版主看看我的板子是怎么回事
前段时间用的好好的，这两天不好使了。系统起不来，用SD卡重新烧程序也不成功，这下是不是没招了，看看我还能干点什么。不行就得寄给你们返修了下面是sd卡烧系统的log，读完filesize就不动了
Welcome! This tool just for TE/OK6410
+OALArgsInit()
SocID:0x36410101
Arguments area is initialized
-OALArgsInit()
INFO: (unsigned)C_IsrHandler : 0x800668C4
INFO: (unsigned)ASM_IsrHandler : 0x80069F80
INFO: (unsigned)pISR : 0xEA01A7D8
HSMMC init
Setting registers for the EPLL (for SDCLK) : SYSCon.
Setting registers for the GPIO.
Setting registers for the EPLL : HSMMCCon.
#### this SD card is made on SPEC 2.0
This SD card is made on SPEC 2.0
CardSize: 504365056
ClockConfig() Card Working Frequency = 24MHz
BP_Init
++FMD_Init() ****
FMD_Init() : Read ID = 0x0000ecd5
FMD_Init() : NUM_OF_BLOCKS = 4096
FMD_Init() : PAGES_PER_BLOCK = 128
FMD_Init() : SECTORS_PER_PAGE = 8
--FMD_Init()
FMD_GetInfo() : NUMBLOCKS = 4096(0x1000), SECTORSPERBLOCK = 128(0x80), BYTESPERSECTOR = 4096(0x1000)
FMD_GetInfo() : NUMBLOCKS = 4096(0x1000), SECTORSPERBLOCK = 128(0x80), BYTESPERSECTOR = 4096(0x1000)
wNUM_BLOCKS : 4096(0x1000)
++InitializeDisplay()
--InitializeDisplay()
Press to launch image stored on boot media, or to enter boot monitor.
Initiating image launch -1 seconds.
Starting auto-download ...
Erasethe block '0..3'
System ready!
Preparing for download...
IsCardInserted
f_mount return = 0x0
FileInfo.fsize = 0x2000
FileInfo.fsize = 0x2000
FileInfo.fsize = 0x2000
g_pDownPt = 0xA300211B
BL_IMAGE_TYPE_MANIFEST
BL_IMAGE_TYPE_UNKNOWN
Download BIN file information:
-----------------------------------------------------
: Base Address=0x0Length=0x2000
-----------------------------------------------------
Stepldr image
ImageStart = 0x0, ImageLength = 0x2000, LaunchAddr = 0x0
Completed file(s):
-------------------------------------------------------------------------------
: Address=0x0Length=0x2000Name="stepldr.nb0" Target=RAM
BP_InitiSighForSlcMlc = 1
++FMD_Init() ****
FMD_Init() : Read ID = 0x0000ecd5
FMD_Init() : NUM_OF_BLOCKS = 4096
FMD_Init() : PAGES_PER_BLOCK = 128
FMD_Init() : SECTORS_PER_PAGE = 8
--FMD_Init()
FMD_GetInfo() : NUMBLOCKS = 8192(0x2000), SECTORSPERBLOCK = 8(0x8), BYTESPERSECTOR = 2048(0x800)
dwImageLength = 0x2000
dwNumBlocks = 0x1
dwBlock(0x0) X g_FlashInfo.wSectorsPerBlock(0x8) = 0x0
dwBytesPerBlock : 16384
INFO: Step loader image stored to Smart Media.Please Reboot.Halting...
IsCardInserted
FileInfo.fsize = 0x1C81B
FileInfo.fsize = 0x1C81B
g_pDownPt = 0xA301C81B
BL_IMAGE_TYPE_BIN
Download BIN file information:
-----------------------------------------------------
: Base Address=0x80030000Length=0x1d86c
-----------------------------------------------------
Eboot image
rom_offset=0x0.
ImageStart = 0x80030000, ImageLength = 0x1D86C, LaunchAddr = 0x800420C0
Completed file(s):
-------------------------------------------------------------------------------
: Address=0x80030000Length=0x1D86CName="" Target=RAM
ROMHDR at Address 80030044h
BP_InitiSighForSlcMlc = 0
++FMD_Init() ****
FMD_Init() : Read ID = 0x0000ecd5
FMD_Init() : NUM_OF_BLOCKS = 4096
FMD_Init() : PAGES_PER_BLOCK = 128
FMD_Init() : SECTORS_PER_PAGE = 8
--FMD_Init()
FMD_GetInfo() : NUMBLOCKS = 4096(0x1000), SECTORSPERBLOCK = 128(0x80), BYTESPERSECTOR = 4096(0x1000)
dwImageLength = 0x1d86c
dwNumBlocks = 0x1
dwBlock(0x2) X g_FlashInfo.wSectorsPerBlock(0x80) = 0x100
dwBytesPerBlock : 524288
TOC {
dwSignature: 0x434F544E
BootCfg {
ConfigFlags: 0x20830
BootDelay: 0x1
ImageIndex: 1
IP: 0.0.0.0
MAC Address: 00:00:00:00:00:00
Port: 0.0.0.0
SubnetMask: 255.255.255.0
}
ID {
dwVersion: 0x20004
dwSignature: 0x45424F54
String: 'eboot.nb0'
dwImageType: 0x2
dwTtlSectors: 0x1E
dwLoadAddress: 0x80030000
dwJumpAddress: 0x800420C0
dwStoreOffset: 0x0
sgList.dwSector: 0x100
sgList.dwLength: 0x1E
}
ID {
dwVersion: 0x1
dwSignature: 0x43465348
String: ''
dwImageType: 0x2
dwTtlSectors: 0x0
dwLoadAddress: 0x0
dwJumpAddress: 0x0
dwStoreOffset: 0x0
}
chainInfo.dwLoadAddress: 0X00000000
chainInfo.dwFlashAddress: 0X00000000
chainInfo.dwLength: 0X00000000
}
INFO: Eboot image stored to Smart Media.Please Reboot.Halting...
Reserving Blocks ...
...reserve complete.
Enter LowLevelFormat .
Erasing flash block(s) (please wait): EraseBlocks: found a bad block (0x46f) - skipping...
EraseBlocks: found a bad block (0x586) - skipping...
EraseBlocks: found a bad block (0x587) - skipping...
EraseBlocks: found a bad block (0x588) - skipping...
EraseBlocks: found a bad block (0x589) - skipping...
EraseBlocks: found a bad block (0x96c) - skipping...
EraseBlocks: found a bad block (0xade) - skipping...
Done.
WriteMBR: MBR block = 0x3.
Done.
BinFS format done.
IsCardInserted
FileInfo.fsize = 0x23F940B 等了好长时间又蹦出来这么两句
IssueCommand() Command NOT Complete 0x8000 0x100
ReadFrommoviNAND() FAIL OUT----------- 版主哪去了？我这项目急用呢，要是板子有问题就赶紧返修了，怎么等了一天也没人回复
页:
[1]