IMX6Q更新系统受阻 平台IMX6Q-C,底板V1.1
UBNUTU 下执行SD卡更新盘提示不成功.我将BIN SYSTEM两个文件夹的内容直接复制到SD卡上,拨码到SD卡，复位或重上电，串口上输也的是全0X00，就没有后续了。UBNUTU 用FORLINX网盘提供的那个12.04
################################################################################
This script will create a bootable SD card from custom or pre-built binaries.
The script must be run with root permissions and from the bin directory of
the SDK
Example:
$ sudo ./create-sdcard.sh
Formatting can be skipped if the SD card is already formatted and
partitioned properly.
################################################################################
Availible Drives to write images to:
#major minor size name
1: 8 16 976896 sdb
Enter Device Number: 1
sdb was selected
Checking the device is unmounted
unmounted /dev/sdb1
unmounted /dev/sdb2
sdb1sdb2 sdb3
321268 642600
################################################################################
Detected device has 1 partitions already
Re-partitioning will allow the choice of 1 partitions
################################################################################
Would you like to re-partition the drive anyways : y
Now partitioning sdb ...
################################################################################
Now ** 1 partitions
################################################################################
记录了2048+0 的读入
记录了2048+0 的写出
1048576字节(1.0 MB)已复制，0.626457 秒，1.7 MB/秒
DISK SIZE - 1000341504 bytes
Checking that no-one is using this disk right now ...
OK
磁盘 /dev/sdb：121 个柱面，255 个磁头，63 个扇区/磁道
Old situation:
Units = mebibytes of 1048576 bytes, blocks of 1024 bytes, counting from 0
Device Boot Start End MiB #blocks IdSystem
/dev/sdb1 * 0+ 313- 314- 321268+ cW95 FAT32 (LBA)
/dev/sdb2 321+ 949- 628- 642600 83Linux
/dev/sdb3 0 - 0 0 0空
/dev/sdb4 0 - 0 0 0空
New situation:
Units = mebibytes of 1048576 bytes, blocks of 1024 bytes, counting from 0
Device Boot Start End MiB #blocks IdSystem
/dev/sdb1 7+ 949- 942- 963900 cW95 FAT32 (LBA)
/dev/sdb2 0 - 0 0 0空
/dev/sdb3 0 - 0 0 0空
/dev/sdb4 0 - 0 0 0空
Warning: no primary partition is marked bootable (active)
This does not matter for LILO, but the DOS MBR will not boot this disk.
成功写入了新分区表
正在重新读取分区表...;
If you created or changed a DOS partition, /dev/foo7, say, then use dd(1)
to zero the first 512 bytes:dd if=/dev/zero of=/dev/foo7 bs=512 count=1
(See fdisk(8).)
################################################################################
Partitioning Boot
################################################################################
mkfs.vfat 3.0.12 (29 Oct 2011)
Mount the partitions
Emptying partitions
################################################################################
Copying files now... will take minutes
################################################################################
Copying boot partition
untar update.tar.bz2 to boot partition
tar: update.tar.bz2：无法 open: 没有那个文件或目录
tar: Error is not recoverable: exiting now
Buring th u-boot.bin to sdcard
记录了500+0 的读入
记录了500+0 的写出
512000字节(512 kB)已复制，0.374236 秒，1.4 MB/秒
dd: 正在打开"boot/bin/u-boot.bin": 没有那个文件或目录
Syncing....
Un-mount the partitions
Remove created temp directories
Operation Finished
usb otg 也用不成功。 提示 iitialize operation failed,please refer to " mfgtool.log" for detailed information,error code:4
IMX6Q系统信息图片汇总
您好，您的ubuntu环境设置成root用户权限，然后再进行制卡操作，您可以参考linux用户手册先要执行./pack-update.sh,然后再执行./createSdCard.sh脚本，您执行的脚本的名字和我们的名字也有些差异，建议您核对一下开发板的信息以及下载的资料的信息是否一致。 您好：
这个烧写工具报的错应该是cfg文件配置的有问题，您打开该目录下cfg.ini文件看看是如何配置的，如下是会报您的那个错误的，应将ubuntu改为qt或Android
name = ubuntu-SabreSD-eMMC 通过USB OTG烧写成功并运行成功。SD卡用1G、8G没无更新系统。2G可以更新系统。但是更新系统后没法从MMC上启动。 SD 卡更新
楼上的问题解决了吗？
我的也是UBNUTU 下执行SD卡更新盘提示不成功？
################################################################################
This script will create a bootable SD card from custom or pre-built binaries.
The script must be run with root permissions and from the bin directory of
the SDK
Example:
$ sudo ./create-sdcard.sh
Formatting can be skipped if the SD card is already formatted and
partitioned properly.
################################################################################
Availible Drives to write images to:
#major minor size name
1: 8 16 1921024 sdb
Enter Device Number: 1
sdb was selected
Checking the device is unmounted
unmounted /dev/sdb1
sdb1sdb2 sdb3
1918976
################################################################################
Detected device has 1 partitions already
Re-partitioning will allow the choice of 1 partitions
################################################################################
Would you like to re-partition the drive anyways : y
Now partitioning sdb ...
################################################################################
Now ** 1 partitions
################################################################################
1+0 records in
1+0 records out
1024 bytes (1.0 kB) copied, 0.0292023 s, 35.1 kB/s
Disk /dev/sdb doesn't contain a valid partition table
DISK SIZE - 1967128576 bytes
Checking that no-one is using this disk right now ...
OK
Disk /dev/sdb: 1015 cylinders, 61 heads, 62 sectors/track
sfdisk: ERROR: sector 0 does not have an msdos signature
/dev/sdb: unrecognized partition table type
Old situation:
No partitions found
New situation:
Units = mebibytes of 1048576 bytes, blocks of 1024 bytes, counting from 0
Device Boot Start End MiB #blocks IdSystem
/dev/sdb1 9+ 509- 501- 512461 cW95 FAT32 (LBA)
/dev/sdb2 0 - 0 0 0Empty
/dev/sdb3 0 - 0 0 0Empty
/dev/sdb4 0 - 0 0 0Empty
Warning: no primary partition is marked bootable (active)
This does not matter for LILO, but the DOS MBR will not boot this disk.
Successfully wrote the new partition table
Re-reading the partition table ...
If you created or changed a DOS partition, /dev/foo7, say, then use dd(1)
to zero the first 512 bytes:dd if=/dev/zero of=/dev/foo7 bs=512 count=1
(See fdisk(8).)
################################################################################
Partitioning Boot
################################################################################
mkfs.vfat 3.0.12 (29 Oct 2011)
Mount the partitions
Emptying partitions
################################################################################
Copying files now... will take minutes
################################################################################
Copying boot partition
untar update.tar.bz2 to boot partition
tar: update.tar.bz2: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
Buring th u-boot.imx to sdcard
129+0 records in
129+0 records out
132096 bytes (132 kB) copied, 0.452729 s, 292 kB/s
dd: opening `boot/sdrun/u-boot.imx': No such file or directory
Syncing....
Un-mount the partitions
请问“您可以参考linux用户手册先要执行./pack-update.sh”，应该如何找到pack-update.sh？？？
页:
[1]