iMX8MM烧录最新固件编译的rootfs.sdcard后启动不了

苏工

iMX8MM烧录最新固件编译的rootfs.sdcard后启动不了,始终卡在下面串口打印信息的这个位置。下载的是这个固件，没做任何修改就直接./build.sh full，求解
forlinx eep: 2022-06-20 ver 1
eep: now update emmc pins for bootrom
using eep parameter
DDRINFO: start DRAM init
DDRINFO: DRAM rate 4000MTS
DDRINFO:ddrphy calibration done
DDRINFO: ddrmix config done
Normal Boot
Trying to boot from BOOTROM
image offset 0x0, pagesize 0x200, ivt offset 0x0
NOTICE:  BL31: v2.2(release):rel_imx_5.4.70_2.3.0-0-gf1d7187f2
NOTICE:  BL31: Built : 03:31:00, Apr  8 2021
Forlinx

U-Boot 2020.04-00016-gc934c03999 (Apr 10 2023 - 05:59:11 +0000)

CPU:   i.MX8MP[8] rev1.1 1600 MHz (running at 1200 MHz)
CPU:   Industrial temperature grade (-40C to 105C) at 44C
Reset cause: POR
Model: Forlinx OK8MPlus LPDDR4 EVK board
DRAM:  4 GiB
MMC:   FSL_SDHC: 1, FSL_SDHC: 2
try kernel dtb
Error binding driver 'gpio_led': -22
Some drivers failed to bind
MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2

lvds0_panel enable
mipi_panel_uboot enable
eth0 enable
eth1 enable
Loading Environment from MMC... *** Warning - bad CRC, using default environment

video link is full

-Video Link 0 (1024 x 600)
        [0] lcd-controller@32e80000, video
        [1] mipi_dsi@32e60000, video_bridge
        [2] mipi_panel_uboot, panel

-Video Link 1 (1280 x 800)
        [0] lcd-controller@32e90000, video
        [1] ldb@32ec005c, video_bridge
        [2] lvds0_panel, panel
[ ]-Video Link 2
        [0] lcd-controller@32e90000, video
        [1] ldb@32ec005c, video_bridge
In:    serial
Out:   serial
Err:   serial

BuildInfo:
  - ATF f1d7187
  - U-Boot 2020.04-00016-gc934c03999

switch to partitions #0, OK
mmc2(part 0) is current device
secure check passed
board_late_init: Can't find device id=0x1a, on bus 2
flash target is MMC:2
Net:   config yt8521
eth0: ethernet@30be0000
Fastboot: Normal
Normal Boot
Autoboot in 1 seconds
switch to partitions #0, OK
mmc2(part 0) is current device
Booting from net ...
ethernet@30be0000 Waiting for PHY auto negotiation to complete... done
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5
BOOTP broadcast 6
BOOTP broadcast 7
BOOTP broadcast 8
BOOTP broadcast 9
BOOTP broadcast 10
BOOTP broadcast 11
BOOTP broadcast 12
BOOTP broadcast 13
BOOTP broadcast 14
BOOTP broadcast 15
BOOTP broadcast 16
BOOTP broadcast 17

Retry time exceeded; starting again
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5
BOOTP broadcast 6
BOOTP broadcast 7
BOOTP broadcast 8
BOOTP broadcast 9
BOOTP broadcast 10
BOOTP broadcast 11
BOOTP broadcast 12
BOOTP broadcast 13
BOOTP broadcast 14
BOOTP broadcast 15
BOOTP broadcast 16
BOOTP broadcast 17

Retry time exceeded; starting again
WARN: Cannot load the DT

-------------------------------------
1: shell
2: boot linux
3: Display select
0: reboot uboot
-------------------------------------

苏工

选择1了以后，输入这个
forlinx=> bootm
## Loading kernel from FIT Image at 43000000 ...
Bad FIT kernel image format!
ERROR: can't get kernel image!
forlinx=>