IMX6Q更新系统受阻 平台IMX6Q-C,底板V1.1

PPDDR

UBNUTU 下执行SD卡更新盘提示不成功.我将BIN SYSTEM两个文件夹的内容直接复制到SD卡上,拨码到SD卡，复位或重上电，串口上输也的是全0X00，就没有后续了。
UBNUTU 用FORLINX网盘提供的那个12.04
   ################################################################################
This script will create a bootable SD card from custom or pre-built binaries.

The script must be run with root permissions and from the bin directory of
the SDK

Example:
$ sudo ./create-sdcard.sh

Formatting can be skipped if the SD card is already formatted and
partitioned properly.

################################################################################


Availible Drives to write images to:

#  major   minor    size   name
1:   8       16     976896 sdb

Enter Device Number: 1


sdb was selected

Checking the device is unmounted
unmounted /dev/sdb1
unmounted /dev/sdb2

sdb1  sdb2   sdb3
321268 642600


################################################################################

   Detected device has 1 partitions already

   Re-partitioning will allow the choice of 1 partitions

################################################################################

Would you like to re-partition the drive anyways [y/n] : y


Now partitioning sdb ...


################################################################################

                Now ** 1 partitions

################################################################################

记录了2048+0 的读入
记录了2048+0 的写出
1048576字节(1.0 MB)已复制，0.626457 秒，1.7 MB/秒
DISK SIZE - 1000341504 bytes
Checking that no-one is using this disk right now ...
OK

磁盘 /dev/sdb：121 个柱面，255 个磁头，63 个扇区/磁道
Old situation:
Units = mebibytes of 1048576 bytes, blocks of 1024 bytes, counting from 0

   Device Boot Start   End    MiB    #blocks   Id  System
/dev/sdb1   *     0+   313-   314-    321268+   c  W95 FAT32 (LBA)
/dev/sdb2       321+   949-   628-    642600   83  Linux
/dev/sdb3         0      -      0          0    0  空
/dev/sdb4         0      -      0          0    0  空
New situation:
Units = mebibytes of 1048576 bytes, blocks of 1024 bytes, counting from 0

   Device Boot Start   End    MiB    #blocks   Id  System
/dev/sdb1         7+   949-   942-    963900    c  W95 FAT32 (LBA)
/dev/sdb2         0      -      0          0    0  空
/dev/sdb3         0      -      0          0    0  空
/dev/sdb4         0      -      0          0    0  空
Warning: no primary partition is marked bootable (active)
This does not matter for LILO, but the DOS MBR will not boot this disk.
成功写入了新分区表

正在重新读取分区表...;

If you created or changed a DOS partition, /dev/foo7, say, then use dd(1)
to zero the first 512 bytes:  dd if=/dev/zero of=/dev/foo7 bs=512 count=1
(See fdisk(8).)

################################################################################

                Partitioning Boot

################################################################################
mkfs.vfat 3.0.12 (29 Oct 2011)

Mount the partitions

Emptying partitions

################################################################################

        Copying files now... will take minutes

################################################################################

Copying boot partition
untar update.tar.bz2 to boot partition
tar: update.tar.bz2：无法 open: 没有那个文件或目录
tar: Error is not recoverable: exiting now
Buring th u-boot.bin to sdcard
记录了500+0 的读入
记录了500+0 的写出
512000字节(512 kB)已复制，0.374236 秒，1.4 MB/秒
dd: 正在打开"boot/bin/u-boot.bin": 没有那个文件或目录

Syncing....


Un-mount the partitions

Remove created temp directories

Operation Finished


usb otg 也用不成功。 提示 iitialize operation failed,please refer to " mfgtool.log" for detailed information,error code:4

PPDDR

IMX6Q系统信息图片汇总

PPDDR

通过USB OTG烧写成功并运行成功。SD卡用1G  、8G没无更新系统。2G可以更新系统。但是更新系统后没法从MMC上启动。

PPDDR

SD 卡更新