OKMX6DL-S开发板，原厂镜像刷写失败！
本帖最后由 jyerz 于 2019-1-30 11:23 编辑如题，
型号:OKMX6DL-S开发板,1GB RAM（http://www.forlinx.com/57.htm）
原厂镜像与自己新编译的镜像，都刷写失败。
PS：所有步骤都是按照文档中，i.MX6-Linux用户手册-V3.1-2016-10-10.pdf
中4.1.1进行操作的
您好
您可以换一台电脑尝试一下，可能是有驱动未安装 飞凌-chongzi 发表于 2019-1-31 08:34
您好
您可以换一台电脑尝试一下，可能是有驱动未安装
您好！换过电脑试过了。同样的错误，然后驱动也手动装过
因为手册上建议用win7，一开始我也以为是Win10的影响。但是后来，在跟你们取得联系之前，用win7试过了，也不行，怀疑可能是硬件方面的原因。。
希望可以尽快跟你们的工程师取得联系，谢谢！ 您好
建议您把烧写的时候终端打印的烧写信息形成文档发过来，我们这边给您看一下 本帖最后由 jyerz 于 2019-1-31 15:36 编辑
飞凌-chongzi 发表于 2019-1-31 14:16
您好
建议您把烧写的时候终端打印的烧写信息形成文档发过来，我们这边给您看一下
您好！刷写器日志我放到帖子的附件中了的哦！
还请尽快联系你们工程师那边！
DLL version: 2.3.3
Wednesday, January 30, 2019 16:40:02 Start new logging
ModuleID LevelID: CMyExceptionHandler thread is running
ModuleID LevelID: new MxHidDeviceClass
ModuleID LevelID: new MxHidDeviceClass
ModuleID LevelID: new MxHidDeviceClass
ModuleID LevelID: new MxHidDeviceClass
ModuleID LevelID: Device Manager thread is running
ModuleID LevelID: DeviceManager::DevChangeWnd::OnDeviceChange() - DEVICE_ARRIVAL_EVT(\\?\USB#VID_15A2&PID_0061#5&28e727fc&0&6#{a5dcbf10-6530-11d2-901f-00c04fb951ed})
ModuleID LevelID: DeviceManager::DevChangeWnd::OnDeviceChange() - end
ModuleID LevelID: DeviceManager::OnMsgDeviceEvent() - DEVICE_ARRIVAL_EVT(\\?\USB#VID_15A2&PID_0061#5&28e727fc&0&6#{a5dcbf10-6530-11d2-901f-00c04fb951ed})
ModuleID LevelID: DeviceClass::FindDeviceByUsbPath--DeviceListType_Current, _devices.size: 0
ModuleID LevelID: DeviceClass::FindDeviceByUsbPath() - DeviceListType_New--index: 0
ModuleID LevelID: DeviceClass::FindDeviceByUsbPath() - DeviceListType_New--devPath: \\?\hid#vid_275d&pid_0ba6#6&e9ae892&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
ModuleID LevelID: DeviceClass::FindDeviceByUsbPath() - DeviceListType_New--index: 1
ModuleID LevelID: DeviceClass::FindDeviceByUsbPath() - DeviceListType_New--devPath: \\?\hid#vid_1a2c&pid_2c27&mi_00#7&12948a17&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
ModuleID LevelID: DeviceClass::FindDeviceByUsbPath() - DeviceListType_New--index: 2
ModuleID LevelID: DeviceClass::FindDeviceByUsbPath() - DeviceListType_New--devPath: \\?\hid#vid_1a2c&pid_2c27&mi_01&col01#7&1142b3ab&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
ModuleID LevelID: DeviceClass::FindDeviceByUsbPath() - DeviceListType_New--index: 3
ModuleID LevelID: DeviceClass::FindDeviceByUsbPath() - DeviceListType_New--devPath: \\?\hid#vid_1a2c&pid_2c27&mi_01&col02#7&1142b3ab&0&0001#{4d1e55b2-f16f-11cf-88cb-001111000030}
ModuleID LevelID: DeviceClass::FindDeviceByUsbPath() - DeviceListType_New--index: 4
