- 积分
- 118
贡献621
飞刀146 FD
注册时间2021-7-7
在线时间19 小时
|
楼主 |
发表于 2022-4-14 09:53:58
|
显示全部楼层
本帖最后由 generalj 于 2022-4-14 10:02 编辑
烧写的是自己修改过的镜像,不过只修改了串口和SPI的配置.
我是不接屏使用.
还有,这块核心板是返修板,加密芯片已根据后面升级的版本升了级的,下载的是最新的镜像.不知道跟这个有没有关系.
其他几块核心板同样的镜像,没有这个问题.
刚才试了一个超时久才启动:
[ 0.945272] gpio gpiochip1: (pio): created GPIO range 133->133 ==> pio PIN 133->133
[ 0.952898] gpio gpiochip1: (pio): created GPIO range 134->134 ==> pio PIN 134->134
[ 0.960525] gpio gpiochip1: (pio): created GPIO range 135->135 ==> pio PIN 135->135
[ 0.968158] gpio gpiochip1: (pio): created GPIO range 136->136 ==> pio PIN 136->136
[ 0.975779] gpio gpiochip1: (pio): created GPIO range 137->137 ==> pio PIN 137->137
[ 0.983405] gpio gpiochip1: (pio): created GPIO range 138->138 ==> pio PIN 138->138
[ 0.991032] gpio gpiochip1: (pio): created GPIO range 139->139 ==> pio PIN 139->139
[ 0.998659] gpio gpiochip1: (pio): created GPIO range 140->140 ==> pio PIN 140->140
[ 1.006285] gpio gpiochip1: (pio): created GPIO range 141->141 ==> pio PIN 141->141
[ 1.013912] gpio gpiochip1: (pio): created GPIO range 142->142 ==> pio PIN 142->142
[ 1.021539] gpio gpiochip1: (pio): created GPIO range 143->143 ==> pio PIN 143->143
[ 1.029165] gpio gpiochip1: (pio): created GPIO range 144->144 ==> pio PIN 144->144
[ 1.036792] gpio gpiochip1: (pio): created GPIO range 145->145 ==> pio PIN 145->145
[ 1.044418] gpio gpiochip1: (pio): created GPIO range 146->146 ==> pio PIN 146->146
[ 1.052045] gpio gpiochip1: (pio): created GPIO range 147->147 ==> pio PIN 147->147
[ 1.059672] gpio gpiochip1: (pio): created GPIO range 148->148 ==> pio PIN 148->148
[ 1.067298] gpio gpiochip1: (pio): created GPIO range 149->149 ==> pio PIN 149->149
[ 1.074925] gpio gpiochip1: (pio): created GPIO range 150->150 ==> pio PIN 150->150
[ 1.082552] gpio gpiochip1: (pio): created GPIO range 160->160 ==> pio PIN 160->160
[ 1.090178] gpio gpiochip1: (pio): created GPIO range 161->161 ==> pio PIN 161->161
[ 1.097805] gpio gpiochip1: (pio): created GPIO range 162->162 ==> pio PIN 162->162
[ 1.105432] gpio gpiochip1: (pio): created GPIO range 163->163 ==> pio PIN 163->163
[ 1.113058] gpio gpiochip1: (pio): created GPIO range 164->164 ==> pio PIN 164->164
[ 1.120685] gpio gpiochip1: (pio): created GPIO range 165->165 ==> pio PIN 165->165
[ 1.128315] gpio gpiochip1: (pio): created GPIO range 166->166 ==> pio PIN 166->166
[ 1.135939] gpio gpiochip1: (pio): created GPIO range 192->192 ==> pio PIN 192->192
[ 1.143565] gpio gpiochip1: (pio): created GPIO range 193->193 ==> pio PIN 193->193
[ 1.151192] gpio gpiochip1: (pio): created GPIO range 194->194 ==> pio PIN 194->194
[ 1.158818] gpio gpiochip1: (pio): created GPIO range 195->195 ==> pio PIN 195->195
[ 1.166445] gpio gpiochip1: (pio): created GPIO range 196->196 ==> pio PIN 196->196
[ 1.174072] gpio gpiochip1: (pio): created GPIO range 197->197 ==> pio PIN 197->197
[ 1.181698] gpio gpiochip1: (pio): created GPIO range 198->198 ==> pio PIN 198->198
[ 1.189325] gpio gpiochip1: (pio): created GPIO range 199->199 ==> pio PIN 199->199
[ 1.196952] gpio gpiochip1: (pio): created GPIO range 200->200 ==> pio PIN 200->200
[ 1.204579] gpio gpiochip1: (pio): created GPIO range 201->201 ==> pio PIN 201->201
[ 1.212205] gpio gpiochip1: (pio): created GPIO range 202->202 ==> pio PIN 202->202
[ 1.219832] gpio gpiochip1: (pio): created GPIO range 203->203 ==> pio PIN 203->203
[ 1.227459] gpio gpiochip1: (pio): created GPIO range 204->204 ==> pio PIN 204->204
[ 1.235085] gpio gpiochip1: (pio): created GPIO range 205->205 ==> pio PIN 205->205
[ 1.242712] gpio gpiochip1: (pio): created GPIO range 206->206 ==> pio PIN 206->206
[ 1.250339] gpio gpiochip1: (pio): created GPIO range 207->207 ==> pio PIN 207->207
[ 1.257965] gpio gpiochip1: (pio): created GPIO range 208->208 ==> pio PIN 208->208
[ 1.265592] gpio gpiochip1: (pio): created GPIO range 209->209 ==> pio PIN 209->209
[ 1.273218] gpio gpiochip1: (pio): created GPIO range 210->210 ==> pio PIN 210->210
[ 1.280845] gpio gpiochip1: (pio): created GPIO range 211->211 ==> pio PIN 211->211
[ 1.288472] gpio gpiochip1: (pio): created GPIO range 224->224 ==> pio PIN 224->224
[ 1.296099] gpio gpiochip1: (pio): created GPIO range 225->225 ==> pio PIN 225->225
[ 1.303725] gpio gpiochip1: (pio): created GPIO range 226->226 ==> pio PIN 226->226
[ 1.311352] gpio gpiochip1: (pio): created GPIO range 227->227 ==> pio PIN 227->227
[ 1.318979] gpio gpiochip1: (pio): created GPIO range 228->228 ==> pio PIN 228->228
[ 1.326605] gpio gpiochip1: (pio): created GPIO range 229->229 ==> pio PIN 229->229
[ 1.334232] gpio gpiochip1: (pio): created GPIO range 230->230 ==> pio PIN 230->230
[ 1.341858] gpio gpiochip1: (pio): created GPIO range 231->231 ==> pio PIN 231->231
[ 1.349485] gpio gpiochip1: (pio): created GPIO range 232->232 ==> pio PIN 232->232
[ 1.357112] gpio gpiochip1: (pio): created GPIO range 233->233 ==> pio PIN 233->233
[ 1.364738] gpio gpiochip1: (pio): created GPIO range 234->234 ==> pio PIN 234->234
[ 1.372368] gpio gpiochip1: (pio): created GPIO range 256->256 ==> pio PIN 256->256
[ 1.379992] gpio gpiochip1: (pio): created GPIO range 257->257 ==> pio PIN 257->257
[ 1.387619] gpio gpiochip1: (pio): created GPIO range 258->258 ==> pio PIN 258->258
[ 1.395245] gpio gpiochip1: (pio): created GPIO range 259->259 ==> pio PIN 259->259
[ 1.402872] gpio gpiochip1: (pio): created GPIO range 260->260 ==> pio PIN 260->260
[ 1.410499] gpio gpiochip1: (pio): created GPIO range 261->261 ==> pio PIN 261->261
[ 1.418126] gpio gpiochip1: (pio): created GPIO range 262->262 ==> pio PIN 262->262
[ 1.425752] gpio gpiochip1: (pio): created GPIO range 263->263 ==> pio PIN 263->263
[ 1.433379] gpio gpiochip1: (pio): created GPIO range 264->264 ==> pio PIN 264->264
[ 1.441005] gpio gpiochip1: (pio): created GPIO range 265->265 ==> pio PIN 265->265
[ 1.448632] gpio gpiochip1: (pio): created GPIO range 266->266 ==> pio PIN 266->266
[ 1.456259] gpio gpiochip1: (pio): created GPIO range 267->267 ==> pio PIN 267->267
[ 1.463885] gpio gpiochip1: (pio): created GPIO range 268->268 ==> pio PIN 268->268
[ 1.471512] gpio gpiochip1: (pio): created GPIO range 269->269 ==> pio PIN 269->269
[ 1.479139] gpio gpiochip1: (pio): created GPIO range 270->270 ==> pio PIN 270->270
[ 1.486765] gpio gpiochip1: (pio): created GPIO range 271->271 ==> pio PIN 271->271
[ 1.494392] gpio gpiochip1: (pio): created GPIO range 272->272 ==> pio PIN 272->272
[ 1.514630] sun50iw9p1-pinctrl pio: initialized sunXi PIO driver
[ 1.519780] iommu: Adding device 1c0e000.ve to group 0
[ 1.520447] iommu: Adding device 1c00000.vp9 to group 0
[ 1.535484] iommu: Adding device 1000000.disp to group 0
[ 1.537435] iommu: Adding device 1480000.g2d to group 0
[ 1.541575] iommu: Adding device csi0 to group 0
[ 1.542277] iommu: Adding device csi1 to group 0
[ 1.543844] iommu: Adding device 6600800.vind:scaler@0 to group 0
[ 1.544410] iommu: Adding device 6600800.vind:scaler@1 to group 0
[ 1.550602] iommu: Adding device 6600800.vind:scaler@2 to group 0
[ 1.556670] iommu: Adding device 6600800.vind:scaler@3 to group 0
[ 1.562747] iommu: Adding device 6600800.vind:scaler@4 to group 0
[ 1.568848] iommu: Adding device 6600800.vind:scaler@5 to group 0
[ 1.575639] iommu: Adding device vinc0 to group 0
[ 1.579780] iommu: Adding device vinc2 to group 0
[ 1.585693] iommu: Adding device 1420000.deinterlace to group 0
[ 1.619239] pwm module init!
