TE2440-II 核心板启动问题，请求帮助
设置启动WINCE，核心板通过串口打印了一些信息，不能加载WINCE，不知是什么原因？恳请帮助，多谢！串口打印信息如下：
+------------------------------------------------------------+
| Forlinx 2440 Bootloader VER-6.0 www.witech.com.cn |
|------------------------------------------------------------|
|------------------------------------------------------------|
|CPU ID is 0x32440001 |
|FCLK=400MHz,HCLK=100MHz,PCLK=50MHz, CPU is running at 400MHz|
|UPLL=96MHz, UCLK=48MHz |
|Serial port 0, Baud rate is 115200. |
|OS image stored in NAND Flash. |
|Autoboot delay is 7 seconds. |
|Initial VGA now, Please wait... |
|VGA init done (VGA MODE 800*600) |
+------------------------------------------------------------+
Load eboot...
run 0x30038000...
Microsoft Windows CE Ethernet Bootloader Common Library Version 1.1 Built Mar3 2010 15:20:51
Microsoft Windows CE Bootloader for the Samsung SMDK2440 Version 2.4 Built Mar3 2010
FMD: ReadID (Mfg=ec, Dev=da)
FMD_Init: finished successful
FMD_Init: reserved_blocks 548
FMD_GetInfo
Press to launch image stored on boot media, or to enter boot monitor.
Initiating image launch in 5 seconds. 按一下空格，进入bootloader。选择wince
页:
[1]