ModuleID LevelID: DeviceClass::FindDeviceByUsbPath() - DeviceListType_New--devPath:
ModuleID LevelID: DeviceClass::FindDeviceByUsbPath--DeviceListType_Current, _devices.size: 0
ModuleID LevelID: DeviceClass::FindDeviceByUsbPath() - DeviceListType_New--index: 0
ModuleID LevelID: DeviceClass::FindDeviceByUsbPath() - DeviceListType_New--devPath: \\?\hid#vid_275d&pid_0ba6#6&e9ae892&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
ModuleID LevelID: DeviceClass::FindDeviceByUsbPath() - DeviceListType_New--index: 1
ModuleID LevelID: DeviceClass::FindDeviceByUsbPath() - DeviceListType_New--devPath: \\?\hid#vid_1a2c&pid_2c27&mi_00#7&12948a17&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
ModuleID LevelID: DeviceClass::FindDeviceByUsbPath() - DeviceListType_New--index: 2
ModuleID LevelID: DeviceClass::FindDeviceByUsbPath() - DeviceListType_New--devPath: \\?\hid#vid_1a2c&pid_2c27&mi_01&col01#7&1142b3ab&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
ModuleID LevelID: DeviceClass::FindDeviceByUsbPath() - DeviceListType_New--index: 3
ModuleID LevelID: DeviceClass::FindDeviceByUsbPath() - DeviceListType_New--devPath: \\?\hid#vid_1a2c&pid_2c27&mi_01&col02#7&1142b3ab&0&0001#{4d1e55b2-f16f-11cf-88cb-001111000030}
ModuleID LevelID: DeviceClass::FindDeviceByUsbPath() - DeviceListType_New--index: 4
ModuleID LevelID: DeviceClass::FindDeviceByUsbPath() - DeviceListType_New--devPath: \\?\hid#vid_15a2&pid_0061#6&741443&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
ModuleID LevelID: new MxHidDevice
ModuleID LevelID: DeviceClass::FindDeviceByUsbPath--DeviceListType_New, devInstPathToFind: USB\VID_15A2&PID_0061\5&28E727FC&0&6, _deviceInstanceID: USB\VID_15A2&PID_0061\5&28E727FC&0&6
ModuleID LevelID: DeviceClass::FindDeviceByUsbPath--DeviceListType_New, Find the device, Port: 6
ModuleID LevelID: DeviceClass::AddUsbDevice() successful USB#VID_15A2&PID_0061#5&28E727FC&0&6#{A5DCBF10-6530-11D2-901F-00C04FB951ED} add to current list, retrycount: 1
ModuleID LevelID: DeviceManager::OnMsgDeviceEvent() - DEVICE_ARRIVAL_EVT, vid_15a2&pid_0061, Hub:4-Port:6
ModuleID LevelID: DeviceManager::OnMsgDeviceEvent() - DEVICE_ARRIVAL_EVT, Notify
ModuleID LevelID: CmdOpreation--OnDeviceChangeNotify, Volume Arrive/Remove or Device Arrive/Remove
ModuleID LevelID: CmdOpreation--OnDeviceChangeNotify, m_p_usb_port is not NULL, so only refresh
ModuleID LevelID: CmdOpreation--OnDeviceChangeNotify, Volume/Device Arrive
ModuleID LevelID: CmdOpreation--set m_hDeviceArriveEvent.