[ 1.624887] sunxi-pm debug v3.10
[ 1.625607] of_get_named_gpiod_flags: parsed 'gpio' property of node '/lvds-power[0]' - status (0)
[ 1.626367] of_get_named_gpiod_flags: parsed 'gpio' property of node '/otg-vbus[0]' - status (0)
[ 1.626862] of_get_named_gpiod_flags: parsed 'gpio' property of node '/4g-rst[0]' - status (0)
[ 1.633467] SCSI subsystem initialized
[ 1.637005] sunxi_spi_probe()2299 - [spi1] SPI MASTER MODE
[ 1.641439] sunxi_spi_request_gpio()1927 - [spi1] Pinctrl init spi1
[ 1.647692] sunxi_spi_clk_init()1977 - [spi1] mclk 100000000
[ 1.653725] spi spi1: master is unqueued, this is deprecated
[ 1.659200] sunxi_spi_probe()2380 - [spi1]: driver probe succeed, base ffffff8008064000, irq 295
[ 1.668428] usbcore: registered new inte**ce driver usbfs
[ 1.673163] usbcore: registered new inte**ce driver hub
[ 1.678468] usbcore: registered new device driver usb
[ 1.683599] sunxi_i2c_adap_init()2553 - init
[ 1.688288] sunxi_i2c_probe()2301 - [i2c3] twi_drv_used = 0
[ 1.693159] sunxi_i2c_probe()2305 - [i2c3] twi_pkt_interval = 0
[ 1.699044] twi3 supply twi not found, using dummy regulator
[ 1.704751] twi_request_gpio()455 - [i2c3] dev name: twi3
[ 1.711251] 3-0022 supply vcc not found, using dummy regulator
[ 1.717305] gpiochip_find_base: found new base at 488
[ 1.720893] gpio gpiochip2: (tca6424): added GPIO chardev (254:2)
[ 1.727374] gpiochip_setup_dev: registered GPIOs 488 to 511 on device: gpiochip2 (tca6424)
[ 1.738212] sunxi_i2c_probe()2301 - [i2c4] twi_drv_used = 0
[ 1.740770] sunxi_i2c_probe()2305 - [i2c4] twi_pkt_interval = 0
[ 1.746625] twi4 supply twi not found, using dummy regulator
[ 1.752332] twi_request_gpio()455 - [i2c4] dev name: twi4
[ 1.758861] sunxi_i2c_probe()2301 - [i2c5] twi_drv_used = 0
[ 1.763192] sunxi_i2c_probe()2305 - [i2c5] twi_pkt_interval = 0
[ 1.769069] twi5 supply twi not found, using dummy regulator
[ 1.774784] twi_request_gpio()455 - [i2c5] dev name: twi5
[ 1.780907] axp20x-i2c 5-0036: AXP20x variant AXP858 found
[ 1.789362] axp2101-regulator axp2101-regulator.0: Setting DCDC frequency for unsupported AXP variant
[ 1.794741] axp2101-regulator axp2101-regulator.0: Error setting dcdc frequency: -22
[ 1.817473] random: fast init done
[ 1.846331] axp20x-i2c 5-0036: AXP20X driver loaded
[ 1.847026] media: Linux media inte**ce: v0.10
[ 1.847139] Linux video capture inte**ce: v2.00
[ 1.848274] ion_parse_dt_heap_common: id 0 type 0 name sys_user align 1000
[ 1.848615] ion_parse_dt_heap_common: id 4 type 4 name cma align 1000
[ 1.851592] ion_parse_dt_heap_common: id 6 type 6 name secure align 1000
[ 1.858416] ion_heap_create: Invalid heap type 6
[ 1.863203] Advanced Linux Sound Architecture Driver Initialized.
[ 1.869574] Bluetooth: Core ver 2.22
[ 1.872332] NET: Registered protocol family 31
[ 1.876639] Bluetooth: HCI device and connection manager initialized
[ 1.882968] Bluetooth: HCI socket layer initialized
[ 1.887811] Bluetooth: L2CAP socket layer initialized
[ 1.892875] Bluetooth: SCO socket layer initialized
[ 1.898719] [DISP]disp_module_init
[ 1.902554] [DISP] parser_disp_init_para,line:1293:
[ 1.905755] ===YTR==init_para->disp_mode=3,func=parser_disp_init_para
[ 1.912428] [DISP] disp_init,line:2520:
[ 1.915963] smooth display disp_mode 3 screen:0 type:1 mode:4
[ 1.923042] of_get_named_gpiod_flags: parsed 'lcd_bl_en' property of node '/soc@03000000/lcd0@01c0c000[0]' - status (0)
[ 1.934533] of_get_named_gpiod_flags: can't parse 'lcd_gpio_0' property of node '/soc@03000000/lcd0@01c0c000[0]'
[ 1.943073] of_get_named_gpiod_flags: can't parse 'lcd_gpio_1' property of node '/soc@03000000/lcd0@01c0c000[0]'
[ 1.953167] of_get_named_gpiod_flags: can't parse 'lcd_gpio_2' property of node '/soc@03000000/lcd0@01c0c000[0]'
[ 1.963345] of_get_named_gpiod_flags: can't parse 'lcd_gpio_3' property of node '/soc@03000000/lcd0@01c0c000[0]'
[ 1.973445] of_get_named_gpiod_flags: can't parse 'lcd_gpio_4' property of node '/soc@03000000/lcd0@01c0c000[0]'
[ 1.983622] of_get_named_gpiod_flags: can't parse 'lcd_gpio_5' property of node '/soc@03000000/lcd0@01c0c000[0]'
[ 1.993723] of_get_named_gpiod_flags: can't parse 'lcd_gpio_scl' property of node '/soc@03000000/lcd0@01c0c000[0]'
[ 2.004020] of_get_named_gpiod_flags: can't parse 'lcd_gpio_sda' property of node '/soc@03000000/lcd0@01c0c000[0]'
[ 2.046547] [DISP] config_fb_by_screen,line:2747:
[ 2.046596] config_fb_by_screen fb[0] res[1024x600],size in mm[1024x600]
[ 2.050125] [DISP] bind_fb_to_screen,line:2768:
[ 2.050168] fb-->scr 0->0,fb_mode=0,addr=0xff800000
[ 2.050217] [DISP] config_fb_create_info_by_screen,line:2713:
[ 2.050557] config_fb_create_info_by_screen buf:2,fb_mode:3,[1024x600],output[1024x600]
[ 2.060697] [DISP] bind_fb_to_screen,line:2909:
[ 2.063082] bind_fb_to_screen fb[0],size[1024x600],crop(0:0)[1024x600],screen[1024x600]
[ 2.071695] [DISP] config_fb_by_screen,line:2747:
[ 2.075707] config_fb_by_screen fb[1] res[1280x720],size in mm[1280x720]
[ 2.087436] [DISP] bind_fb_to_screen,line:2768:
[ 2.087477] fb-->scr 1->1,fb_mode=0,addr=0xff000000
[ 2.091910] [DISP] config_fb_create_info_by_screen,line:2713:
[ 2.097454] config_fb_create_info_by_screen buf:2,fb_mode:3,[1280x720],output[1280x720]
[ 2.108497] [DISP] bind_fb_to_screen,line:2909:
[ 2.109965] bind_fb_to_screen fb[1],size[1280x720],crop(0:0)[1280x720],screen[1280x720]
[ 2.118792] [DISP] config_fb_by_screen,line:2747:
[ 2.122608] config_fb_by_screen fb[2] res[1024x600],size in mm[1024x600]
[ 2.132829] [DISP] bind_fb_to_screen,line:2768:
[ 2.133757] fb-->scr 2->0,fb_mode=0,addr=0xfe800000
[ 2.138794] [DISP] config_fb_create_info_by_screen,line:2713:
[ 2.144340] config_fb_create_info_by_screen buf:2,fb_mode:3,[1024x600],output[1024x600]
[ 2.152490] [DISP] bind_fb_to_screen,line:2909:
[ 2.156822] bind_fb_to_screen fb[2],size[1024x600],crop(0:0)[1024x600],screen[1024x600]
[ 2.167276] [DISP]disp_module_init finish
[ 2.169710] HDMI 2.0 driver init start!
[ 2.172798] boot_hdmi=true
[ 2.175501] ERROR: can not get hdmi_cts_compatibility
[ 2.181201] Can not find the node of esm
[ 2.184398] ERROR: pinctrl_get for HDMI2.0 DDC fail
[ 2.189364] Get hdmi_power0:bldo1
[ 2.194833] hdmi_cec_init
[ 2.196258] HDMI2.0 module init end
[ 2.528613] [DISP] disp_sys_power_enable,line:486:
[ 2.528662] some error happen, fail to get regulator dc1sw
[ 2.529605] [DISP] disp_device_attached,line:174:
[ 2.529650] attached ok, mgr1<-->device0, type=4
[ 2.529702] [HDMI receive params]: tv mode: 0x5 format:0x0 data bits:0x0 eotf:0x4 cs:0x101 dvi_hdmi:2 range:2 scan:0 aspect_ratio:8
[ 2.537693] [DISP] disp_hdmi_set_mode,line:648:
[ 2.542003] hdmi_set_mode is null!
[ 2.551871] =====YTR====sensor_probe
[ 2.552993] [VIN_WARN]cci get clk failed!
[ 2.553482] [VIN_WARN]cci get clk failed!
[ 2.557915] [VIN_WARN]sensor_helper_probe: cannot get sensor0_cameravdd supply, setting it to NULL!
[ 2.566918] [VIN_WARN]sensor_helper_probe: cannot get sensor0_avdd supply, setting it to NULL!
[ 2.574727] [VIN_WARN]sensor_helper_probe: cannot get sensor0_dvdd supply, setting it to NULL!
[ 2.583410] [VIN_WARN]sensor_helper_probe: cannot get sensor1_cameravdd supply, setting it to NULL!
[ 2.592938] [VIN_WARN]sensor_helper_probe: cannot get sensor1_avdd supply, setting it to NULL!
[ 2.600893] [VIN_WARN]sensor_helper_probe: cannot get sensor1_dvdd supply, setting it to NULL!
[ 2.616611] of_get_named_gpiod_flags: can't parse 'sensor0_power_en' property of node '/soc@03000000/vind@0/sensor@0[0]'
[ 2.620368] of_get_named_gpiod_flags: parsed 'sensor0_reset' property of node '/soc@03000000/vind@0/sensor@0[0]' - status (0)
[ 2.631614] of_get_named_gpiod_flags: parsed 'sensor0_pwdn' property of node '/soc@03000000/vind@0/sensor@0[0]' - status (0)
[ 2.642730] of_get_named_gpiod_flags: can't parse 'sensor0_sm_hs' property of node '/soc@03000000/vind@0/sensor@0[0]'
[ 2.653304] of_get_named_gpiod_flags: can't parse 'sensor0_sm_vs' property of node '/soc@03000000/vind@0/sensor@0[0]'
[ 2.663930] of_get_named_gpiod_flags: can't parse 'sensor1_power_en' property of node '/soc@03000000/vind@0/sensor@1[0]'
[ 2.674791] of_get_named_gpiod_flags: parsed 'sensor1_reset' property of node '/soc@03000000/vind@0/sensor@1[0]' - status (0)
[ 2.686036] of_get_named_gpiod_flags: parsed 'sensor1_pwdn' property of node '/soc@03000000/vind@0/sensor@1[0]' - status (0)
[ 2.697167] of_get_named_gpiod_flags: can't parse 'sensor1_sm_hs' property of node '/soc@03000000/vind@0/sensor@1[0]'
[ 2.707718] of_get_named_gpiod_flags: can't parse 'sensor1_sm_vs' property of node '/soc@03000000/vind@0/sensor@1[0]'
[ 2.718412] gpio-0 (?): gpiod_request: status -16
[ 2.722964] gpio-0 (?): gpiod_request: status -16
[ 2.727650] gpio-0 (?): gpiod_request: status -16
[ 2.732923] [VIN_WARN]Get isp clk failed!
