windows 系统uuu烧写 OKMX8MPQ-C 固件出现如下错误。

jssys04 · 发表于 2022-12-8 11:24:53

本帖最后由 jssys04 于 2022-12-8 11:32 编辑

uuu_imx_android_flash.bat -f imx8mp -e
......
1:1 1/ 1 [HID(W):LIBUSB_ERROR_TIMEOUT ] SDPS: boot -f u-boot-imx8mp-evk-uuu.imx.link

反复插拔usb也是一样，这个怎么解决？

jssys04 · 发表于 2022-12-8 17:38:37

本帖最后由 jssys04 于 2022-12-8 17:47 编辑

linux 下载也是类似错误

wyb@wyb:~/NXP_PATH/uuu$ sudo ./uuu_imx_android_flash.sh -f imx8mp -e
This script is validated with uuu 1.4.72 version, it is recommended to align with this version.
dtbo is supported
dual slot is supported
dynamic parttition is supported
vendor_boot parttition is supported
generate lines to flash u-boot-imx8mp.imx to the partition of bootloader0
generate lines to flash partition-table.img to the partition of gpt
generate lines to flash dtbo-imx8mp.img to the partition of dtbo_a
generate lines to flash boot.img to the partition of boot_a
generate lines to flash vendor_boot.img to the partition of vendor_boot_a
generate lines to flash vbmeta-imx8mp.img to the partition of vbmeta_a
generate lines to flash dtbo-imx8mp.img to the partition of dtbo_b
generate lines to flash boot.img to the partition of boot_b
generate lines to flash vendor_boot.img to the partition of vendor_boot_b
generate lines to flash vbmeta-imx8mp.img to the partition of vbmeta_b
generate lines to flash super.img to the partition of super
generate lines to flash logo.img to the partition of logo
uuu script generated, start to invoke uuu with the generated uuu script
uuu (Universal Update Utility) for nxp imx chips -- libuuu_1.4.139-0-g1a8f760

Success 0 Failure 1

1:73 1/ 1 [HID(W):LIBUSB_ERROR_TIMEOUT ] SDPS: boot -f u-boot-imx8mp-evk-uuu.imx

snn · 发表于 2022-12-9 09:05:05

本帖最后由 snn 于 2022-12-9 09:10 编辑

出现这种情况一般是开着虚拟机导致windows没有连接到开发板，可以关掉虚拟机试试；也可能是uuu版本较低，我这边使用uuu_1.4.139是没问题的

jssys04 · 发表于 2022-12-9 09:42:30

我这边开发环境不用虚拟机，都是在一个ubuntu机器上编译。
windows10上是拷贝的固件，按照配置下载。
linux是ubuntu18的机器按照配置下载的。

刚查看了下uuu版本本身是uuu_1.4.139. 是贵司提供的脚本显示问题

win10下D:\uuu>uuu -v
uuu (Universal Update Utility) for nxp imx chips -- libuuu_1.4.139-0-g1a8f760

Build in config:
      Pctl    Chip          Vid    Pid    BcdVersion
      ==================================================
      SDPS: MX8QXP       0x1fc9  0x012f  [0x0002..0xffff]
      SDPS: MX8QM          0x1fc9  0x0129  [0x0002..0xffff]
      SDPS: MX8DXL       0x1fc9  0x0147
      SDPS: MX28          0x15a2  0x004f
      SDPS: MX815          0x1fc9  0x013e
      SDPS: MX865          0x1fc9  0x0146
      SDPS: MX8ULP       0x1fc9  0x014a
      SDPS: MX8ULP       0x1fc9  0x014b
      SDP:    MX7D          0x15a2  0x0076
      SDP:    MX6Q          0x15a2  0x0054
      SDP:    MX6D          0x15a2  0x0061
      SDP:    MX6SL          0x15a2  0x0063
      SDP:    MX6SX          0x15a2  0x0071
      SDP:    MX6UL          0x15a2  0x007d
      SDP:    MX6ULL       0x15a2  0x0080
      SDP:    MX6SLL       0x1fc9  0x0128
      SDP:    MX7ULP       0x1fc9  0x0126
      SDP:    MXRT106X       0x1fc9  0x0135
      SDP:    MX8MM          0x1fc9  0x0134
      SDP:    MX8MQ          0x1fc9  0x012b
      SDPU: SPL          0x0525  0xb4a4  [0x0000..0x04ff]
      SDPV: SPL1          0x0525  0xb4a4  [0x0500..0x9998]
      SDPU: SPL          0x0525  0xb4a4  [0x9999..0x9999]
      SDPU: SPL          0x3016  0x1001  [0x0000..0x04ff]
      SDPV: SPL1          0x3016  0x1001  [0x0500..0x9998]
      FBK:                   0x066f  0x9afe
      FBK:                   0x066f  0x9bff
      FB:                   0x0525  0xa4a5
      FB:                   0x18d1  0x0d02
      FB:                   0x3016  0x0001
Wait for Known USB Device Appear...