ModuleID LevelID: CmdOpreation--WaitforEvents device arrive1
ModuleID LevelID: CmdOperation device chagned and reset to state 0
ModuleID LevelID: CmdOperation, skip current command, so SetEvent(hDevCanDeleteEvent)
ModuleID LevelID: ExecuteCommand--Boot, File is E:\mfgtools\Profiles\linux\OS Firmware\firmware\u-boot-imx6dlsabresd_sd.imx
ModuleID LevelID: ExecuteCommand--Load, File is E:\mfgtools\Profiles\linux\OS Firmware\firmware\zImage, address is 0x12000000
ModuleID LevelID: PortMgrDlg(0)--Command Load excute successfully, retry count: 0
ModuleID LevelID: ExecuteCommand--Load, File is E:\mfgtools\Profiles\linux\OS Firmware\firmware\fsl-image-mfgtool-initramfs-imx6qdlsolo.cpio.gz.u-boot, address is 0x12C00000
ModuleID LevelID: PortMgrDlg(0)--Command Load excute successfully, retry count: 0
ModuleID LevelID: CmdOperation, skip current command, so SetEvent(hDevCanDeleteEvent)
ModuleID LevelID: ExecuteCommand--Load, File is E:\mfgtools\Profiles\linux\OS Firmware\firmware\zImage-imx6dl-sabresd.dtb, address is 0x18000000
ModuleID LevelID: PortMgrDlg(0)--Command Load excute successfully, retry count: 0
ModuleID LevelID: ExecuteCommand--Jump
ModuleID LevelID: *********MxHidDevice Jump to Ramkernel successfully!**********
ModuleID LevelID: CmdOperation, current state command has been finished and the last command is successful, so SetEvent(hDevCanDeleteEvent)
ModuleID LevelID: DeviceManager::DevChangeWnd::OnDeviceChange() - DEVICE_REMOVAL_EVT(\\?\USB#VID_15A2&PID_0061#5&28e727fc&0&6#{a5dcbf10-6530-11d2-901f-00c04fb951ed})
ModuleID LevelID: DeviceManager::DevChangeWnd::OnDeviceChange() - end
ModuleID LevelID: DeviceManager::OnMsgDeviceEvent() - DEVICE_REMOVAL_EVT(\\?\USB#VID_15A2&PID_0061#5&28e727fc&0&6#{a5dcbf10-6530-11d2-901f-00c04fb951ed})
ModuleID LevelID: DeviceClass::FindDeviceByUsbPath--DeviceListType_Current, _devices.size: 1
ModuleID LevelID: DeviceClass::FindDeviceByUsbPath--DeviceListType_Current, devInstPathToFind: USB\VID_15A2&PID_0061\5&28E727FC&0&6, _deviceInstanceID: USB\VID_15A2&PID_0061\5&28E727FC&0&6
ModuleID LevelID: DeviceClass::FindDeviceByUsbPath--DeviceListType_Current, Find the device
ModuleID LevelID: DeviceManager::OnMsgDeviceEvent() - DEVICE_REMOVAL_EVT, vid_15a2&pid_0061, Hub:4-Port:6
ModuleID LevelID: DeviceManager::OnMsgDeviceEvent() - DEVICE_REMOVAL_EVT, Notify
ModuleID LevelID: CmdOpreation--OnDeviceChangeNotify, Volume Arrive/Remove or Device Arrive/Remove
ModuleID LevelID: CmdOpreation--OnDeviceChangeNotify, m_p_usb_port is not NULL, so only refresh
ModuleID LevelID: CmdOpreation--OnDeviceChangeNotify, Volume/Device Remove
ModuleID LevelID: CmdOpreation--set m_hDeviceRemoveEvent.
ModuleID LevelID: CmdOpreation--WaitforEvents device remove1
ModuleID LevelID: DeviceManager::OnMsgDeviceEvent()-DEVICE_REMOVAL_EVT, hDevCanDeleteEvent has been set
ModuleID LevelID: delete MxHidDevice
ModuleID LevelID: DeviceManager::DevChangeWnd::OnDeviceChange() - DEVICE_ARRIVAL_EVT(\\?\USB#VID_066F&PID_37FF#5&28e727fc&0&6#{a5dcbf10-6530-11d2-901f-00c04fb951ed})
ModuleID LevelID: DeviceManager::DevChangeWnd::OnDeviceChange() - end
