我买的板是4GB NAND FLASH ,256 MB DDR 为什么显示的只有 2GB 128MB

shiystone

****************************************

**    u-boot 1.1.6                    **

**    Updated for OK6410  TE6410 Board  **

**    Version (2012-09-23)          **

**    OEM: Forlinx Embedded           **

**    Web: http://www.witech.com.cn   **

****************************************


CPU:     S3C6410 @532MHz

         Fclk = 532MHz, Hclk = 133MHz, Pclk = 66MHz, Serial = CLKUART (SYNC Mode)

Board:   SMDK6410

DRAM:    128 MB

Flash:   0 kB

NandFlash Information:

Nandflash:ChipType= MLC  ChipName=samsung-K9LBG08U0D

No  No Calc pagesize, blocksize, erasesize,  use ids table .............

NandFlash:name=NAND 4GiB 1,8V 8-bit,id=d7, pagesize=4096 ,chipsize=2048 MB,erasesize=524288 oobsize=128

NandFlash Size is 2048 MB

SD/MMC:  SD 2.0 SDHC / Manufacturer: 0x02,OEM: "TM/SE08G",REV: 0.6,S/N: -874237129,DATE: 2013/7

         SDHC size: 7460 MiB

         Freq = 50MHz

In:      serial

Out:     lcd

Err:     lcd

Hit any key to stop autoboot:  0


NAND erase: device 0 whole chip

飞凌-unix

你使用的uboot和mmc错误了吧，你使用的是128的uboot和mmc文件