fl2440 插入U盘之后出现下面的信息！
当插入U盘的时候出现下面 的提示信息应该是安装驱动成功了，但是我在对应的/dev下面没发现对应的sda4驱动名就没发挂载，请问如何解决，# usb 1-1.2: USB disconnect, address 3usb 1-1.1: new full speed USB device using s3c2410-ohci and address 5
usb 1-1.1: configuration #1 chosen from 1 choice
scsi1 : SCSI emulation for USB Mass Storage devices
usb 1-1.1: New USB device found, idVendor=0930, idProduct=6545
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.1: Product: DataTraveler G3
usb 1-1.1: Manufacturer: Kingston
usb 1-1.1: SerialNumber: 001372982B41EC2085D202EF
scsi 1:0:0:0: Direct-Access Kingston DataTraveler G3PMAP PQ: 0 ANSI: 0 CCS
sd 1:0:0:0: 30481152 512-byte hardware sectors: (15.6 GB/14.5 GiB)
sd 1:0:0:0: Write Protect is off
sd 1:0:0:0: Assuming drive cache: write through
sd 1:0:0:0: 30481152 512-byte hardware sectors: (15.6 GB/14.5 GiB)
sd 1:0:0:0: Write Protect is off
sd 1:0:0:0: Assuming drive cache: write through
sda: sda4
sd 1:0:0:0: Attached SCSI removable disk
sd 1:0:0:0: Attached scsi generic sg0 type 0 楼主，我已经在另一个帖子中回复您了：http://bbs.witech.com.cn/thread-47054-1-1.html
页:
[1]