OK6410烧写问题（SD卡）

小瓶盖儿~~

烧写后启动白屏，烧写时DNW显示如下，不知为什么
Welcome! This tool just for TE/OK6410
+OALArgsInit()
SocID:0x36410101
Arguments area is initialized
-OALArgsInit()
INFO: (unsigned)C_IsrHandler : 0x800668C4
INFO: (unsigned)ASM_IsrHandler : 0x80069F80
INFO: (unsigned)pISR : 0xEA01A7D8
HSMMC init
[HSMMC1] Setting registers for the EPLL (for SDCLK) : SYSCon.
[HSMMC0] Setting registers for the GPIO.
[HSMMC1] Setting registers for the EPLL : HSMMCCon.

CardSize: 510132224
[HSMMCLIB:INF] ClockConfig() Card Working Frequency = 24MHz
BP_Init
[FMD] ++FMD_Init() ****
[FMD:INF] FMD_Init() : Read ID = 0x0000ecd7
[FMD:ERR] FMD_Init() : Unknown ID = 0x0000ecd7
WARNING: OEMPlatformInit failed to initialize Boot Media.
[FMD] FMD_GetInfo() : NUMBLOCKS = 0(0x0), SECTORSPERBLOCK = 0(0x0), BYTESPERSECTOR = 0(0x0)
wNUM_BLOCKS : 0(0x0)
TOC_Read ERROR: no boot media
TOC_Init: dwEntry:1, dwImageType: 0x2, dwImageStart: 0x0, dwImageLength: 0x0, dwLaunchAddr: 0x0
+BootConfigInit
-BootConfigInit
TOC {
dwSignature: 0x434F544E
BootCfg {
  ConfigFlags: 0x10020
  BootDelay: 0x2
  ImageIndex: 1
  IP: 0.0.0.0
  MAC Address: 00:00:00:00:00:00
  Port: 0.0.0.0
  SubnetMask: 255.255.255.0
}
ID[0] {
  dwVersion: 0x20004
  dwSignature: 0x45424F54
  String: 'eboot.nb0'
  dwImageType: 0x2
  dwTtlSectors: 0x400
  dwLoadAddress: 0x80030000
  dwJumpAddress: 0x80030000
  dwStoreOffset: 0x0
  sgList[0].dwSector: 0x40
  sgList[0].dwLength: 0x400
}
ID[1] {
  dwVersion: 0x1
  dwSignature: 0x43465348
  String: ''
  dwImageType: 0x2
  dwTtlSectors: 0x0
  dwLoadAddress: 0x0
  dwJumpAddress: 0x0
  dwStoreOffset: 0x0
}
chainInfo.dwLoadAddress: 0X00000000
chainInfo.dwFlashAddress: 0X00000000
chainInfo.dwLength: 0X00000000
}
[Eboot] ++InitializeDisplay()
[Eboot] --InitializeDisplay()
Press [ENTER] to download image stored on boot media, or [SPACE] to enter boot monitor.

Initiating image download in 0 seconds.

Starting auto-download ...
Erase  the block '0..3'
System ready!
Preparing for download...
IsCardInserted
f_mount return = 0x0
FileInfo.fsize = 0x2000
FileInfo.fsize = 0x2000
FileInfo.fsize = 0x2000
g_pDownPt = 0xA300211B

BL_IMAGE_TYPE_MANIFEST


BL_IMAGE_TYPE_UNKNOWN


Download BIN file information:
-----------------------------------------------------
[0]: Base Address=0x0  Length=0x2000
-----------------------------------------------------
Stepldr image
ImageStart = 0x0, ImageLength = 0x2000, LaunchAddr = 0x0

Completed file(s):
-------------------------------------------------------------------------------
[0]: Address=0x0  Length=0x2000  Name="stepldr.nb0" Target=RAM
BP_Init  iSighForSlcMlc = 1
[FMD] ++FMD_Init() ****
[FMD:INF] FMD_Init() : Read ID = 0x0000ecd7
[FMD:ERR] FMD_Init() : Unknown ID = 0x0000ecd7
WARNING: OEMPlatformInit failed to initialize Boot Media.
ERROR: WriteRawImageToBootMedia: device doesn't exist.
ERROR: OEMLaunch: Failed to store image to Smart Media.
Success!
SpinForever...
这个烧写一直有两个错误，不懂，用其原带镜像文件也是

飞凌-路飞

清除坏块了吗？