[ 2.736374] [VIN_WARN]Get mipi clk failed!
[ 2.793399] [VIN CCI_0 ERR] Status error at addr_8bit = 78, wr_flag = 1, val = 830
[ 2.793477] [ov5640_mipi] error, chip found is not an target chip.
[ 2.853578] [VIN CCI_1 ERR] Status error at addr_8bit = 78, wr_flag = 0, val = 7c110331
[ 2.853973] [VIN CCI_1 ERR] Status error at addr_8bit = 78, wr_flag = 0, val = 7c110331
[ 2.854361] [VIN CCI_1 ERR] Status error at addr_8bit = 78, wr_flag = 0, val = 7c110331
[ 2.855251] [VIN_DEV_CCI]ov5640_dvp sensor write retry = 2
[ 2.860773] [ov5640_dvp] error, chip found is not an target chip.
[ 2.878519] clocksource: Switched to clocksource arch_sys_counter
[ 2.945498] VFS: Disk quotas dquot_6.6.0
[ 2.945640] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.950217] thermal thermal_zone2: power_allocator: sustainable_power will be estimated
[ 2.950507] thermal thermal_zone3: power_allocator: sustainable_power will be estimated
[ 2.950884] NET: Registered protocol family 2
[ 2.965471] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 2.965667] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 2.968319] TCP: Hash tables configured (established 16384 bind 16384)
[ 2.974700] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 2.980600] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 2.987464] NET: Registered protocol family 1
[ 2.991598] Trying to unpack rootfs image as initramfs...
[ 3.158812] Freeing initrd memory: 2544K
[ 3.160518] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 3.162863] audit: initializing netlink subsys (disabled)
[ 3.162995] audit: type=2000 audit(2.383:1): initialized
[ 3.164327] workingset: timestamp_bits=45 max_order=19 bucket_order=0
[ 3.177645] Registering sdcardfs 0.1
[ 3.178270] ntfs: driver 2.1.32 [Flags: R/W].
[ 3.178927] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 3.179854] fuse init (API version 7.26)
[ 3.190345] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 3.190476] io scheduler noop registered
[ 3.194410] io scheduler deadline registered
[ 3.198979] io scheduler cfq registered (default)
[ 3.207651] =======YTR=== .228091] console [ttyS0] enabled
[ 3.228091] console [ttyS0] enabled
[ 3.232059] bootconsole [earlycon0] disabled
[ 3.232059] bootconsole [earlycon0] disabled
[ 3.241436] uart uart1: get regulator failed
[ 3.249637] uart1: ttyS1 at MMIO 0x5000400 (irq = 281, base_baud = 1500000) is a SUNXI
[ 3.259531] uart uart5: get regulator failed
[ 3.264669] uart5: ttyS5 at MMIO 0x5001400 (irq = 282, base_baud = 1500000) is a SUNXI
[ 3.274987] misc dump reg init
[ 3.279926] deinterlace 1420000.deinterlace: version[1.0.0], ip=0x300100
[ 3.289332] G2D: Module initialized.major:243
[ 3.294445] Unable to detect cache hierarchy for CPU 0
[ 3.317985] brd: module loaded
[ 3.331319] loop: module loaded
[ 3.336276] zram: Added device: zram0
[ 3.341379] Boot type 2
[ 3.344888] sunxi-bt soc@03000000:bt: Missing bt_power.
[ 3.350938] sunxi-bt soc@03000000:bt: bt_power_name ((null))
[ 3.357345] sunxi-bt soc@03000000:bt: Missing bt_io_regulator.
[ 3.363923] sunxi-bt soc@03000000:bt: io_regulator_name ((null))
[ 3.370889] of_get_named_gpiod_flags: parsed 'bt_rst_n' property of node '/soc@03000000/bt[0]' - status (0)
[ 3.382655] sunxi-bt soc@03000000:bt: devm_pinctrl_get() failed!
[ 3.391553] [ADDR_MGT] addr_mgt_probe: success.
[ 3.401387] spidev spi1.0: buggy DT: spidev listed directly in DT
[ 3.408342] ------------[ cut here ]------------
[ 3.413554] WARNING: CPU: 0 PID: 1 at drivers/spi/spidev.c:757 spidev_probe+0x194/0x1d4
[ 3.422555] Modules linked in:
[ 3.425995]
[ 3.427673] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.9.170 #2
[ 3.434427] Hardware name: sun50iw9 (DT)
[ 3.438837] task: ffffffc07c980000 task.stack: ffffffc07c988000
[ 3.445496] PC is at spidev_probe+0x194/0x1d4
[ 3.450396] LR is at spidev_probe+0x68/0x1d4
[ 3.455197] pc : [<ffffff8008597568>] lr : [<ffffff800859743c>] pstate: 80400045
[ 3.463514] sp : ffffffc07c98bb90
[ 3.467238] x29: ffffffc07c98bb90 x28: 0000000000000000
[ 3.473225] x27: ffffff8008ee2b78 x26: ffffff8008e8e790
[ 3.479212] x25: ffffff800945c000 x24: 00000000cabc9af5
[ 3.485199] x23: 0000000000000000 x22: ffffff80094bb000
[ 3.491185] x21: 0000000000000000 x20: ffffffc07b0b0800
[ 3.497172] x19: ffffff8008ad8cb0 x18: 000000000000000a
[ 3.503158] x17: 00000000a3014314 x16: 000000004e0811a1
[ 3.509145] x15: 0000000000061feb x14: ffffff8089461b7f
[ 3.515132] x13: ffffffffffffffff x12: 0000000000000030
[ 3.521118] x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f
[ 3.527105] x9 : feff756463686f72 x8 : ffffffffffffffff
[ 3.533092] x7 : fefefefefefefefe x6 : 0000000000008080
[ 3.539078] x5 : 0000000000000000 x4 : ffffffffffffffff
[ 3.545064] x3 : 0000766564697073 x2 : ffffffffffffffff
[ 3.551051] x1 : 0000000000000000 x0 : 0000000000000000
[ 3.557039]
[ 3.557039] SP: 0xffffffc07c98bb10:
[ 3.562622] bb10 094bb000 ffffff80 00000000 00000000 cabc9af5 00000000 0945c000 ffffff80
[ 3.571896] bb30 08e8e790 ffffff80 08ee2b78 ffffff80 00000000 00000000 7c98bb90 ffffffc0
[ 3.581165] bb50 0859743c ffffff80 7c98bb90 ffffffc0 08597568 ffffff80 80400045 00000000
[ 3.590433] bb70 7c98bb90 ffffffc0 0859743c ffffff80 ffffffff ffffffff 7b0b0800 ffffffc0
[ 3.599702] bb90 7c98bbe0 ffffffc0 08593d1c ffffff80 7b0b0800 ffffffc0 093432a0 ffffff80
[ 3.608971] bbb0 00000000 00000000 094bb000 ffffff80 00000000 00000000 cabc9af5 00000000
[ 3.618239] bbd0 0945c000 ffffff80 08593d08 ffffff80 7c98bc00 ffffffc0 08537dcc ffffff80
[ 3.627507] bbf0 7b0b0800 ffffffc0 093432c0 ffffff80 7c98bc40 ffffffc0 085380a0 ffffff80
[ 3.636787]
[ 3.636787] X20: 0xffffffc07b0b0780:
[ 3.642466] 0780 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 3.651735] 07a0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 3.661003] 07c0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 3.670270] 07e0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 3.679538] 0800 7b028000 ffffffc0 7b743f00 ffffffc0 7b7eba00 ffffffc0 7b07a898 ffffffc0
[ 3.688807] 0820 7b028018 ffffffc0 7b028010 ffffffc0 7ca36c80 ffffffc0 09334bb8 ffffff80
[ 3.698076] 0840 7b7ece10 ffffffc0 00000003 00000007 00000000 00000000 00000000 00000000
[ 3.707344] 0860 00000000 00030003 7b0b0868 ffffffc0 7b0b0868 ffffffc0 7c980000 ffffffc0
[ 3.716618]
[ 3.716618] X29: 0xffffffc07c98bb10:
[ 3.722298] bb10 094bb000 ffffff80 00000000 00000000 cabc9af5 00000000 0945c000 ffffff80
[ 3.731567] bb30 08e8e790 ffffff80 08ee2b78 ffffff80 00000000 00000000 7c98bb90 ffffffc0
[ 3.740835] bb50 0859743c ffffff80 7c98bb90 ffffffc0 08597568 ffffff80 80400045 00000000
[ 3.750104] bb70 7c98bb90 ffffffc0 0859743c ffffff80 ffffffff ffffffff 7b0b0800 ffffffc0
[ 3.759372] bb90 7c98bbe0 ffffffc0 08593d1c ffffff80 7b0b0800 ffffffc0 093432a0 ffffff80
[ 3.768640] bbb0 00000000 00000000 094bb000 ffffff80 00000000 00000000 cabc9af5 00000000
[ 3.777908] bbd0 0945c000 ffffff80 08593d08 ffffff80 7c98bc00 ffffffc0 08537dcc ffffff80
[ 3.787176] bbf0 7b0b0800 ffffffc0 093432c0 ffffff80 7c98bc40 ffffffc0 085380a0 ffffff80
[ 3.796445]
[ 3.798129] ---[ end trace e782a644c28181e5 ]---
[ 3.803321] Call trace:
[ 3.806072] Exception stack(0xffffffc07c98b980 to 0xffffffc07c98bab0)
[ 3.813318] b980: ffffff8008ad8cb0 0000007fffffffff 00000000414db000 ffffff8008597568
[ 3.822128] b9a0: 0000000080400045 000000000000003d ffffff800945c000 ffffff8008e8e790
[ 3.830938] b9c0: ffffff8008ee2b78 ffffffc07c98ba30 ffffffc07c98ba20 ffffff80087910e4
[ 3.839746] b9e0: ffffffc07c98ba20 ffffff80084400f4 ffffffc07c98bad8 ffffff8008ee4000
[ 3.848556] ba00: ffffff800808e10c ffffffc07c980000 ffffffc07c98bb20 ffffff800853330c
[ 3.857365] ba20: ffffffc07c98ba30 ffffff800808aca4 ffffffc07c98ba70 ffffff800808ae54
[ 3.866173] ba40: ffffffc07c98bad8 ffffffc07c980000 ffffff800808e10c 00000000000409aa
[ 3.874982] ba60: 0000000000000000 0000000000000000 ffffffffffffffff 0000766564697073
[ 3.883792] ba80: ffffffffffffffff 0000000000000000 0000000000008080 fefefefefefefefe
[ 3.892599] baa0: ffffffffffffffff feff756463686f72
[ 3.898087] [<ffffff8008597568>] spidev_probe+0x194/0x1d4
[ 3.904160] [<ffffff8008593d1c>] spi_drv_probe+0x88/0xb0
[ 3.910138] [<ffffff8008537dcc>] driver_probe_device+0x1dc/0x41c
[ 3.916895] [<ffffff80085380a0>] __driver_attach+0x94/0x108
[ 3.923165] [<ffffff8008535b70>] bus_for_each_dev+0x8c/0xcc
[ 3.929433] [<ffffff80085376ac>] driver_attach+0x30/0x3c
[ 3.935407] [<ffffff8008537070>] bus_add_driver+0xf8/0x248
[ 3.941577] [<ffffff8008538dfc>] driver_register+0x98/0xe4
[ 3.947747] [<ffffff8008593c30>] __spi_register_driver+0x6c/0x78
[ 3.954507] [<ffffff8008e65e04>] spidev_init+0x98/0xd0
[ 3.960289] [<ffffff8008083a30>] do_one_initcall+0xb4/0x164
[ 3.966559] [<ffffff8008e30d58>] kernel_init_freeable+0x138/0x1d8
[ 3.973416] [<ffffff8008a4343c>] kernel_init+0x18/0x10c
[ 3.979293] [<ffffff80080834f0>] ret_from_fork+0x10/0x20
[ 3.986406] libphy: Fixed MDIO Bus: probed
[ 3.991079] tun: Universal TUN/TAP device driver, 1.6
[ 3.996816] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 4.007186] gmac-power0 get success!
