>
      <title>FCU2303关于以太网网络配置问题</title>
      <link>http://bbs.witech.com.cn/thread-94735-1-1.html</link>
      <description><![CDATA[目前有几台FCU2303，打算局域网组网使用，初始配置的是网桥，需要改成客户端模式，如果是单纯使用网口1对1的话怎么来使用，是每个网口都可以单独配置IP吗？麻烦请帮忙解答，感谢～]]></description>
      <category>飞凌LS1043A \\ LS1046A开发板技术支持专版</category>
      <author>water101</author>
      <pubDate>Fri, 28 Jul 2023 12:25:58 +0000</pubDate>
    </item>
    <item>
      <title>TF卡启动不成功</title>
      <link>http://bbs.witech.com.cn/thread-94666-1-1.html</link>
      <description><![CDATA[按照用户手册一步一步制作的TF卡，从TF卡启动后，提示memory may bot work，请问是什么原因？

OK1046A-C2 (Linux) 用户资料-20210622\\手册\\1046用户手册6.2章节制作TF烧写卡用镜像\\V2.x版本核心板\\firmware_ls1046ardb_uboot_64bit_sdboot_1040_5506.IMG]]></description>
      <category>飞凌LS1043A \\ LS1046A开发板技术支持专版</category>
      <author>bingoc0c0</author>
      <pubDate>Fri, 21 Jul 2023 02:21:45 +0000</pubDate>
    </item>
    <item>
      <title>NXP官方LSDK版本编译后能直接烧到飞凌核心板里吗？</title>
      <link>http://bbs.witech.com.cn/thread-94664-1-1.html</link>
      <description><![CDATA[NXP官方LSDK版本编译后（ Firmware、内核）烧到飞凌LS1046A V2核心板里，能运行吗？]]></description>
      <category>飞凌LS1043A \\ LS1046A开发板技术支持专版</category>
      <author>bingoc0c0</author>
      <pubDate>Thu, 20 Jul 2023 07:43:56 +0000</pubDate>
    </item>
    <item>
      <title>关于编译镜像问题</title>
      <link>http://bbs.witech.com.cn/thread-94200-1-1.html</link>
      <description><![CDATA[这里有两个问题想咨询一下：
1. 关于编译器，为什么提供的虚拟机里面的编译器版本和编译出来的启动镜像里面的编译器版本不一致？
2. 关于编译过程的参数问题，flex-builder -S参数含义是什么呀？为什么readme里面和编译手册里面这里的值不一致？]]></description>
      <category>飞凌LS1043A \\ LS1046A开发板技术支持专版</category>
      <author>nandykong</author>
      <pubDate>Wed, 10 May 2023 01:34:00 +0000</pubDate>
    </item>
    <item>
      <title>资源配置流程</title>
      <link>http://bbs.witech.com.cn/thread-94198-1-1.html</link>
      <description><![CDATA[在配置资源的时候（比如usb,串口，网口等），需要配置什么文件（比如设备树...等？），需要编译什么文件，整体流程是怎样的？
从资源配置，到最后的系统启动，整体流程介绍。]]></description>
      <category>飞凌LS1043A \\ LS1046A开发板技术支持专版</category>
      <author>阿森森</author>
      <pubDate>Mon, 08 May 2023 07:38:32 +0000</pubDate>
    </item>
    <item>
      <title>自启动脚本</title>
      <link>http://bbs.witech.com.cn/thread-94192-1-1.html</link>
      <description><![CDATA[文档中写道OK1046A 设置了开机自启脚本：/root/.forlinx.sh，我想咨询一下这个设置实在编译过程中的哪步设置的？谢谢了]]></description>
      <category>飞凌LS1043A \\ LS1046A开发板技术支持专版</category>
      <author>nandykong</author>
      <pubDate>Sat, 06 May 2023 04:02:52 +0000</pubDate>
    </item>
    <item>
      <title>关于制作烧写 TF 卡</title>
      <link>http://bbs.witech.com.cn/thread-94189-1-1.html</link>
      <description><![CDATA[制作完毕以后 上电启动 输出图片信息，板子是 V2.1  用的镜像也是]]></description>
      <category>飞凌LS1043A \\ LS1046A开发板技术支持专版</category>
      <author>nandykong</author>
      <pubDate>Fri, 05 May 2023 08:28:32 +0000</pubDate>
    </item>
  </channel>
</rss>