ModuleID LevelID: DeviceManager::OnMsgDeviceEvent() - DEVICE_ARRIVAL_EVT(\\?\USB#VID_066F&PID_37FF#5&28e727fc&0&6#{a5dcbf10-6530-11d2-901f-00c04fb951ed})
ModuleID LevelID: DeviceManager::OnMsgDeviceEvent() - DEVICE_ARRIVAL_EVT, vid_066f&pid_37ff, not handled
ModuleID LevelID: DeviceManager::DevChangeWnd::OnDeviceChange() - VOLUME_ARRIVAL_EVT(G)
ModuleID LevelID: DeviceManager::DevChangeWnd::OnDeviceChange() - end
ModuleID LevelID: DeviceManager::OnMsgDeviceEvent() - VOLUME_ARRIVAL_EVT(G)
ModuleID LevelID: VolumeDeviceClass::AddUsbDevice()G
ModuleID LevelID: DeviceTypeDisk--_devices size: 1
ModuleID LevelID: Volume--StorageDisk, Disk->_driveNumber:2, Volume->_diskNumber:2
ModuleID LevelID: DeviceTypeDisk--find Disk device: 04DF2758
ModuleID LevelID: Device::hubIndex::getmsc, return the port index is: 6
ModuleID LevelID: VolumeDeviceClass::AddUsbDevice() successful G add to current list, retrycount: 0
ModuleID LevelID: Device::hubIndex::getmsc, return the port index is: 6
ModuleID LevelID: DeviceManager::OnMsgDeviceEvent() - VOLUME_ARRIVAL_EVT-Disk(G), Hub:4-Port:6
ModuleID LevelID: DeviceManager::OnMsgDeviceEvent() - VOLUME_ARRIVAL_EVT, Notify
ModuleID LevelID: CmdOpreation--OnDeviceChangeNotify, Volume Arrive/Remove or Device Arrive/Remove
ModuleID LevelID: CmdOpreation--OnDeviceChangeNotify, m_p_usb_port is not NULL, so only refresh
ModuleID LevelID: CmdOpreation--OnDeviceChangeNotify, Volume/Device Arrive
ModuleID LevelID: CmdOpreation--set m_hDeviceArriveEvent.
ModuleID LevelID: CmdOpreation--WaitforEvents device arrive1
ModuleID LevelID: CmdOperation device chagned and reset to state 1
ModuleID LevelID: ExecuteCommand--Push, Body is send
ModuleID LevelID: ExecuteCommand--Push, Body is $ tar xf $FILE
ModuleID LevelID: ExecuteCommand--Push, Body is $ sh mksdcard-android.sh /dev/mmcblk3
ModuleID LevelID: ExecuteCommand--Push, Body is $ dd if=/dev/zero of=/dev/mmcblk3 bs=1k seek=384 conv=fsync count=129
ModuleID LevelID: ExecuteCommand--Push, Body is $ echo 0 > /sys/block/mmcblk3boot0/force_ro
ModuleID LevelID: PortMgrDlg(0)--MSCDevice--Command Push(no file) excute failed
ModuleID LevelID: CmdOperation, current command executed failed, so SetEvent(hDevCanDeleteEvent)
ModuleID LevelID: CCmdOpreation thread is Closed
ModuleID LevelID: CCmdOpreation thread is Closed
ModuleID LevelID: DeviceManager::OnMsgDeviceEvent() - EVENT_KILL
ModuleID LevelID: CMyExceptionHandler::OnMsgExceptionEvent() - KillExceptionHandlerThread
ModuleID LevelID: Exception Handler thread is closed
ModuleID LevelID: delete MxHidDeviceClass
ModuleID LevelID: Device Manager thread is closed
您好
实在不好意思，放假期间没有看到回复，不知道您的问题解决了没有，您可以烧写MX6Q-S3的资料，是最新更新的可烧写进去。另外，可以发一下您的串口烧写打印信息，而不是刷写器的日志。 飞凌-chongzi 发表于 2019-2-13 08:33
您好
实在不好意思，放假期间没有看到回复，不知道您的问题解决了没有，您可以烧写MX6Q-S3的资料，是最新 ...
您好！这边问题依然存在，如刷写失败截图所示，打印日志在access boot partition 1处中断，之前的日志正常，但是提示日志大多由于显示过快，无法记录（刷写器也没有记录打印日志的文件）。。。还请尽快联系贵公司工程师解决下！ 您好
您的开发板大概什么时间订购的，不耽误您开发进度的情况下，建议您使用最新镜像进行烧写，您可以使用MX6Q-S3最新发布的资料进行烧写开发，如果您那儿没有MX6Q-S3的资料可以找销售开通一下权限 飞凌-chongzi 发表于 2019-2-13 16:28
您好
您的开发板大概什么时间订购的，不耽误您开发进度的情况下，建议您使用最新镜像进行烧写，您可以使用 ...
您好！这边出库单上日期是2019-01-21，是收到开发板才找销售开通的权限，然后下载的资料，开发板OKMX6DL-S3没问题，也是最新的资料！ 我之前也遇到类似问题，最后发现是windows的CMD没有用管理员身份运行，仅供参考。
页:
[1]