[ 4.011298] gmac-power1 get error!
[ 4.015179] gmac-power2 get error!
[ 4.019105] of_get_named_gpiod_flags: parsed 'phy-rst' property of node '/soc@03000000/eth@05020000[0]' - status (0)
[ 4.033258] gmac-power0 get success!
[ 4.037374] gmac-power1 get error!
[ 4.041255] gmac-power2 get error!
[ 4.045181] of_get_named_gpiod_flags: parsed 'phy-rst' property of node '/soc@03000000/eth@05030000[0]' - status (0)
[ 4.058174] PPP generic driver version 2.4.2
[ 4.063348] PPP BSD Compression module registered
[ 4.068673] PPP Deflate Compression module registered
[ 4.074398] PPP MPPE Compression module registered
[ 4.079805] NET: Registered protocol family 24
[ 4.084868] PPTP driver version 0.8.5
[ 4.089370] GobiNet: Quectel_WCDMA<E_Linux&Android_GobiNet_Driver_V1.3.8
[ 4.097254] usbcore: registered new inte**ce driver GobiNet
[ 4.103760] usbcore: registered new inte**ce driver r8152
[ 4.110105] usbcore: registered new inte**ce driver asix
[ 4.116315] usbcore: registered new inte**ce driver ax88179_178a
[ 4.123320] usbcore: registered new inte**ce driver cdc_ether
[ 4.129997] usbcore: registered new inte**ce driver net1080
[ 4.136506] usbcore: registered new inte**ce driver cdc_subset
[ 4.143296] usbcore: registered new inte**ce driver zaurus
[ 4.149713] usbcore: registered new inte**ce driver cdc_ncm
[ 4.156216] usbcore: registered new inte**ce driver huawei_cdc_ncm
[ 4.163303] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.171103] get drv_vbus is fail, 84
[ 4.175162] get ehci0-controller, regulator_io is no nocare
[ 4.181878] [sunxi-ehci0]: probe, pdev->name: 5101000.ehci0-controller, sunxi_ehci: 0xffffff80094c1970, 0x:ffffff800c261000, irq_no:11f
[ 4.195599] [sunxi-ehci0]: Not init ehci0
[ 4.200399] get drv_vbus is fail, 84
[ 4.204455] get ehci1-controller, regulator_io is no nocare
[ 4.211121] [sunxi-ehci1]: probe, pdev->name: 5200000.ehci1-controller, sunxi_ehci: 0xffffff80094c1cd8, 0x:ffffff800c265000, irq_no:121
[ 4.224911] 5200000.ehci1-controller supply drvvbus not found, using dummy regulator
[ 4.233785] sunxi-ehci 5200000.ehci1-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.244031] sunxi-ehci 5200000.ehci1-controller: new USB bus registered, assigned bus number 1
[ 4.254267] sunxi-ehci 5200000.ehci1-controller: irq 289, io mem 0xffffffc07b650010
[ 4.275207] sunxi-ehci 5200000.ehci1-controller: USB 0.0 started, EHCI 1.00
[ 4.284412] hub 1-0:1.0: USB hub found
[ 4.288782] hub 1-0:1.0: 1 port detected
[ 4.294063] get drv_vbus is fail, 84
[ 4.298117] get ehci2-controller, regulator_io is no nocare
[ 4.304921] [sunxi-ehci2]: probe, pdev->name: 5310000.ehci2-controller, sunxi_ehci: 0xffffff80094c2040, 0x:ffffff800c302000, irq_no:123
[ 4.318776] 5310000.ehci2-controller supply drvvbus not found, using dummy regulator
[ 4.327657] sunxi-ehci 5310000.ehci2-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.337946] sunxi-ehci 5310000.ehci2-controller: new USB bus registered, assigned bus number 2
[ 4.348013] sunxi-ehci 5310000.ehci2-controller: irq 291, io mem 0xffffffc07b650810
[ 4.368563] sunxi-ehci 5310000.ehci2-controller: USB 0.0 started, EHCI 1.00
[ 4.377619] hub 2-0:1.0: USB hub found
[ 4.381928] hub 2-0:1.0: 1 port detected
[ 4.387308] get drv_vbus is fail, 84
[ 4.391363] get ehci3-controller, regulator_io is no nocare
[ 4.399083] [sunxi-ehci3]: probe, pdev->name: 5311000.ehci3-controller, sunxi_ehci: 0xffffff80094c23a8, 0x:ffffff800c30c000, irq_no:125
[ 4.412926] 5311000.ehci3-controller supply drvvbus not found, using dummy regulator
[ 4.421894] sunxi-ehci 5311000.ehci3-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.432130] sunxi-ehci 5311000.ehci3-controller: new USB bus registered, assigned bus number 3
[ 4.442285] sunxi-ehci 5311000.ehci3-controller: irq 293, io mem 0xffffffc07b651010
[ 4.461882] sunxi-ehci 5311000.ehci3-controller: USB 0.0 started, EHCI 1.00
[ 4.471022] hub 3-0:1.0: USB hub found
[ 4.475327] hub 3-0:1.0: 1 port detected
[ 4.480983] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.488494] get drv_vbus is fail, 84
[ 4.492793] get ohci0-controller, regulator_io is no nocare
[ 4.499657] [sunxi-ohci0]: probe, pdev->name: 5101000.ohci0-controller, sunxi_ohci: 0xffffff80094c0bd0
[ 4.510190] [sunxi-ohci0]: Not init ohci0
[ 4.515031] get drv_vbus is fail, 84
[ 4.519115] get ohci1-controller, regulator_io is no nocare
[ 4.525900] [sunxi-ohci1]: probe, pdev->name: 5200000.ohci1-controller, sunxi_ohci: 0xffffff80094c0f38
[ 4.536516] 5200000.ohci1-controller supply drvvbus not found, using dummy regulator
[ 4.545444] sunxi-ohci 5200000.ohci1-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 4.555340] sunxi-ohci 5200000.ohci1-controller: new USB bus registered, assigned bus number 4
[ 4.565225] sunxi-ohci 5200000.ohci1-controller: irq 290, io mem 0xffffff8008ae35b8
[ 4.633767] hub 4-0:1.0: USB hub found
[ 4.638126] hub 4-0:1.0: 1 port detected
[ 4.643396] get drv_vbus is fail, 84
[ 4.647496] get ohci2-controller, regulator_io is no nocare
[ 4.654361] [sunxi-ohci2]: probe, pdev->name: 5310000.ohci2-controller, sunxi_ohci: 0xffffff80094c12a0
[ 4.664962] 5310000.ohci2-controller supply drvvbus not found, using dummy regulator
[ 4.673905] sunxi-ohci 5310000.ohci2-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 4.683789] sunxi-ohci 5310000.ohci2-controller: new USB bus registered, assigned bus number 5
[ 4.693635] sunxi-ohci 5310000.ohci2-controller: irq 292, io mem 0xffffff8008ae35b8
[ 4.763740] hub 5-0:1.0: USB hub found
[ 4.768088] hub 5-0:1.0: 1 port detected
[ 4.773356] get drv_vbus is fail, 84
[ 4.777445] get ohci3-controller, regulator_io is no nocare
[ 4.784299] [sunxi-ohci3]: probe, pdev->name: 5311000.ohci3-controller, sunxi_ohci: 0xffffff80094c1608
[ 4.794898] 5311000.ohci3-controller supply drvvbus not found, using dummy regulator
[ 4.803831] sunxi-ohci 5311000.ohci3-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 4.813717] sunxi-ohci 5311000.ohci3-controller: new USB bus registered, assigned bus number 6
[ 4.823570] sunxi-ohci 5311000.ohci3-controller: irq 294, io mem 0xffffff8008ae35b8
[ 4.893734] hub 6-0:1.0: USB hub found
[ 4.898044] hub 6-0:1.0: 1 port detected
[ 4.903859] usbcore: registered new inte**ce driver cdc_wdm
[ 4.910462] usbcore: registered new inte**ce driver uas
[ 4.916707] usbcore: registered new inte**ce driver usb-storage
[ 4.923637] usbcore: registered new inte**ce driver ums-alauda
[ 4.930496] usbcore: registered new inte**ce driver ums-cypress
[ 4.937423] usbcore: registered new inte**ce driver ums-datafab
[ 4.944366] usbcore: registered new inte**ce driver ums_eneub6250
[ 4.951500] usbcore: registered new inte**ce driver ums-freecom
[ 4.958460] usbcore: registered new inte**ce driver ums-isd200
[ 4.965274] usbcore: registered new inte**ce driver ums-jumpshot
[ 4.972295] usbcore: registered new inte**ce driver ums-karma
[ 4.979055] usbcore: registered new inte**ce driver ums-onetouch
[ 4.986086] usbcore: registered new inte**ce driver ums-realtek
[ 4.993036] usbcore: registered new inte**ce driver ums-sddr09
[ 4.999833] usbcore: registered new inte**ce driver ums-sddr55
[ 5.006949] usbcore: registered new inte**ce driver ums-usbat
[ 5.013754] usbcore: registered new inte**ce driver usbserial
[ 5.020539] usbcore: registered new inte**ce driver cdc_xr_usb_serial
[ 5.027954] xr_usb_serial_common: Exar USB UART (serial port) driver
[ 5.035302] usbcore: registered new inte**ce driver option
[ 5.041711] usbserial: USB Serial support registered for GSM modem (1-port)
[ 5.050087] usb_serial_number:20080411
[ 5.055522] sunxikbd_key_init: key0 vol= 210 code= 115
[ 5.061381] sunxikbd_key_init: key1 vol= 410 code= 114
[ 5.067188] sunxikbd_key_init: key2 vol= 590 code= 139
[ 5.073027] sunxikbd_key_init: key3 vol= 750 code= 28
[ 5.078739] sunxikbd_key_init: key4 vol= 880 code= 172
[ 5.084951] input: sunxi-keyboard as /devices/virtual/input/input0
[ 5.092828] usbcore: registered new inte**ce driver xpad
[ 5.099092] usbcore: registered new inte**ce driver usb_acecad
[ 5.105992] usbcore: registered new inte**ce driver aiptek
[ 5.112418] usbcore: registered new inte**ce driver gtco
[ 5.118690] usbcore: registered new inte**ce driver hanwang
[ 5.125276] usbcore: registered new inte**ce driver kbtab
[ 5.131581] <<-GTP-INFO->> GTP driver installing...