Error: fail open file: >./

ubuntu18下

wyb@wyb:~/NXP_PATH/uuu$ uuu -v
uuu (Universal Update Utility) for nxp imx chips -- libuuu_1.4.139-0-g1a8f760

Build in config:
Pctl  Chip Vid  Pid  BcdVersion
==================================================
SDPS:  MX8QXP 0x1fc9  0x012f  [0x0002..0xffff]
SDPS:  MX8QM 0x1fc9  0x0129  [0x0002..0xffff]
SDPS:  MX8DXL 0x1fc9  0x0147
SDPS:  MX28 0x15a2  0x004f
SDPS:  MX815 0x1fc9  0x013e
SDPS:  MX865 0x1fc9  0x0146
SDPS:  MX8ULP 0x1fc9  0x014a
SDPS:  MX8ULP 0x1fc9  0x014b
SDP:  MX7D 0x15a2  0x0076
SDP:  MX6Q 0x15a2  0x0054
SDP:  MX6D 0x15a2  0x0061
SDP:  MX6SL 0x15a2  0x0063
SDP:  MX6SX 0x15a2  0x0071
SDP:  MX6UL 0x15a2  0x007d
SDP:  MX6ULL 0x15a2  0x0080
SDP:  MX6SLL 0x1fc9  0x0128
SDP:  MX7ULP 0x1fc9  0x0126
SDP:  MXRT106X  0x1fc9  0x0135
SDP:  MX8MM 0x1fc9  0x0134
SDP:  MX8MQ 0x1fc9  0x012b
SDPU:  SPL 0x0525  0xb4a4  [0x0000..0x04ff]
SDPV:  SPL1 0x0525  0xb4a4  [0x0500..0x9998]
SDPU:  SPL 0x0525  0xb4a4  [0x9999..0x9999]
SDPU:  SPL 0x3016  0x1001  [0x0000..0x04ff]
SDPV:  SPL1 0x3016  0x1001  [0x0500..0x9998]
FBK:    0x066f  0x9afe
FBK:    0x066f  0x9bff
FB:    0x0525  0xa4a5
FB:    0x18d1  0x0d02
FB:    0x3016  0x0001
Wait for Known USB Device Appear...

Error: fail open file: >./

L_S_H · 发表于 2022-12-9 10:12:18

您目前开发板使用的linu系统吗，目前开发板可以正常登录进系统吗，目前使用的资料是哪个版本呢，您可先先测试一下制成烧写卡的形式，先烧录安卓，制作烧写卡的过程中您需要把制卡脚本放在和安卓uboot的目录下，然后在尝试使用uuu烧写，如果数据线连接不稳定的话也会报您这个错误，也可以换一根线来尝试

jssys04 · 发表于 2022-12-9 10:23:11

开发版是刚买到的，之前没有测试是否能正常登录系统，现在烧写不进去，再连接debug口，发现不能登录系统。
使用的资料是【OKMX8MPQ-C开发板产品资料发布记录-2022.11.08.pdf 】里面最新网盘资料。
等一下我先尝试下写卡方式。

L_S_H · 发表于 2022-12-9 10:26:48

jssys04 发表于 2022-12-9 10:23
开发版是刚买到的，之前没有测试是否能正常登录系统，现在烧写不进去，再连接debug口，发现不能登录系统。
...

如果把制完卡按照手册把需要的文件都放进去了还是不能正常烧写，您在制完卡的tf卡中要放一个Linux镜像里的kernel目录，这个是Linux的内核和设备树文件您再尝试一下

