TF卡启动 TFA失败
自己研制的1028A开发板，TF卡烧录时候TFA报错：有时是BL2阶段加载BL32（ image_id: 4 ）报错，有时是BL2阶段加载BL33（ image_id: 5）报错。具体错误如下，请问该怎么解决此问题INFO: RCW BOOT SRC is SDINFO: SoC workaround for DDR Errata A009803 was appliedINFO: SoC workaround for DDR Errata A009942 was appliedINFO: SoC workaround for DDR Errata A010165 was appliedINFO: time base 0 msNOTICE:Fixed DDR on boardINFO: Time after parsing SPD 4 msINFO: Time before programming controller 8 msNOTICE:2 GB DDR4, 32-bit, CL=11, ECC offINFO: Time used by DDR driver 18 msINFO: RCW BOOT SRC is SDINFO: esdhc_emmc_initINFO: Card detected successfullyINFO: init done:NOTICE:BL2: Built : 11:17:14, Feb 28 2025INFO: Configuring TrustZone ControllerINFO: ******* image_id: 3 ********INFO: image_base: 4225761280;image_size: 0;image_max_size: 2097152;INFO: type: 1;version: 2;size: 24;attr: 4INFO: ******* image_id: 4 ********INFO: image_base: 4227858432;image_size: 0;image_max_size: 67108864;INFO: type: 1;version: 2;size: 24;attr: 0INFO: ******* image_id: 5 ********INFO: image_base: 2181038080;image_size: 0;image_max_size: 2044723200;INFO: type: 1;version: 2;size: 24;attr: 0INFO: BL2: Doing platform setupNOTICE: start bl2_load_images id 3INFO: BL2: Loading image id 3INFO: ****start load_image***INFO: Loading image id=3 at address 0xfbe00000INFO: Image id=3 loaded: 0xfbe00000 - 0xfbe0d23dINFO: load_auth_image_internal: 0INFO: plat_mboot_measure_image err: 0NOTICE: start post_image_load id 3NOTICE: start bl2_load_images id 4INFO: BL2: Loading image id 4INFO: ****start load_image***INFO: sd-mmc read done.WARNING: Firmware Image Package header check failed. id=0WARNING: Failed to obtain reference to image id=4 (-2)INFO: load_auth_image_internal: -2ERROR: BL2: Failed to load image id 4 (-2)Authentication failureINFO: RCW BOOT SRC is SDINFO: SoC workaround for DDR Errata A009803 was appliedINFO: SoC workaround for DDR Errata A009942 was appliedINFO: SoC workaround for DDR Errata A010165 was appliedINFO: time base 0 msNOTICE:Fixed DDR on boardINFO: Time after parsing SPD 4 msINFO: Time before programming controller 8 msNOTICE:2 GB DDR4, 32-bit, CL=11, ECC offINFO: Time used by DDR driver 18 msINFO: RCW BOOT SRC is SDINFO: esdhc_emmc_initINFO: Card detected successfullyINFO: init done:NOTICE:BL2: Built : 11:17:14, Feb 28 2025INFO: Configuring TrustZone ControllerINFO: ******* image_id: 3 ********INFO: image_base: 4225761280;image_size: 0;image_max_size: 2097152;INFO: type: 1;version: 2;size: 24;attr: 4INFO: ******* image_id: 4 ********INFO: image_base: 4227858432;image_size: 0;image_max_size: 67108864;INFO: type: 1;version: 2;size: 24;attr: 0INFO: ******* image_id: 5 ********INFO: image_base: 2181038080;image_size: 0;image_max_size: 2044723200;INFO: type: 1;version: 2;size: 24;attr: 0INFO: BL2: Doing platform setupNOTICE: start bl2_load_images id 3INFO: BL2: Loading image id 3INFO: ****start load_image***INFO: sd-mmc read done.INFO: sd-mmc read done.INFO: sd-mmc read done.INFO: Loading image id=3 at address 0xfbe00000INFO: sd-mmc read done.INFO: sd-mmc read done.INFO: Image id=3 loaded: 0xfbe00000 - 0xfbe0d23dINFO: load_auth_image_internal: 0INFO: plat_mboot_measure_image err: 0NOTICE: start post_image_load id 3NOTICE: start bl2_load_images id 4INFO: BL2: Loading image id 4INFO: ****start load_image***INFO: Loading image id=4 at address 0xfc000000INFO: Image id=4 loaded: 0xfc000000 - 0xfc07bdc0INFO: load_auth_image_internal: 0INFO: plat_mboot_measure_image err: 0NOTICE: start post_image_load id 4NOTICE: start bl2_load_images id 5INFO: BL2: Loading image id 5INFO: ****start load_image***INFO: sd-mmc read done.WARNING: Firmware Image Package header check failed. id=0WARNING: Failed to obtain reference to image id=5 (-2)INFO: load_auth_image_internal: -2ERROR: BL2: Failed to load image id 5 (-2)Authentication failure
页:
[1]