[ 5.137556] <<-GTP-INFO->> GTP Driver Version: V2.4<2014/11/28>
[ 5.144296] <<-GTP-INFO->> GTP I2C Address: 0x5d
[ 5.149647] of_get_named_gpiod_flags: parsed 'goodix,irq-gpio' property of node '/soc@03000000/twi@0x05003000/gt911_ts@5d[0]' - status (0)
[ 5.163743] of_get_named_gpiod_flags: parsed 'goodix,rst-gpio' property of node '/soc@03000000/twi@0x05003000/gt911_ts@5d[0]' - status (0)
[ 5.177878] 4-005d supply vdd_ana not found, using dummy regulator
[ 5.185025] 4-005d supply vcc_i2c not found, using dummy regulator
[ 5.192213] <<-GTP-INFO->> Guitar reset
[ 5.555195] hdmi_hpd_sys_config_release
[ 10.428530] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 15.548529] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 20.668541] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 25.788532] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 30.908541] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 30.916221] <<-GTP-ERROR->> I2C Write: 0x8041, 1 bytes failed, errcode: -62!
[ 36.028535] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 41.148533] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 46.268554] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 51.388540] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 56.511856] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 56.519544] <<-GTP-ERROR->> I2C Read: 0x8047, 1 bytes failed, errcode: -62! Process reset.
[ 56.528869] <<-GTP-INFO->> Guitar reset
[ 61.841860] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 66.965198] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 72.081863] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 77.201854] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 82.321861] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 82.329537] <<-GTP-ERROR->> I2C Write: 0x8041, 1 bytes failed, errcode: -62!
[ 82.337505] <<-GTP-ERROR->> GTP i2c test failed time 1.
[ 87.441856] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 92.561848] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 97.681849] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 102.801851] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 107.419429] random: crng init done
[ 107.921850] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 107.929546] <<-GTP-ERROR->> I2C Read: 0x8047, 1 bytes failed, errcode: -62! Process reset.
[ 107.938875] <<-GTP-INFO->> Guitar reset
[ 113.041855] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 118.161857] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 123.281853] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 128.401849] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 133.521848] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 133.529528] <<-GTP-ERROR->> I2C Write: 0x8041, 1 bytes failed, errcode: -62!
[ 133.537527] <<-GTP-ERROR->> GTP i2c test failed time 2.
[ 138.641848] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 143.761850] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 148.881836] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 154.001842] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 159.121840] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 159.129525] <<-GTP-ERROR->> I2C Read: 0x8047, 1 bytes failed, errcode: -62! Process reset.
[ 159.138879] <<-GTP-INFO->> Guitar reset
[ 164.241838] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 169.361840] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 174.481839] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 179.601842] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 184.721841] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 184.729526] <<-GTP-ERROR->> I2C Write: 0x8041, 1 bytes failed, errcode: -62!
[ 184.737501] <<-GTP-ERROR->> GTP i2c test failed time 3.
[ 189.841834] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 194.961833] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 200.081828] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 205.201831] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 210.321824] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 210.329545] <<-GTP-ERROR->> I2C Read: 0x8047, 1 bytes failed, errcode: -62! Process reset.
[ 210.338893] <<-GTP-INFO->> Guitar reset
[ 215.441827] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 220.565194] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 225.685172] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 230.801823] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 235.921822] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 235.929534] <<-GTP-ERROR->> I2C Write: 0x8041, 1 bytes failed, errcode: -62!
[ 235.937519] <<-GTP-ERROR->> GTP i2c test failed time 4.
[ 241.041831] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 246.161817] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 251.281821] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 256.401831] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 261.521823] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 261.529504] <<-GTP-ERROR->> I2C Read: 0x8047, 1 bytes failed, errcode: -62! Process reset.
[ 261.538862] <<-GTP-INFO->> Guitar reset
[ 266.641843] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 271.761819] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 276.881825] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 282.001818] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 287.121818] sunxi_i2c_do_xfer()1947 - [i2c4] xfer timeout (dev addr:0x5d)
[ 287.129502] <<-GTP-ERROR->> I2C Write: 0x8041, 1 bytes failed, errcode: -62!
[ 287.137518] <<-GTP-ERROR->> GTP i2c test failed time 5.
[ 287.158468] <<-GTP-ERROR->> I2C communication ERROR!
[ 287.164315] <<-GTP-INFO-928->> GTP driver installing...
[ 287.171262] axp2101_pek: Setting power key for unsupported AXP variant
[ 287.182237] input: axp2101-pek as /devices/platform/soc/twi5/i2c-5/5-0036/axp2101-pek.0/input/input1
[ 287.193301] sunxi_gpadc_init,1540, success
[ 287.198753] sunxi_gpadc_setup: get channel compare select failed
[ 287.205553] sunxi_gpadc_setup: get channel compare low data select failed
[ 287.213207] sunxi_gpadc_setup: get channel compare hig data select failed
[ 287.220875] sunxi_gpadc_setup:get channel0_compare_lowdata err!
[ 287.227549] sunxi_gpadc_setup:get channel0_compare_higdata err!
[ 287.234240] sunxi_gpadc_setup:get channel1_compare_lowdata err!
[ 287.240921] sunxi_gpadc_setup:get channel1_compare_higdata err!
[ 287.247600] sunxi_gpadc_setup:get channel2_compare_lowdata err!
[ 287.254279] sunxi_gpadc_setup:get channel2_compare_higdata err!
[ 287.260961] sunxi_gpadc_setup:get channel3_compare_lowdata err!
[ 287.267647] sunxi_gpadc_setup:get channel3_compare_higdata err!
[ 287.274639] input: sunxi-gpadc0 as /devices/virtual/input/input2
[ 287.281983] input: sunxi-gpadc1 as /devices/virtual/input/input3
[ 287.289314] input: sunxi-gpadc2 as /devices/virtual/input/input4
[ 287.296632] input: sunxi-gpadc3 as /devices/virtual/input/input5
[ 287.307065] rtc-rx8010 3-0032: Frequency stop was detected
[ 287.313903] rtc-rx8010 3-0032: Alarm was detected
[ 287.320673] rtc-rx8010 3-0032: Frequency stop detected
[ 287.326824] rtc-rx8010 3-0032: rtc core: registered rx8010 as rtc0
[ 287.334965] sunxi-rtc rtc: rtc core: registered sunxi-rtc as rtc1
[ 287.341954] sunxi-rtc rtc: RTC enabled
[ 287.346805] i2c /dev entries driver
[ 287.351888] IR NEC protocol handler initialized
[ 287.357007] IR RC5(x/sz) protocol handler initialized
[ 287.363395] sunxi_ir_startup: get ir protocol failed
[ 287.368944] 7040000.s_cir supply ir0 not found, using dummy regulator
[ 287.376603] Registered IR keymap rc_map_sunxi
[ 287.382035] input: sunxi-ir as /devices/platform/soc/7040000.s_cir/rc/rc0/input6
[ 287.390709] rc rc0: sunxi-ir as /devices/platform/soc/7040000.s_cir/rc/rc0
[ 287.400509] usbcore: registered new inte**ce driver uvcvideo
[ 287.407056] USB Video Class driver (1.1.1)
[ 287.411688] sunxi cedar version 0.1
[ 287.415860] VE: install start!!!
[ 287.415860]
[ 287.421467] cedar_ve: cedar-ve the get irq is 278
[ 287.427335] VE: get debugfs_mpp_root is NULL, please check mpp
[ 287.427335]
[ 287.435653] VE: sunxi ve debug register driver failed!
