菜鸟下载运行第一个裸板程序跑马灯led出错，求指点

albert4278

向2440里面烧写裸板程序，led灯轮流点亮的那个，使用AXD做为编译环境。没有用它作为load image和debug工具，我暂时还没有JTAG.
源码参见“开发板配套教程”里面的2.8.2 使用ADS创建工程中的例子，init.s,main.c
几个参数都详细对照过了，比如ROBASE=0X32000000 IMAGE ENTRY=0X32000000等。
dnw的usb下载地址为0x30800000

编译跑马灯程序后生成image文件 2440led.bin。

启动板子，选择menu下的[1]download to flash,进入子菜单：
选择 3  offset .......[my app]
再按照要求的usb port->transmit 选择要烧写的bin文件2440led.bin

界面提示下载成功。进入selectmenu

然后我选择3 boot my app
打印如下，最后启动不起来，进入了linux kernel
+------------------------------------------------------------+
| [0] Download & Run                                         |
| [1] Download to flash                                      |
| [2] Download From UART                                     |
| [3] Boot My Application                                    |
| [4] Boot Linux                                             |
| [5] Boot Wince                                             |
| [6] Erase Flash Partition                                  |
| [7] Config parameters                                      |
+------------------------------------------------------------+
NAND ID is 0xecda

Please select which region to write : Esc to abort
0 : offset 0x00000000, size 0x00020000 [boot]
1 : offset 0x00020000, size 0x00060000 [bootParam]
2 : offset 0x00080000, size 0x00100000 [pic]
3 : offset 0x00180000, size 0x00380000 [MyApp]
4 : offset 0x00500000, size 0x00300000 [kernel]
5 : offset 0x00800000, size 0x03c00000 [fs_yaffs]
6 : offset 0x04400000, size 0x00080000 [eboot]
7 : offset 0x04480000, size 0x03b80000 [wince]

Now download and write nand flash part [ MyApp ]
press [USB Port-->transmit] to choose the file

Now, Downloading [ADDRESS:30800000h,TOTAL:478]
RECEIVED FILE SIZE:     478
( 72.3KB/S,0.0S)
Now, Checksum calculation
Download O.K.

Now write nand flash page 0x300 from ram address 0x30800000, filesize = 478
.Program nand flash partition success

+------------------------------------------------------------+
|                     Select Menu                            |
+------------------------------------------------------------+
| [0] Download & Run                                         |
| [1] Download to flash                                      |
| [2] Download From UART                                     |
| [3] Boot My Application                                    |
| [4] Boot Linux                                             |
| [5] Boot Wince                                             |
| [6] Erase Flash Partition                                  |
| [7] Config parameters                                      |
+------------------------------------------------------------+
NAND ID is 0xecda
Memory Test(30200000h-33ff0000h):O.K.
Load Application...
run 0x32000000...
NAND ID is 0xecda
Set boot params = root=/dev/mtdblock3 init=/linuxrc load_ramdisk=0 console=ttySAC0,115200 mem=65536K devfs=mount display=sam320
Load Kernel...
Uncompressing Linux................................................................................................................. done, booting the kernel.
Linux version 2.6.12-h1940 (root@localhost.localdomain) (gcc version 3.4.1) #428 Fri Jan 29 16:49:06 CST 2010

CPU: ARM920Tid(wb) [41129200] revision 0 (ARMv4T)

CPU0: D VIVT write-back cache

CPU0: I cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets

CPU0: D cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets

Machine: SMDK2410

ATAG_INITRD is deprecated; please update your bootloader.

Memory policy: ECC disabled, Data cache writeback

CPU S3C2440A (id 0x32440001)

S3C2440: core 400.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz

S3C2410 Clocks, (c) 2004 Simtec Electronics

Built 1 zonelists

Kernel command line: root=/dev/mtdblock3 init=/linuxrc load_ramdisk=0 console=ttySAC0,115200 mem=65536K devfs=mount display=sam320

irq: clearing pending ext status 000d0000

irq: clearing subpending status 00000093

irq: clearing subpending status 00000092

PID hash table entries: 512 (order: 9, 8192 bytes)

timer tcon=00500d00, tcnt a2c1, tcfg 0000020f,00000030, usec 00001eb8

Console: colour dummy device 80x30

Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)

Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)

Memory: 64MB = 64MB total

Memory: 60800KB available (2936K code, 920K data, 112K init)

Mount-cache hash table entries: 512

CPU: Testing write buffer coherency: ok

NET: Registered protocol family 16

S3C2440: Initialising architecture

S3C2440: IRQ Support

S3C2440: Clock Support, UPLL 96.000 MHz

SCSI subsystem initialized

usbcore: registered new driver usbfs

usbcore: registered new driver hub

Bluetooth: Core ver 2.7

NET: Registered protocol family 31

Bluetooth: HCI device and connection manager initialized

Bluetooth: HCI socket layer initialized

S3C2410 DMA Driver, (c) 2003-2004 Simtec Electronics

DMA channel 0 at c4800000, irq 33

DMA channel 1 at c4800040, irq 34

DMA channel 2 at c4800080, irq 35

DMA channel 3 at c48000c0, irq 36

NetWinder Floating Point Emulator V0.97 (double precision)

devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

NTFS driver 2.1.22 [Flags: R/W].

JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.

yaffs Nov  4 2008 17:54:45 Installing.

Initializing Cryptographic API

--- s3c2410fb init ---!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

pxafb_probe start!!!!!!!!!!!!!!!!!!!!!!!!!!

VA=0xc4880000, PA=0x305c0000, size=0x00027000

Console: switching to colour frame buffer device 40x15

success to register framebuffer device: 0!!!

enable_irq(32) unbalanced from c001729c

done probe!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

fb1: Virtual frame buffer device, using 1024K of video memory

in s3c2410ts init()

success get major number!!!!!!

s3c2410-ts device driver MAJOR:253

success to get adc clock source!

base_addr = 0xc4860000

line 543 passed!

register s3c2410-ts driver success, return code is 0

S3C2410 RTC, (c) 2004 Simtec Electronics

我是新手，目前以我有限的知识感到难以定位，求高手解答
附件是2440_led的AXD工程源码等。
我的邮箱albert4278@gmail.com

飞凌-alexlee

嘿嘿，先看test的源码～

就是开机跑的那个app测试