系统启动不成功
OKMX6X-C 由安卓系统变为linux+qt 系统，采用SD卡烧写，烧写成功，但是启动不成功，一直报如下错误信息，usbcore: registered new inte**ce driver usb-storage
USB Mass Storage support registered.
usbcore: registered new inte**ce driver usbserial
usbserial: USB Serial Driver core
USB Serial support registered for GSM modem (1-port)
usbcore: registered new inte**ce driver option
option: v0.7.2:USB Driver for GSM modems
USB Serial support registered for pl2303
usbcore: registered new inte**ce driver pl2303
pl2303: Prolific PL2303 USB to serial adaptor driver
ARC USBOTG Device Controller driver (1 August 2005)
mousedev: PS/2 mouse device common for all mice
input: gpio-keys as /devices/platform/gpio-keys/input/input0
<<-GTP-INFO->> GTP driver installing...
<<-GTP-INFO->> GTP Driver Version: V2.2<2014/01/14>
<<-GTP-INFO->> GTP Driver Built@11:16:06, Oct 19 2016
<<-GTP-INFO->> GTP I2C Address: 0x5d
<<-GTP-INFO->> Guitar reset
<<-GTP-ERROR->> I2C Write: 0x8041, 1 bytes failed, errcode: -5!
<<-GTP-ERROR->> I2C Read: 0x8047, 1 bytes failed, errcode: -5! Process reset.
<<-GTP-INFO->> Guitar reset
usb 2-1: new high speed USB device number 2 using fsl-ehci
<<-GTP-ERROR->> I2C Write: 0x8041, 1 bytes failed, errcode: -5!
<<-GTP-ERROR->> GTP i2c test failed time 1.
<<-GTP-ERROR->> I2C Read: 0x8047, 1 bytes failed, errcode: -5! Process reset.
<<-GTP-INFO->> Guitar reset
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
<<-GTP-ERROR->> I2C Write: 0x8041, 1 bytes failed, errcode: -5!
<<-GTP-ERROR->> GTP i2c test failed time 2.
<<-GTP-ERROR->> I2C Read: 0x8047, 1 bytes failed, errcode: -5! Process reset.
<<-GTP-INFO->> Guitar reset
<<-GTP-ERROR->> I2C Write: 0x8041, 1 bytes failed, errcode: -5!
<<-GTP-ERROR->> GTP i2c test failed time 3.
<<-GTP-ERROR->> I2C Read: 0x8047, 1 bytes failed, errcode: -5! Process reset.
<<-GTP-INFO->> Guitar reset
usb 2-1.3: new high speed USB device number 3 using fsl-ehci
<<-GTP-ERROR->> I2C Write: 0x8041, 1 bytes failed, errcode: -5!
<<-GTP-ERROR->> GTP i2c test failed time 4.
<<-GTP-ERROR->> I2C Read: 0x8047, 1 bytes failed, errcode: -5! Process reset.
<<-GTP-INFO->> Guitar reset
<<-GTP-ERROR->> I2C Write: 0x8041, 1 bytes failed, errcode: -5!
<<-GTP-ERROR->> GTP i2c test failed time 5.
<<-GTP-ERROR->> I2C communication ERROR!
<<-GTP-ERROR->> I2C Read: 0x8140, 6 bytes failed, errcode: -5! Process reset.
<<-GTP-INFO->> Guitar reset
<<-GTP-ERROR->> I2C Write: 0x8041, 1 bytes failed, errcode: -5!
<<-GTP-ERROR->> GTP read version failed
<<-GTP-ERROR->> Read version failed.
<<-GTP-ERROR->> I2C Read: 0x8047, 240 bytes failed, errcode: -5! Process reset.
<<-GTP-INFO->> Guitar reset
<<-GTP-ERROR->> I2C Write: 0x8041, 1 bytes failed, errcode: -5!
您好：
OTG烧写可以启动吗？您用的是我们提供的出厂镜像吗？ 您这个lvds屏的触摸报的错，现在您默认的是lvds屏，您那边没有接屏导致i2c检测不到设备报的错，现在有两个方法，1是接上lvds屏再启动看还是这样吗，2您直接根据咱们linux手册上面修改显示屏的方案，将其改成别的屏体，再上电应该就不会报错了
页:
[1]