[ 287.435653]
[ 287.445709] sunxi-wdt 30090a0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[ 287.455848] device-mapper: uevent: version 1.0.3
[ 287.461682] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 287.471510] Bluetooth: HCI UART driver ver 2.3
[ 287.476551] Bluetooth: HCI UART protocol H4 registered
[ 287.482386] Bluetooth: HCI UART protocol LL registered
[ 287.488212] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 287.500376] sunxi-mmc sdc2: SD/MMC/SDIO Host Controller Driver(v3.44 2020-5-21 16:05-202006022045)
[ 287.510666] sunxi-mmc sdc2: ***ctl-spec-caps*** 8
[ 287.517364] sunxi-mmc sdc2: No vdmmc regulator found
[ 287.523015] sunxi-mmc sdc2: No vd33sw regulator found
[ 287.528774] sunxi-mmc sdc2: No vd18sw regulator found
[ 287.534518] sunxi-mmc sdc2: No vq33sw regulator found
[ 287.540229] sunxi-mmc sdc2: No vq18sw regulator found
[ 287.545969] of_get_named_gpiod_flags: can't parse 'card-pwr-gpios' property of node '/soc@03000000/sdmmc@04022000[0]'
[ 287.558851] sunxi-mmc sdc2: set host busy
[ 287.563467] sunxi-mmc sdc2: GPIO lookup for consumer wp
[ 287.569411] sunxi-mmc sdc2: using device tree for GPIO lookup
[ 287.575912] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc@03000000/sdmmc@04022000[0]'
[ 287.587336] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc@03000000/sdmmc@04022000[0]'
[ 287.598654] sunxi-mmc sdc2: using lookup tables for GPIO lookup
[ 287.605381] sunxi-mmc sdc2: lookup for GPIO wp failed
[ 287.611202] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/soc@03000000/sdmmc@04022000[0]'
[ 287.622611] mmc:failed to get gpios
[ 287.626898] sunxi-mmc sdc2: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 287.651836] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 287.678532] sunxi-mmc sdc2: detmode:alway in(non removable)
[ 287.678567] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 287.687096] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 287.688216] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm OD pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 287.699160] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm OD pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 287.699253] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm OD pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 287.712221] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm OD pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 287.757656] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 287.758602] sunxi-mmc sdc0: SD/MMC/SDIO Host Controller Driver(v3.44 2020-5-21 16:05-202006022045)
[ 287.758702] sunxi-mmc sdc0: ***ctl-spec-caps*** 8
[ 287.786982] sunxi-mmc sdc0: No vqmmc regulator found
[ 287.792631] sunxi-mmc sdc0: No vdmmc regulator found
[ 287.798211] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 8 timing LEGACY(SDR12) dt B
[ 287.801274] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 8 timing MMC-HS200 dt B
[ 287.801740] sunxi-mmc sdc2: sdc set ios:clk 100000000Hz bm PP pm ON vdd 21 width 8 timing MMC-HS200 dt B
[ 287.801982] sunxi-mmc sdc2: sdc set ios:clk 100000000Hz bm PP pm ON vdd 21 width 8 timing MMC-HS(SDR20) dt B
[ 287.802049] sunxi-mmc sdc2: sdc set ios:clk 52000000Hz bm PP pm ON vdd 21 width 8 timing MMC-HS(SDR20) dt B
[ 287.802220] sunxi-mmc sdc2: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 8 timing MMC-HS400 dt B
[ 287.802271] sunxi_mmc_get_hs400_cmd_dly,222
[ 287.802280] sunxi-mmc sdc2: failed to get HS400_cmd used default
[ 287.802297] sunxi-mmc sdc2: sdc set ios:clk 100000000Hz bm PP pm ON vdd 21 width 8 timing MMC-HS400 dt B
[ 287.802346] sunxi_mmc_get_hs400_cmd_dly,222
[ 287.802355] sunxi-mmc sdc2: failed to get HS400_cmd used default
[ 287.802512] mmc0: new HS400 MMC card at address 0001
[ 287.803415] mmcblk0: mmc0:0001 Q2J55L 7.09 GiB
[ 287.803716] mmcblk0boot0: mmc0:0001 Q2J55L partition 1 16.0 MiB
[ 287.807414] mmcblk0boot1: mmc0:0001 Q2J55L partition 2 16.0 MiB
[ 287.811103] mmcblk0rpmb: mmc0:0001 Q2J55L partition 3 4.00 MiB
[ 287.813672] mmcblk0: p1 p2 p3 p4 p5 p6
[ 287.931433] of_get_named_gpiod_flags: can't parse 'card-pwr-gpios' property of node '/soc@03000000/sdmmc@04020000[0]'
[ 287.944308] sunxi-mmc sdc0: set host busy
[ 287.948895] sunxi-mmc sdc0: GPIO lookup for consumer cd
[ 287.954804] sunxi-mmc sdc0: using device tree for GPIO lookup
[ 287.961376] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/soc@03000000/sdmmc@04020000[0]' - status (0)
[ 287.973579] sunxi-mmc sdc0: Got CD GPIO
[ 287.977934] sunxi-mmc sdc0: GPIO lookup for consumer wp
[ 287.983826] sunxi-mmc sdc0: using device tree for GPIO lookup
[ 287.990330] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc@03000000/sdmmc@04020000[0]'
[ 288.001713] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc@03000000/sdmmc@04020000[0]'
[ 288.013000] sunxi-mmc sdc0: using lookup tables for GPIO lookup
[ 288.019687] sunxi-mmc sdc0: lookup for GPIO wp failed
[ 288.025522] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/soc@03000000/sdmmc@04020000[0]' - status (0)
[ 288.038052] sunxi-mmc sdc0: sdc set ios:clk 0Hz bm PP pm UP vdd 22 width 1 timing LEGACY(SDR12) dt B
[ 288.048410] sunxi-mmc sdc0: no vqmmc,Check if there is regulator
[ 288.071932] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
[ 288.098868] sunxi-mmc sdc0: detmode:gpio irq
[ 288.104489] sunxi-mmc sdc1: SD/MMC/SDIO Host Controller Driver(v3.44 2020-5-21 16:05-202006022045)
[ 288.114760] sunxi-mmc sdc1: ***ctl-spec-caps*** 8
[ 288.120320] sunxi-mmc sdc1: No vmmc regulator found
[ 288.125829] sunxi-mmc sdc1: No vqmmc regulator found
[ 288.131431] sunxi-mmc sdc1: No vdmmc regulator found
[ 288.137044] sunxi-mmc sdc1: No vd33sw regulator found
[ 288.142749] sunxi-mmc sdc1: No vd18sw regulator found
[ 288.148480] sunxi-mmc sdc1: No vq33sw regulator found
[ 288.154180] sunxi-mmc sdc1: No vq18sw regulator found
[ 288.159896] of_get_named_gpiod_flags: can't parse 'card-pwr-gpios' property of node '/soc@03000000/sdmmc@04021000[0]'
[ 288.172703] sunxi-mmc sdc1: set host busy
[ 288.177284] sunxi-mmc sdc1: GPIO lookup for consumer cd
[ 288.183177] sunxi-mmc sdc1: using device tree for GPIO lookup
[ 288.189679] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/soc@03000000/sdmmc@04021000[0]'
[ 288.201066] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/soc@03000000/sdmmc@04021000[0]'
[ 288.212351] sunxi-mmc sdc1: using lookup tables for GPIO lookup
[ 288.219036] sunxi-mmc sdc1: lookup for GPIO cd failed
[ 288.224754] sunxi-mmc sdc1: GPIO lookup for consumer wp
[ 288.230647] sunxi-mmc sdc1: using device tree for GPIO lookup
[ 288.237144] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc@03000000/sdmmc@04021000[0]'
[ 288.248515] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc@03000000/sdmmc@04021000[0]'
[ 288.259797] sunxi-mmc sdc1: using lookup tables for GPIO lookup
[ 288.266474] sunxi-mmc sdc1: lookup for GPIO wp failed
[ 288.272239] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/soc@03000000/sdmmc@04021000[0]'
[ 288.283615] mmc:failed to get gpios
[ 288.287862] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 288.301853] sunxi-mmc sdc0: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
[ 288.311936] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 288.328510] sunxi-mmc sdc1: detmode:manually by software
[ 288.339974] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/user[0]' - status (0)
[ 288.350741] ledtrig-cpu: registered to indicate activity on CPUs
[ 288.357722] hidraw: raw HID events driver (C) Jiri Kosina
[ 288.370601] usbcore: registered new inte**ce driver usbhid
[ 288.376914] usbhid: USB HID core driver
[ 288.382103] ashmem: initialized
[ 288.386014] logger: created 256K log 'log_main'
[ 288.391573] logger: created 256K log 'log_events'
[ 288.397224] logger: created 256K log 'log_radio'
[ 288.402770] logger: created 256K log 'log_system'
[ 288.410430] usbcore: registered new inte**ce driver snd-usb-audio
[ 288.424663] [sunxi_hdmi_codec_init] driver and deivce register finished.
[ 288.434637] codec supply avcc not found, using dummy regulator
[ 288.441363] codec supply vcc33_audio not found, using dummy regulator
[ 288.449024] of_get_named_gpiod_flags: can't parse 'gpio-spk' property of node '/soc@03000000/codec@0x05096000[0]'
[ 288.460616] lineout_vol:26, linein_gain:3, fmin_gain:3, digital_vol:0, adcdrc_cfg:0, adchpf_cfg:0, dacdrc_cfg:0, dachpf_cfg:0, ramp_func_used:1, pa_msleep_time:120, pa_ctl_level:0, gpio-spk:0
[ 288.482156] sunxi-codec-machine sndcodec: sun50iw9-codec <-> cpudai mapping ok
[ 288.492849] sndhdmi sndhdmi: ASoC: CPU DAI (null) not registered
[ 288.499670] sndhdmi sndhdmi: snd_soc_register_card() failed: -517
[ 288.509683] sunxi-ahub-cpudai 5097000.cpudai3-controller: ahub cpudai id invalid
[ 288.518105] sunxi-ahub-cpudai: probe of 5097000.cpudai3-controller failed with error -22
[ 288.530833] sndahub sndahub: sunxi-ahub-aif1 <-> 5097000.cpudai0-controller mapping ok
[ 288.540903] sndahub sndahub: sunxi-ahub-aif2 <-> 5097000.cpudai1-controller mapping ok
[ 288.550592] sndahub sndahub: sunxi-ahub-aif3 <-> 5097000.cpudai2-controller mapping ok
[ 288.563329] u32 classifier
[ 288.566426] Actions configured
[ 288.570278] Netfilter messages via NETLINK v0.30.
[ 288.575610] nfnl_acct: registering with nfnetlink.
[ 288.581468] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 288.588678] ctnetlink v0.93: registering with nfnetlink.
[ 288.595506] xt_time: kernel timezone is -0000
[ 288.600557] ipip: IPv4 and MPLS over IPv4 tunneling driver
[ 288.607594] gre: GRE over IPv4 demultiplexor driver
[ 288.613117] ip_gre: GRE over IPv4 tunneling driver
[ 288.620189] IPv4 over IPsec tunneling driver
[ 288.626164] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 288.632519] arp_tables: arp_tables: (C) 2002 David S. Miller
[ 288.639010] Initializing XFRM netlink socket
[ 288.643863] IPsec XFRM device driver
[ 288.648883] NET: Registered protocol family 10
[ 288.656352] mip6: Mobile IPv6
[ 288.659760] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 288.667404] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 288.676124] NET: Registered protocol family 17
[ 288.681209] NET: Registered protocol family 15
[ 288.686374] Bluetooth: RFCOMM socket layer initialized
[ 288.692210] Bluetooth: RFCOMM ver 1.11
[ 288.696474] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 288.702473] Bluetooth: BNEP filters: protocol multicast
[ 288.708390] Bluetooth: BNEP socket layer initialized
[ 288.714012] Bluetooth: HIDP (Human Inte**ce Emulation) ver 1.2
[ 288.720712] Bluetooth: HIDP socket layer initialized
[ 288.726357] l2tp_core: L2TP core driver, V2.0
[ 288.731299] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 288.737308] Registered cp15_barrier emulation handler
[ 288.743043] Registered setend emulation handler
[ 288.749515] registered taskstats version 1
[ 288.765183] of_get_named_gpiod_flags: parsed 'gpio' property of node '/codec-power[0]' - status (0)
[ 288.782064] cpu cpu1: opp_list_debug_create_link: Failed to create link
[ 288.789540] cpu cpu1: _add_opp_dev: Failed to register opp debugfs (-12)
[ 288.797271] cpu cpu2: opp_list_debug_create_link: Failed to create link
[ 288.804757] cpu cpu2: _add_opp_dev: Failed to register opp debugfs (-12)
[ 288.812491] cpu cpu3: opp_list_debug_create_link: Failed to create link
[ 288.819961] cpu cpu3: _add_opp_dev: Failed to register opp debugfs (-12)
[ 288.831327] sndhdmi sndhdmi: audiohdmi-dai <-> sunxi-ahub-cpu-aif1 mapping ok
[ 288.840413] of_get_named_gpiod_flags: parsed 'usb_det_vbus_gpio' property of node '/soc@03000000/usbc0@0[0]' - status (0)
[ 288.852778] of_get_named_gpiod_flags: parsed 'usb_id_gpio' property of node '/soc@03000000/usbc0@0[0]' - status (0)
[ 288.866592] rtc-rx8010 3-0032: Frequency stop detected
[ 288.872404] rtc-rx8010 3-0032: hctosys: unable to read the hardware clock
[ 288.880839] snddaudio snddaudio3: codec: wm8960.3-001a, codec_dai: wm8960-hifi.
