烧写Linux3.0.1 启动出现Kernel panic - not syncing: No init found.

cnlk

最新的手册在哪里下载？？？？？

飞凌-fatfish

http://bbs.witech.com.cn/thread-3809-1-1.html

sj_sk

iting data at 0x1933000 --  15痮mplete.
Writing data at 0x1a7a000 --  16痮mplete.
Writing data at 0x1bc2000 --  17痮mplete.
Bad block at 0x1c00000 in erase block from 0x1c00000 will be skipped


Writing data at 0x1d8a000 --  18痮mplete.
Bad block at 0x1e00000 in erase block from 0x1e00000 will be skipped


Writing data at 0x1f51000 --  19痮mplete.
Bad block at 0x2000000 in erase block from 0x2000000 will be skipped


Writing data at 0x2119000 --  20痮mplete.


TCP cubic registered
NET: Registered protocol family 17
can: controller area network core (rev 20090105 abi 8)
NET: Registered protocol family 29
can: raw protocol (rev 20090105)
can: broadcast manager protocol (rev 20090105 t)
lib80211: common routines for IEEE802.11 drivers
Registering the dns_resolver key type
s3c-rtc s3c64xx-rtc: setting system clock to 2000-02-10 04:12:32 UTC (950155952)
VFS: Mounted root (cramfs filesystem) readonly on device 31:2.
devtmpfs: mounted
Freeing init memory: 172K
cramfs: bad compressed blocksize 3301268142
cramfs: bad compressed blocksize 3301268142
/bin/sh: can't access tty; job control turned off
#
这咋回事啊？

飞凌-develop

楼上的朋友们，请整套使用我们的Linux3.0-2012-05版本，且确认您的开发板内存和NandFlash的大小，配套使用适合您内存，NandFlash大小的版本。
我们经过大量的测试，一键烧写如果正常，启动不会有问题的，如果您还未解决，请拨打我们的客服电话 0312-3119192

zhaoqinxve

kaitherin 发表于 2012-4-6 15:19
我用的是128M 内存 1G NandFlash开发板，烧写得瑟128M内存，256M NandFlash版本的，也出现下面的错误[] (du ...

求教问题解决方法