jssys04 · 发表于 2022-12-9 11:33:59

T卡无法升级

[11:32:13]U-Boot SPL 2020.04-00012-g7f68cd5a24-dirty (Jun 27 2022 - 07:14:44 +0000)
[11:32:13]forlinx eep: 2022-06-20 ver 1
[11:32:15]eep: now update emmc pins for bootrom
[11:32:15]using eep parameter
[11:32:15]DDRINFO: start DRAM init
[11:32:15]DDRINFO: DRAM rate 4000MTS
[11:32:15]DDRINFO:ddrphy calibration done
[11:32:15]DDRINFO: ddrmix config done
[11:32:15]Normal Boot
[11:32:15]Trying to boot from BOOTROM
[11:32:15]image offset 0x8000, pagesize 0x200, ivt offset 0x0
[11:32:15]NOTICE:  BL31: v2.2(release):rel_imx_5.4.70_2.3.0-0-gf1d7187f2
[11:32:15]NOTICE:  BL31: Built : 03:31:00, Apr  8 2021
[11:32:15]Forlinx
[11:32:15]
[11:32:15]U-Boot 2020.04-00012-g7f68cd5a24-dirty (Jun 27 2022 - 07:14:44 +0000)
[11:32:15]
[11:32:15]CPU: i.MX8MP[8] rev1.1 1600 MHz (running at 1200 MHz)
[11:32:16]CPU: Industrial temperature grade (-40C to 105C) at 35C
[11:32:16]Reset cause: POR
[11:32:16]Model: Forlinx OK8MPlus LPDDR4 EVK board
[11:32:16]DRAM:  4 GiB
[11:32:16]MMC: FSL_SDHC: 1, FSL_SDHC: 2
[11:32:16]boot dev is not emmc, using static dtb
[11:32:16]mipi_panel enable
[11:32:16]lvds0_panel enable
[11:32:16]eth0 enable
[11:32:16]eth1 enable
[11:32:16]Loading Environment from MMC... *** Warning - bad CRC, using default environment
[11:32:16]
[11:32:16][*]-Video Link 0 (1024 x 600)
[11:32:16]       [0] lcd-controller@32e80000, video
[11:32:16]       [1] mipi_dsi@32e60000, video_bridge
[11:32:16]       [2] mipi_panel, panel
[11:32:16][*]-Video Link 1 (1280 x 800)
[11:32:16]       [0] lcd-controller@32e90000, video
[11:32:16]       [1] ldb@32ec005c, video_bridge
[11:32:16]       [2] lvds0_panel, panel
[11:32:16][ ]-Video Link 2
[11:32:16]       [0] lcd-controller@32e90000, video
[11:32:16]       [1] ldb@32ec005c, video_bridge
[11:32:16]In: serial
[11:32:16]Out: serial
[11:32:16]Err: serial
[11:32:16]
[11:32:16] BuildInfo:
[11:32:16]  - ATF f1d7187
[11:32:16]  - U-Boot 2020.04-00012-g7f68cd5a24-dirty
[11:32:16]
[11:32:16]switch to partitions #0, OK
[11:32:16]mmc1 is current device
[11:32:16]secure check passed
[11:32:16]flash target is MMC:1
[11:32:17]Net: config yt8521
[11:32:17]eth0: ethernet@30be0000
[11:32:17]Fastboot: Normal
[11:32:17]Normal Boot
[11:32:17]Autoboot in 1 seconds
[11:32:18]switch to partitions #0, OK
[11:32:18]mmc1 is current device
[11:32:18]switch to partitions #0, OK
[11:32:18]mmc1 is current device
[11:32:18]34 bytes read in 15 ms (2 KiB/s)
[11:32:20]28150272 bytes read in 1202 ms (22.3 MiB/s)
[11:32:20]8906464 bytes read in 394 ms (21.6 MiB/s)
[11:32:20]67111 bytes read in 33 ms (1.9 MiB/s)
[11:32:20]## Loading init Ramdisk from Legacy Image at 43800000 ...
[11:32:20] Image Name: ramdisk
[11:32:20] Image Type: ARM Linux RAMDisk Image (gzip compressed)
[11:32:20] Data Size: 8906400 Bytes = 8.5 MiB
[11:32:20] Load Address: 00000000
[11:32:20] Entry Point:  00000000
[11:32:20] Verifying Checksum ... OK
[11:32:20]## Flattened Device Tree blob at 43000000
[11:32:20] Booting using the fdt blob at 0x43000000
[11:32:20] Using Device Tree in place at 0000000043000000, end 0000000043013626
[11:32:20]
[11:32:20]Starting kernel ...
[11:32:20]

jssys04 · 发表于 2022-12-9 11:39:04

uuu烧写log

[11:37:27]U-Boot SPL 2020.04 (Aug 22 2022 - 07:35:18 +0000)
[11:37:28]boot mode is usb skip eep
[11:37:28]using static parameter
[11:37:28]DDRINFO: start DRAM init
[11:37:28]DDRINFO: DRAM rate 4000MTS
[11:37:28]Training FAILED

L_S_H · 发表于 2022-12-9 13:17:34

jssys04 发表于 2022-12-9 11:33
T卡无法升级

[11:32:13]U-Boot SPL 2020.04-00012-g7f68cd5a24-dirty (Jun 27 2022 - 07:14:44 +0000)
...

我能看一下您这边烧写卡放入的文件吗

L_S_H · 发表于 2022-12-9 13:21:06

L_S_H 发表于 2022-12-9 13:17
我能看一下您这边烧写卡放入的文件吗

您那边放入一个linux镜像得到kernel文件，您这个制卡的打印信息是卡在kernel无法往下进行了

jssys04 · 发表于 2022-12-9 13:38:38

L_S_H 发表于 2022-12-9 13:17
我能看一下您这边烧写卡放入的文件吗

L_S_H · 发表于 2022-12-9 13:52:33

jssys04 发表于 2022-12-9 13:38

不好意思这边看不到您的图片，您可以发邮件到我们的邮箱linux@forlinx.com

[Android] windows 系统uuu烧写 OKMX8MPQ-C 固件出现如下错误。

点评

点评

点评

点评

i.MX8MP通行证