[ 288.889077] snddaudio snddaudio3: ASoC: CPU DAI (null) not registered
[ 288.896333] snddaudio snddaudio3: snd_soc_register_card failed
[ 288.903920] otg-vbus: disabling
[ 288.907866] axp858-dcdc4: disabling
[ 288.913123] axp858-aldo3: disabling
[ 288.920113] ALSA device list:
[ 288.923485] #0: audiocodec
[ 288.926715] #1: sndahub
[ 288.929649] #2: sndhdmi
[ 288.934664] Freeing unused kernel memory: 4352K
[/init]: getty is ttyS0
[/init]: RootDevice is "/dev/mmcblk0p4" , GPT_SUPPORT=1
[/init]: Try to load EMMC ...
e2fsck 1.42.12 (29-Aug-2014)
/dev/mmcblk0p4: recovering journal
[ 289.326842] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 289.340165] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 289.352877] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !!
[ 289.359595] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !!
[ 289.366288] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !!
[ 289.372991] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !!
[ 289.378929] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
[ 289.390267] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 289.415229] sunxi-mmc sdc1: sdc set ios:clk 300000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
Setting free blocks count to 364177 (was 364178)
/dev/mmcblk0p4: clean, 5360/131072 files, 160111/524288 blocks
[ 289.975049] EXT4-fs (mmcblk0p4): barriers disabled
[ 289.982041] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,barrier=0,data=ordered
Starting syslogd: OK
Starting klogd: OK
start adb
[ 290.238082] file system registered
install_listener('tcp:5037','*smartsocket*')
[ 290.292564] read descriptors
Populating /dev using udev: [ 290.299333] read strings
[ 290.315772] udevd[3638]: starting version 3.2.7
[ 290.331499] udevd[3638]: specified group 'input' unknown
[ 290.338083] udevd[3638]: specified group 'kvm' unknown
[ 290.357247] udevd[3641]: starting eudev-3.2.7
[ 290.440235] sunxi-mmc sdc1: sdc set ios:clk 300000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 290.453886] sunxi-mmc sdc1: sdc set ios:clk 300000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 290.466968] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !!
[ 290.473966] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !!
[ 290.480939] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !!
[ 290.487940] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !!
[ 290.493832] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
[ 290.505410] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 290.531903] sunxi-mmc sdc1: sdc set ios:clk 200000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 291.153066] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 291.157109] EXT4-fs (mmcblk0p6): couldn't mount as ext3 due to feature incompatibilities
[ 291.168623] EXT4-fs (mmcblk0p6): recovery complete
[ 291.168641] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
done
Initializing random number generator... done.
Starting system message bus: done
Starting network: [ 291.565833] sunxi-mmc sdc1: sdc set ios:clk 200000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 291.579600] sunxi-mmc sdc1: sdc set ios:clk 200000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 291.593165] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !!
[ 291.600710] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !!
[ 291.608267] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !!
[ 291.615818] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !!
[ 291.621814] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
[ 291.633172] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 291.658582] sunxi-mmc sdc1: sdc set ios:clk 100000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 291.695899] snddaudio snddaudio3: codec: wm8960.3-001a, codec_dai: wm8960-hifi.
[ 291.704211] snddaudio snddaudio3: ASoC: CPU DAI (null) not registered
[ 291.714111] libphy: gmac0: probed
[ 291.718153] snddaudio snddaudio3: snd_soc_register_card failed
[ 291.778891] sunxi-gmac gmac0 eth0: eth0: Type(7) PHY ID 004dd074 at 1 IRQ poll (gmac0-0:01)
OK
Starting php-fpm done
Starting lighttpd: OK
Starting sshd: OK
start matrix browser
Starting vsftpd: OK
[ 292.091100] sunxi-bt soc@03000000:bt: set block: 0
[ 292.096535] Internal error: Accessing user space memory outside uaccess.h routines: 96000005 [#1] PREEMPT SMP
[ 292.107634] Modules linked in:
[ 292.111074] CPU: 1 PID: 3829 Comm: S97BT Tainted: G W 4.9.170 #2
[ 292.119059] Hardware name: sun50iw9 (DT)
[ 292.123458] task: ffffffc07896d700 task.stack: ffffffc07a3e4000
[ 292.130111] PC is at sunxi_wl_poweren_set+0x58/0x88
[ 292.135586] LR is at sunxi_bt_set_block+0x6c/0xb8
[ 292.140854] pc : [<ffffff8008566aec>] lr : [<ffffff8008566628>] pstate: 20400145
[ 292.149134] sp : ffffffc07a3e7c10
[ 292.152837] x29: ffffffc07a3e7c10 x28: ffffffc07896d700
[ 292.158798] x27: ffffff8008a63000 x26: 0000000000000040
[ 292.164774] x25: 0000000000000123 x24: ffffffc07900dd20
[ 292.170741] x23: ffffffc07959fc80 x22: ffffffc07a2b1870
[ 292.176712] x21: ffffffc07b594c10 x20: 0000000000000001
[ 292.182674] x19: 0000000000000001 x18: 000000000000000a
[ 292.188645] x17: 00000000004a7820 x16: ffffff800820cc30
[ 292.194620] x15: 00000000000163dc x14: ffffff8089461b7f
[ 292.200595] x13: ffffffffffffffff x12: 0000000000000030
[ 292.206567] x11: 00000000fffffffe x10: ffffff8009461b8d
[ 292.212540] x9 : 0000000005f5e0ff x8 : 6c6220746573203a
[ 292.218503] x7 : 0000000000000000 x6 : 0000000000000000
[ 292.224475] x5 : 0000000000000000 x4 : ffffff80094bd508
[ 292.230431] x3 : ffffff80094bd000 x2 : 0000000000000000
[ 292.236401] x1 : ffffff80094bd508 x0 : 0000000000000000
[ 292.242377]
[ 292.242377] SP: 0xffffffc07a3e7b90:
[ 292.247933] 7b90 7a2b1870 ffffffc0 7959fc80 ffffffc0 7900dd20 ffffffc0 00000123 00000000
[ 292.257186] 7bb0 00000040 00000000 08a63000 ffffff80 7896d700 ffffffc0 7a3e7c10 ffffffc0
[ 292.266434] 7bd0 08566628 ffffff80 7a3e7c10 ffffffc0 08566aec ffffff80 20400145 00000000
[ 292.275666] 7bf0 ffffffd0 00000000 000409aa 00000000 ffffffff 0000007f 7a3e7c60 ffffffc0
[ 292.284939] 7c10 7a3e7c30 ffffffc0 08566628 ffffff80 00000001 00000000 792dfa98 ffffffc0
[ 292.294189] 7c30 7a3e7c60 ffffffc0 08a3e744 ffffff80 7a2b1800 ffffffc0 00000001 00000000
[ 292.303445] 7c50 00000000 00000000 00000001 00000000 7a3e7c90 ffffffc0 08a3ec24 ffffff80
[ 292.312665] 7c70 093e8970 ffffff80 0927d000 ffffff80 00000002 00000000 08a3ebe4 ffffff80
[ 292.321892]
[ 292.321892] X21: 0xffffffc07b594b90:
[ 292.327545] 4b90 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 292.336741] 4bb0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 292.345955] 4bd0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 292.355232] 4bf0 00000000 00000000 00000000 00000000 7b6e4800 ffffffc0 ffffffff 00000000
[ 292.364505] 4c10 7b57c010 ffffffc0 7b6e5200 ffffffc0 7b6e4800 ffffffc0 7b595028 ffffffc0
[ 292.373746] 4c30 7b594828 ffffffc0 7b57c020 ffffffc0 7ca36c80 ffffffc0 09334bb8 ffffff80
[ 292.382967] 4c50 7b6e6708 ffffffc0 00000005 00000007 00000000 00000000 00000000 00000000
[ 292.392183] 4c70 00000001 00040004 7b594c78 ffffffc0 7b594c78 ffffffc0 00000000 00000000
[ 292.401381]
[ 292.401381] X22: 0xffffffc07a2b17f0:
[ 292.407043] 17f0 00000000 00000000 00000000 00000000 00070007 00000002 80000004 00000000
[ 292.416230] 1810 00000000 00000101 08ad0bf0 ffffff80 792dfa98 ffffffc0 792dfc80 ffffffc0
[ 292.425446] 1830 08a3dfa4 ffffff80 00000000 00000000 00000000 00000000 7a2b1848 ffffffc0
[ 292.434661] 1850 7a2b1848 ffffffc0 78c619b0 ffffffc0 7b0faab0 ffffffc0 00000000 00000000
[ 292.443943] 1870 7b594c10 ffffffc0 7ae59400 ffffffc0 792dfc80 ffffffc0 792fa818 ffffffc0
[ 292.453195] 1890 792fa418 ffffffc0 792dfd00 ffffffc0 7ca36c80 ffffffc0 09334bb8 ffffff80
[ 292.462446] 18b0 79324c30 ffffffc0 00000003 00000007 00000000 00000000 00000000 00000000
[ 292.471660] 18d0 00000001 00000000 7a2b18d8 ffffffc0 7a2b18d8 ffffffc0 00000000 00000000
[ 292.480869]
[ 292.480869] X23: 0xffffffc07959fc00:
[ 292.486526] fc00 00000000 000081a4 00000000 00000000 00000000 00000000 00000123 00000000
[ 292.495808] fc20 129fdff7 00000000 00000123 00000000 1247ce11 00000000 00000123 00000000
[ 292.505081] fc40 1247ce11 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 292.514347] fc60 7959fc60 ffffffc0 7959fc60 ffffffc0 00010001 00000000 00000000 00000000
[ 292.523628] fc80 79000a31 ffffffc0 756e696c 61612d78 36686372 6f732e34 0000312e 00000000
[ 292.532935] fca0 79fd2568 ffffffc0 00000000 00000000 00000000 00000000 00000000 00000000
[ 292.542265] fcc0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 292.551520] fce0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 292.560764]
[ 292.560764] X24: 0xffffffc07900dca0:
[ 292.566420] dca0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 292.575656] dcc0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 292.584900] dce0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 292.594144] dd00 79325078 ffffffc0 7900de00 ffffffc0 7900dc00 ffffffc0 00000000 00000000
[ 292.603402] dd20 00000000 00010001 7900dd28 ffffffc0 7900dd28 ffffffc0 7896d700 ffffffc0
[ 292.612623] dd40 7900dd20 ffffffc0 00000000 00000000 00000000 00000000 00000000 00000000
[ 292.621874] dd60 00000000 00000000 00000000 00000000 00000000 00000000 7959f820 ffffffc0
[ 292.631114] dd80 7959f820 ffffffc0 00000000 00000000 00000000 00000000 00000000 00000000
[ 292.640366]
[ 292.640366] X28: 0xffffffc07896d680:
[ 292.646019] d680 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 292.655271] d6a0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 292.664529] d6c0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 292.673759] d6e0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 292.683011] d700 [ 292.683738] sunxi-mmc sdc1: sdc set ios:clk 100000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 292.687595] sunxi-mmc sdc1: sdc set ios:clk 100000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 292.692137] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !!
