sys_config.fex如何修改更新
小弟现在用的是FETA40i-C核心板，刚打样了底板，现在需要驱动双8位LVDS屏 和 SDIO wifi 。A40i IO驱动在sys_config.fex内修改，每次编译或者./build.sh pack 打包，sys_config.fex均会复原，请问如何修改该文件使能配置。
谢谢！
您需要修改的是root@ubuntu:~/workspace/allwinner/A40i/bsp/lichee/tools/pack/chips/sun8iw11p1/configs/OKA40i_C# ls
bootlogo.bmp sys_config1280x800.fex
sys_config1024x600_100M.fex sys_config1280x800_v1.fex
sys_config1024x600.fex sys_config800x480.fex
sys_config1024x600mipi.fex sys_config800x480_v1.fex
sys_config1024x600mipi-gt9xx.fexsys_configFCU2401_100M.fex
sys_config1024x600mipi_v1.fex sys_configFCU2401.fex
sys_config1024x600_pwm4.fex sys_config.fex
sys_config1024x600_v1.fex sys_config.fex_sdk_rgb_1024600
sys_config1080p.fex sys_config_new_evb_lvds1024600.fex
sys_config1080p_v1.fex
带有分辨率的配置文件，具体修改哪一个，取决于您打包生成镜像的分辨率 请问如何将sys_config1080p.fex 添加到编译文件里面 root@ubuntu:~/workspace/allwinner/A40i/bsp/lichee# vi .buildconfig
1 export LICHEE_CHIP=sun8iw11p1
2 export LICHEE_PLATFORM=linux
3 export LICHEE_KERN_VER=linux-3.10
4 export LICHEE_ARCH=arm
5 export LICHEE_BOARD=OKA40i_C
6 export LICHEE_BUILD_ROOT=buildroot-201611
7 export LICHEE_GNUEABI=gnueabihf
8 export LICHEE_QTVER=5.9.0
9 export LICHEE_RESOLUTION=1080P
将其按如图所示进行修改。保存后退出。
然后编译#./build.sh
打包#./build.sh pack
页:
[1]