- 积分
- 10
贡献71
飞刀19 FD
注册时间2019-8-6
在线时间2 小时
扫一扫,手机访问本帖
|
发表于 2019-11-19 00:12:30
|
显示全部楼层
楼上的问题解决了吗?
我的也是UBNUTU 下执行SD卡更新盘提示不成功?
################################################################################
This script will create a bootable SD card from custom or pre-built binaries.
The script must be run with root permissions and from the bin directory of
the SDK
Example:
$ sudo ./create-sdcard.sh
Formatting can be skipped if the SD card is already formatted and
partitioned properly.
################################################################################
Availible Drives to write images to:
# major minor size name
1: 8 16 1921024 sdb
Enter Device Number: 1
sdb was selected
Checking the device is unmounted
unmounted /dev/sdb1
sdb1 sdb2 sdb3
1918976
################################################################################
Detected device has 1 partitions already
Re-partitioning will allow the choice of 1 partitions
################################################################################
Would you like to re-partition the drive anyways [y/n] : y
Now partitioning sdb ...
################################################################################
Now ** 1 partitions
################################################################################
1+0 records in
1+0 records out
1024 bytes (1.0 kB) copied, 0.0292023 s, 35.1 kB/s
Disk /dev/sdb doesn't contain a valid partition table
DISK SIZE - 1967128576 bytes
Checking that no-one is using this disk right now ...
OK
Disk /dev/sdb: 1015 cylinders, 61 heads, 62 sectors/track
sfdisk: ERROR: sector 0 does not have an msdos signature
/dev/sdb: unrecognized partition table type
Old situation:
No partitions found
New situation:
Units = mebibytes of 1048576 bytes, blocks of 1024 bytes, counting from 0
Device Boot Start End MiB #blocks Id System
/dev/sdb1 9+ 509- 501- 512461 c W95 FAT32 (LBA)
/dev/sdb2 0 - 0 0 0 Empty
/dev/sdb3 0 - 0 0 0 Empty
/dev/sdb4 0 - 0 0 0 Empty
Warning: no primary partition is marked bootable (active)
This does not matter for LILO, but the DOS MBR will not boot this disk.
Successfully wrote the new partition table
Re-reading the partition table ...
If you created or changed a DOS partition, /dev/foo7, say, then use dd(1)
to zero the first 512 bytes: dd if=/dev/zero of=/dev/foo7 bs=512 count=1
(See fdisk(8).)
################################################################################
Partitioning Boot
################################################################################
mkfs.vfat 3.0.12 (29 Oct 2011)
Mount the partitions
Emptying partitions
################################################################################
Copying files now... will take minutes
################################################################################
Copying boot partition
untar update.tar.bz2 to boot partition
tar: update.tar.bz2: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
Buring th u-boot.imx to sdcard
129+0 records in
129+0 records out
132096 bytes (132 kB) copied, 0.452729 s, 292 kB/s
dd: opening `boot/sdrun/u-boot.imx': No such file or directory
Syncing....
Un-mount the partitions
请问“您可以参考linux用户手册先要执行./pack-update.sh”,应该如何找到pack-update.sh???
|
|