[ 292.695454] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !!
[ 292.698762] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !!
[ 292.702025] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !!
[ 292.702073] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
[ 292.739976] 00000012 00000000 ffffffff ffffffff b9b05000 036a0000 00000001 00000000
[ 292.748950] d720 00000000 00000000 7a3e4000 ffffffc0 00000002 00404100 00000000 00000000
[ 292.758180] d740 00000000 00000000 00000001 00000001 00000045 00000000 fffff5c1 00000000
/etc/init.d/rcS: line 12: 3829 Segmentation fault $i start
[ 292.762836] d760 7896ba00 ffffffc0 00000001 00000001 00000078 00000078 00000078 00000000
[ 292.762852]
[ 292.762852] X29: 0xffffffc07a3e7b90:
[ 292.762853] 7b90 7a2b1870 ffffffc0 7959fc80 ffffffc0 7900dd20 ffffffc0 00000123 00000000
[ 292.762866] 7bb0 00000040 00000000 08a63000 ffffff80 7896d700 ffffffc0 7a3e7c10 ffffffc0
[ 292.762878] 7bd0 08566628 ffffff80 7a3e7c10 ffffffc0 08566aec ffffff80 20400145 00000000
[ 292.762891] 7bf0 ffffffd0 00000000 000409aa 00000000 ffffffff 0000007f 7a3e7c60 ffffffc0
[ 292.762903] 7c10 7a3e7c30 ffffffc0 08566628 ffffff80 00000001 00000000 792dfa98 ffffffc0
[ 292.762924] 7c30 7a3e7c60 ffffffc0 08a3e744 ffffff80 7a2b1800 ffffffc0 00000001 00000000
[ 292.762934] 7c50 00000000 00000000 00000001 00000000 7a3e7c90 ffffffc0 08a3ec24 ffffff80
[ 292.762944] 7c70 093e8970 ffffff80 0927d000 ffffff80 00000002 00000000 08a3ebe4 ffffff80
[ 292.762946]
[ 292.762950] Process S97BT (pid: 3829, stack limit = 0xffffffc07a3e4000)
[ 292.762953] Stack: (0xffffffc07a3e7c10 to 0xffffffc07a3e8000)
[ 292.762957] 7c00: ffffffc07a3e7c30 ffffff8008566628
[ 292.762961] 7c20: 0000000000000001 ffffffc0792dfa98 ffffffc07a3e7c60 ffffff8008a3e744
[ 292.762965] 7c40: ffffffc07a2b1800 0000000000000001 0000000000000000 0000000000000001
[ 292.762969] 7c60: ffffffc07a3e7c90 ffffff8008a3ec24 ffffff80093e8970 ffffff800927d000
[ 292.762973] 7c80: 0000000000000002 ffffff8008a3ebe4 ffffffc07a3e7ce0 ffffff8008531fe4
[ 292.762977] 7ca0: ffffffc07a2b1880 ffffff80093e8a60 ffffffc07959fc80 0000000000000002
[ 292.762980] 7cc0: ffffffc07a3e7eb0 0000000000000040 0000000000000001 00000000000409aa
[ 292.762984] 7ce0: ffffffc07a3e7d10 ffffff8008297708 0000000000000002 ffffffc07959fc80
[ 292.762988] 7d00: ffffffc07900dd00 ffffffc07900dd00 ffffffc07a3e7d40 ffffff8008296514
[ 292.762993] 7d20: 0000000000000002 ffffffffffffffea ffffffc07959fc80 ffffffc07896d700
[ 292.762997] 7d40: ffffffc07a3e7d80 ffffff800820a8b8 ffffff800927d000 ffffffc07900de00
[ 292.763001] 7d60: ffffffc07a3e7eb0 0000000000000002 00000000134c2c50 0000000000000002
[ 292.763005] 7d80: ffffffc07a3e7e30 ffffff800820b808 0000000000000000 ffffffc07900de00
[ 292.763008] 7da0: 0000000000000002 00000000134c2c50 ffffffc07a3e7eb0 ffffff8008440114
[ 292.763013] 7dc0: 0000000000000000 ffffffc078822280 ffffffc078822280 ffffff8008da1000
[ 292.763017] 7de0: ffffffc07a3e7e00 ffffff800820ecd4 0000000000000001 ffffff800820eca0
[ 292.763021] 7e00: ffffffc07a3e7e30 ffffff800820b7f4 0000000000000000 ffffffc07900de00
[ 292.763024] 7e20: 0000000000000002 00000000000409aa ffffffc07a3e7e70 ffffff800820cca0
[ 292.763029] 7e40: ffffff800927d000 ffffffc07900de00 ffffffc07900de00 fffffffffffffff7
[ 292.763032] 7e60: 00000000134c2c50 0000000000000000 0000000000000000 ffffff8008083540
[ 292.763036] 7e80: ffffffffffffff1d 0000004076435000 ffffffffffffffff 0000007f7bd93fb8
[ 292.763040] 7ea0: 0000000020000000 0000000000000015 0000000000000000 00000000000409aa
[ 292.763044] 7ec0: 0000000000000001 00000000134c2c50 0000000000000002 0000000000000001
[ 292.763048] 7ee0: 0000000000000000 0000000044011000 0000000000000077 000000000000007c
[ 292.763051] 7f00: 0000000000000040 0000000000000000 0101010101010101 0000000000000000
[ 292.763055] 7f20: 0000000000000000 0000000000000000 0000007f7bce7c20 0000007f7bcdacf0
[ 292.763059] 7f40: 0000000000000000 00000000004a7820 00000000000001d4 0000000000000002
[ 292.763063] 7f60: 00000000134c2c50 0000007f7be1f488 0000000000000002 00000000134c2c50
[ 292.763067] 7f80: 0000000000000002 00000000004b23b8 00000000004b2000 0000000000000000
[ 292.763071] 7fa0: 00000000134c27a0 0000007feca4fde0 0000007f7bd4277c 0000007feca4fde0
[ 292.763075] 7fc0: 0000007f7bd93fb8 0000000020000000 0000000000000001 0000000000000040
[ 292.763078] 7fe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 292.763080] Call trace:
[ 292.763084] Exception stack(0xffffffc07a3e7a20 to 0xffffffc07a3e7b50)
[ 292.763087] 7a20: 0000000000000001 0000007fffffffff 00000000414db000 ffffff8008566aec
[ 292.763091] 7a40: 0000000020400145 40636f733a6d726f 3030303030303330 ffffff800074623a
[ 292.763095] 7a60: ffffff80093eb280 0000000000000000 ffffffc07a3e7b60 ffffff80081aea90
[ 292.763099] 7a80: 0000000000000081 0000000000000000 ffffff80093ec600 00000000024200ca
[ 292.763103] 7aa0: 00000000024200ca 00000000000409aa ffffffc07a3e7b60 ffffff800853330c
[ 292.763107] 7ac0: ffffffc07b594c10 0000000000000006 ffffffc07a3e7bc8 00000000000409aa
[ 292.763110] 7ae0: 0000000000000000 ffffff80094bd508 0000000000000000 ffffff80094bd000
[ 292.763114] 7b00: ffffff80094bd508 0000000000000000 0000000000000000 0000000000000000
[ 292.763118] 7b20: 6c6220746573203a 0000000005f5e0ff ffffff8009461b8d 00000000fffffffe
[ 292.763120] 7b40: 0000000000000030 ffffffffffffffff
[ 292.763133] [<ffffff8008566aec>] sunxi_wl_poweren_set+0x58/0x88
[ 292.763137] [<ffffff8008566628>] sunxi_bt_set_block+0x6c/0xb8
[ 292.763145] [<ffffff8008a3e744>] rfkill_set_block+0xac/0x138
[ 292.763149] [<ffffff8008a3ec24>] state_store+0xa4/0xe0
[ 292.763155] [<ffffff8008531fe4>] dev_attr_store+0x44/0x5c
[ 292.763162] [<ffffff8008297708>] sysfs_kf_write+0x60/0x70
[ 292.763165] [<ffffff8008296514>] kernfs_fop_write+0x168/0x1a8
[ 292.763171] [<ffffff800820a8b8>] __vfs_write+0x60/0x150
[ 292.763174] [<ffffff800820b808>] vfs_write+0xcc/0x188
[ 292.763177] [<ffffff800820cca0>] SyS_write+0x70/0xc8
[ 292.763183] [<ffffff8008083540>] el0_svc_naked+0x34/0x38
[ 292.763189] Code: 2a000040 b9000c80 f9428460 91142061 (b9403000)
[ 292.763194] ---[ end trace e782a644c28181e7 ]---
Loading /var/lib/alsa/asound.state
Failed creating base context during opening of kernel driver.
Kernel module may not have been loaded
Could not initialize egl display
[ 293.518359] mali_kbase: loading out-of-tree module taints kernel.
[ 293.547640] mali gpu: Regulators probed: 1
[ 293.552374] mali gpu: Clocks probed: 2
[ 293.559664] mali gpu: [960mv-648MHz] bak[950mv-600MHz] inde_power:1 idle:0 dvfs:0
[ 293.570878] mali gpu: GPU identified as 0x3 arch 7.0.9 r0p0 status 0
[ 293.578315] mali gpu: No memory group manager is configured
[ 293.585777] mali gpu: Using configured power model mali-**-power-model, and fallback mali-**-power-model
[ 293.598282] mali gpu: Probed as mali0
[ 293.602978] snddaudio snddaudio3: codec: wm8960.3-001a, codec_dai: wm8960-hifi.
[ 293.611345] snddaudio snddaudio3: ASoC: CPU DAI (null) not registered
[ 293.618595] snddaudio snddaudio3: snd_soc_register_card failed
#
|
|
|小黑屋|
飞凌嵌入式
( 冀ICP备12004394号-1 )
发表于 2022-4-8 14:19:10
千斤顶
